Hello list; I am posting from W98se which feels really wierd. I installed FC2-test-2 on a good system with an Artec A4 PS/2 Trackball and lost it. The mouse does not work in command line or X. I have restarted gpm and edited the crap out of /etc/X11/XF86Config. I have searched the archives and the web and need help. I know that there is a "Test" list but my mailbox is jammed up and I cannot subscribe to it at the moment. My system is an older Athlon Classic Slot-A 650, 256M mem. Asus motherboard with the VIA chipset. Here is the info: lsmod: Module Size Used by parport_pc 20416 1 lp 9068 0 parport 36168 2 parport_pc,lp autofs4 16896 0 8139too 22016 0 mii 3712 1 8139too crc32 3968 1 8139too ipt_REJECT 4736 1 ipt_state 1536 1 ip_conntrack 24368 1 ipt_state iptable_filter 2176 1 ip_tables 13568 3 ipt_REJECT,ipt_state,iptable_filter ide_cd 32260 0 cdrom 29468 1 ide_cd floppy 53808 0 sg 28064 0 uhci_hcd 35228 0 usbcore 91956 3 uhci_hcd nls_utf8 1664 1 nls_cp437 5504 1 vfat 13184 1 fat 39328 1 vfat ext3 94888 7 jbd 65432 1 ext3 aic7xxx 146776 1 sd_mod 12832 2 scsi_mod 101564 3 sg,aic7xxx,sd_mod lspci: 00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02) 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10) 00:04.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 10) 00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 10) 00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 00:09.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) 00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a) 00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) ls -l /dev/input/mous?? crw------- 1 root root 13, 32 Feb 23 13:02 /dev/input/mouse0 crw------- 1 root root 13, 33 Feb 23 13:02 /dev/input/mouse1 ls -l /dev/ps* crw------- 1 root root 10, 1 Feb 23 13:02 /dev/psaux crw------- 1 root root 10, 1 Feb 23 13:02 /dev/psmouse ls -l /dev/mice crw------- 1 root root 13, 63 Feb 23 13:02 /dev/input/mice /etc/X11/XF86Config: # XFree86 4 configuration created by pyxf86config Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" # Option "Protocol" "ExplorerPS/2" Option "Device" "/dev/input/mice # Option "Device" "/dev/input/mouse0 # Option "Device" "/dev/input/mouse1 # Option "Device" "/dev/psaux # Option "Device" "/dev/psmouse # Option "Buttons" "5" Option "ZAxisMapping" "4 5" # Option "Emulate3Buttons" "yes" EndSection I have tried all cominations of thr commented lines in the above. It just bombs out without starting, yje above combo shows me the mouse cursor but I cannot move it or click. Thanks Mick M. The glass is exactly twice as large as it needs to be. --------------------------------- Do you Yahoo!? Yahoo! Tax Center - File online by April 15th
