I have never set up a syquest syjet on Linux before but I dug an old one
out of the attic and though I would give it a shot...
A very humbling experience..
I dont even know where to start, I found some old stuff on the redhat
mailing list but when I tried to do a modprobe pd I got the following
error..
***************
/lib/modules/2.4.22-1.2188.nptl/unsupported/drivers/block/paride/pd.o:
init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.22-1.2188.nptl/unsupported/drivers/block/paride/pd.o: insmod
/lib/modules/2.4.22-1.2188.nptl/unsupported/drivers/block/paride/pd.o failed
/lib/modules/2.4.22-1.2188.nptl/unsupported/drivers/block/paride/pd.o:
insmod pd failed
[root@sid mnt]#
***************
My /proc/ioposrts reads
***************
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0800-083f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
0840-085f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
0cf8-0cff : PCI conf1
d880-d8ff : 3Com Corporation 3c905B 100BaseTX [Cyclone]
d880-d8ff : 00:11.0
dc40-dc7f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
dc40-dc7f : e100
dcb8-dcbf : Creative Labs SB Live! MIDI/Game Port
dcc0-dcdf : Creative Labs SB Live! EMU10k1
dce0-dcff : Intel Corp. 82371AB/EB/MB PIIX4 USB
dce0-dcff : usb-uhci
e000-efff : PCI Bus #01
ec00-ecff : ATI Technologies Inc 3D Rage IIC AGP
ffa0-ffaf : Intel Corp. 82371AB/EB/MB PIIX4 IDE
ffa0-ffa7 : ide0
ffa8-ffaf : ide1
****************
Im a bit of a n3wb at this stuff so be gentle
