Updating to Fedora Core 1, it stopped working.
When I try to mount it hangs or I get the annoying message that /dev/sda1 is not a valid block device.
- It is listed in cat /proc/bus/usb/devices T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0781 ProdID=8185 Rev= 1.25 S: Manufacturer=SanDisk Corporation S: Product=Cruzer Mini S: SerialNumber=000114391 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 70mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
- I checked that it is mapped in /dev/sda1
pr 14 15:56:32 HAL9000 kernel: usb.c: USB device 2 (vend/prod 0x781/0x8185) is not claimed by any active driver.
Apr 14 15:56:35 HAL9000 kernel: Initializing USB Mass Storage driver...
Apr 14 15:56:35 HAL9000 kernel: usb.c: registered new driver usb-storage
Apr 14 15:56:35 HAL9000 kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Apr 14 15:57:19 HAL9000 kernel: hub.c: USB device not accepting new address (error=-71)
Apr 14 15:57:20 HAL9000 kernel: usb.c: USB disconnect on device 00:10.3-2 address 2
Apr 14 15:57:20 HAL9000 kernel: hub.c: new USB device 00:10.3-2, assigned address 3
Apr 14 15:57:24 HAL9000 kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 1 channel 0 id 0 lun 0
Apr 14 15:57:24 HAL9000 kernel: USB Mass Storage support registered.
Apr 14 15:57:24 HAL9000 kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Apr 14 15:57:24 HAL9000 kernel: Vendor: Generic Model: STORAGE DEVICE Rev: 1.25
Apr 14 15:57:24 HAL9000 kernel: Type: Direct-Access ANSI SCSI revision: 02
Apr 14 15:57:24 HAL9000 kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Apr 14 15:57:25 HAL9000 kernel: SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
Apr 14 15:57:25 HAL9000 kernel: sda: Write Protect is off
Apr 14 15:57:25 HAL9000 kernel: sda: sda1
Apr 14 15:57:27 HAL9000 usb.agent[1782]: missing kernel or user mode driver usb-storage
Apr 14 15:57:36 HAL9000 su(pam_unix)[1825]: session opened for user root by chris(uid=500)
Anyone can help ?
Thanks
