So what do you guys think of the results I posted? Any other ideas? Avery said: > Rob, > > Thanks for your help again. After updateing the PE2650 to the latest PERC3 DC firmware > and driver I am now getting closer to the speeds I should be at. I was running firmware > version 1.91 and am now running 196T. Boy it sure runs smoother now ;) , but its still > not where it should be. Things ran really smooth on Suse I just don't get why they are > not as good with fedora after updating everything. I can see/feel the performance > difference between the 2 distro's just not as much now with the latest firmware and > driver. > > [root@mail root]# /sbin/hdparm -t /dev/sda > /dev/sda: > Timing buffered disk reads: 176 MB in 3.01 seconds = 58.47 MB/sec > [root@mail root]# /sbin/hdparm -t /dev/sda > /dev/sda: > Timing buffered disk reads: 258 MB in 3.00 seconds = 86.00 MB/sec > [root@mail root]# /sbin/hdparm -t /dev/sda > /dev/sda: > Timing buffered disk reads: 258 MB in 3.00 seconds = 86.00 MB/sec > [root@mail root]# > > -- > Avery > > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list > -- Avery
