I don't have a 300PL. However, I'm running FC1 on an IBM 300GL (similar vintage, I reckon) with great success - I had to specify the boot order in the BIOS to set the CD to boot first, and flashed the BIOS to the latest version (which was released in 2000, IIRC) from http://www-307.ibm.com/pc/support/site.wss/product.do?brandind=7&familyind=50025&machineind=0&operatingsystemind=49976&template=%2Fproductselection%2Flandingpages%2FdownloadsDriversLandingPage.vm&validate=true (forgive the long link) - you'll need to fill in the bottom two dropdown boxes with your type and model numbers. Ther than that, FC1's running perfectly happily on a PII 350MHz / 128Mb. It even copes with large Hard disks - I've got a 60Gb and a 120Gb drive in the machine. Double-check your install media - if in doubt, burn another copy of the ISO - I've seen some CD-ROM drives being more forgiving of errors than others. Ed ----- Original Message ----- From: "Marcel Franke" <Marcel.Franke@xxxxxxxxx> To: <fedora-list@xxxxxxxxxx> Sent: Thursday, May 13, 2004 4:18 PM Subject: IBM 300pl, install yarrow. > Hello, > > downloaded: yarrow-i386-disc1.iso > burned cd disc1 > > pc: IBM 300pl > System startup, reading cd : nothing happens > > Tested the cd disc1 in another type of pc : ok, install window > > Tested an "old" Linux install cd on the IBM 300pl : ok, install window > > Bootfloppy: downloaded bootdisk.img > put it on a floppy with rawwrite, > floppy in IBM 300pl, > system startup, reading floppy : SYSLINUX 2.06 2003-08-22 Boot failed > > Is it impossible to install the latest redhat on an IBM 300pl, or...??? > > Thanks in advance, > Marcel. > (Not bothered with much Linux experience.) > > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list >
