I solved this one myself, I compiled a custom kernel and under "input devices" I enabled legacy /dev/psaux. Now my mouse works fine. On Wed, 2004-05-19 at 10:34, Patrick O. Coffey wrote: > Thanks for the info, but it didn't work for me either. and my xorg.conf > file has the same entries as jack. What else would keep a basic PS/2 > mouse from working? > > Semper Fidelis, > Patrick Coffey > > On Wed, 2004-05-19 at 03:32, Jack Spaar wrote: > > On Wed, 19 May 2004 09:01:50 +0300, Panu Matilainen wrote: > > > > > On Tue, 18 May 2004, Jack Spaar wrote: > > > > > >> I have the same problem with an upgrade from FC1. I was able to > > >> switch to a USB mouse on the fly, but can't get the ps/2 mouse working > > >> again. > > > > > > Run "/usr/sbin/fix-mouse-psaux" and restart X. That's one of those things > > > I think anaconda should be doing but didn't for me (and obviously for you > > > two neither) > > > > > > > > > Thanks Panu, but that didn't fix it for me. My xconfig has these: > > > > Section "ServerLayout" > > Identifier "Default Layout" > > Screen 0 "Screen0" 0 0 > > InputDevice "Mouse0" "CorePointer" > > InputDevice "Keyboard0" "CoreKeyboard" > > InputDevice "DevInputMice" "AlwaysCore" > > EndSection > > > > [...] > > > > Section "InputDevice" > > Identifier "Mouse0" > > Driver "mouse" > > Option "Protocol" "IMPS/2" > > Option "Device" "/dev/input/mice" > > Option "ZAxisMapping" "4 5" > > Option "Emulate3Buttons" "no" > > EndSection > > > > Section "InputDevice" > > > > # If the normal CorePointer mouse is not a USB mouse then > > # this input device can be used in AlwaysCore mode to let you > > # also use USB mice at the same time. > > Identifier "DevInputMice" > > Driver "mouse" > > Option "Protocol" "IMPS/2" > > Option "Device" "/dev/input/mice" > > Option "ZAxisMapping" "4 5" > > Option "Emulate3Buttons" "no" > > EndSection > > > > Any more clues? > > > > --Jack > > >
