James van Zeeland írta:
Dual head works fine for me: XF86Config below....you would need to edit this to make the second monitor of the AGP card a TV out instead...
Can anyone point me to a how-to on multi-console X configurations?
http://linuxconsole.sourceforge.net http://startx.times.lv/
I have such a setup, kernel 2.6.3 modified with the files from the CVS of http://linuxconsole.sourceforge.net , two PS/2 keyboards, two USB mice, two identical Samtron 96B (19") and a Radeon 9200SE/AGP8x and a Radeon 7000VE PCI. Mainboard is an MSI K8T Neo FIS2R with an Athlon64 3200+ and 512MB DDR400.
Works nicely but it's only against 2.6.3. The maintainer is tired of the rapid
changes in the console code. I tried to modify it, compiles cleanly but dies
on boot. :-(
Anyway, here are my configuration files. You have to setup gdm so it starts two X servers, look at the [servers], [server-X0] and [server-X1] sections of gdm.conf.
You also have to modify /etc/security/console.perms so owners of certain devices aren't modified. Like both users can mount/umount floppies and CDs and both can use sound applications not just the one who logs in first. Of course, you have to modify the group of these device files and put users into these groups.
Best regards, Zoltán Böszörményi
# XFree86 4 configuration created by pyxf86config #Section "ServerFlags" # Option "PciOsConfig" "1" #EndSection Section "ServerLayout" # Option "Xinerama" "on" Identifier "Default Layout" Screen 0 "Screen1" 0 0 Screen 1 "Screen0" RightOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerLayout" Identifier "First Head" Screen 0 "Screen0" 0 0 InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "SingleCard" "true" EndSection Section "ServerLayout" Identifier "Second Head" Screen 0 "Screen1" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "SingleCard" "true" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "hu" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mouse0" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mouse1" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "PnP Monitor" DisplaySize 280 210 HorizSync 30.0 - 85.0 VertRefresh 50.0 - 160.0 Option "dpms" "off" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "PnP Monitor" DisplaySize 280 210 HorizSync 30.0 - 85.0 VertRefresh 50.0 - 160.0 Option "dpms" "off" EndSection Section "Device" # this should give you some speedup :-) Identifier "Videocard1" Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon 9200SE" Option "AGPMode" "4" # Option "AGPMode" "8" Option "dpms" "off" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon 7000" Option "dpms" "off" BusID "PCI:0:6:0" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" # Modes "800x600" "640x480" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" # Modes "800x600" "640x480" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" # Modes "800x600" "640x480" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" # Modes "800x600" "640x480" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" # Modes "800x600" "640x480" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" # Modes "800x600" "640x480" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection
# GDM Configuration file. You can use gdmsetup program to graphically # edit this, or you can optionally just edit this file by hand. Note that # gdmsetup does not tweak every option here, just the ones most users # would care about. Rest is for special setups and distro specific # tweaks. If you edit this file, you should send the HUP or USR1 signal to # the daemon so that it restarts: (Assuming you have not changed PidFile) # kill -USR1 `cat /var/run/gdm.pid` # (HUP will make gdm restart immediately while USR1 will make gdm not kill # existing sessions and will only restart gdm after all users log out) # # You can also use the gdm-restart and gdm-safe-restart scripts which just # do the above for you. # # For full reference documentation see the gnome help browser under # GNOME|System category. You can also find the docs in HTML form # on http://www.jirka.org/gdm.html # # NOTE: Some of these are commented out but still show their default values. # If you wish to change them you must remove the '#' from the beginning of # the line. The commented out lines are lines where the default might # change in the future, so set them one way or another if you feel # strongly about it. # # Have fun! - George [daemon] # Automatic login, if true the first local screen will automatically logged # in as user as set with AutomaticLogin key. AutomaticLoginEnable=false AutomaticLogin= # Timed login, useful for kiosks. Log in a certain user after a certain # amount of time TimedLoginEnable=false TimedLogin= TimedLoginDelay=30 # The gdm configuration program that is run from the login screen, you should # probably leave this alone #Configurator=/usr/sbin/gdmsetup --disable-sound --disable-crash-dialog # The chooser program. Must output the chosen host on stdout, probably you # should leave this alone #Chooser=/usr/bin/gdmchooser # Greeter for local (non-xdmcp) logins. Change gdmgreeter to gdmlogin to # get the standard greeter. Greeter=/usr/bin/gdmgreeter # Greeter for xdmcp logins, usually you want a less graphically intensive # greeter here so it's better to leave this with gdmlogin #RemoteGreeter=/usr/bin/gdmlogin # Launch the greeter with an additional list of colon seperated gtk # modules. This is useful for enabling additional feature support # e.g. gnome accessibility framework. Only "trusted" modules should # be allowed to minimise security holes #AddGtkModules=false # By default these are the accessibility modules #GtkModulesList=gail:atk-bridge:dwellmouselistener:keymouselistener # Default path to set. The profile scripts will likely override this DefaultPath=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin # Default path for root. The profile scripts will likely override this RootPath=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin # If you are having trouble with using a single server for a long time and # want gdm to kill/restart the server, turn this on #AlwaysRestartServer=false # User and group that gdm should run as. Probably should be gdm and gdm and # you should create these user and group. Anyone found running this as # someone too privilaged will get a kick in the ass. This should have # access to only the gdm directories and files. User=gdm Group=gdm # To try to kill all clients started at greeter time or in the Init script. # doesn't always work, only if those clients have a window of their own #KillInitClients=true KillInitClients=false LogDir=/var/log/gdm # You should probably never change this value unless you have a weird setup PidFile=/var/run/gdm.pid # Note that a post login script is run before a PreSession script. # It is run after the login is successful and before any setup is # run on behalf of the user PostLoginScriptDir=/etc/X11/gdm/PostLogin/ PreSessionScriptDir=/etc/X11/gdm/PreSession/ PostSessionScriptDir=/etc/X11/gdm/PostSession/ DisplayInitDir=/etc/X11/gdm/Init # Distributions: If you have some script that runs an X server in say # VGA mode, allowing a login, could you please send it to me? #FailsafeXServer= # if X keeps crashing on us we run this script. The default one does a bunch # of cool stuff to figure out what to tell the user and such and can # run an X configuration program. XKeepsCrashing=/etc/X11/gdm/XKeepsCrashing # Reboot, Halt and suspend commands, you can add different commands # separated by a semicolon and gdm will use the first one it can find #RebootCommand=/sbin/reboot;/sbin/shutdown -r now;/usr/sbin/shutdown -r now;/usr/bin/reboot #HaltCommand=/sbin/poweroff;/sbin/shutdown -h now;/usr/sbin/shutdown -h now;/usr/bin/poweroff #SuspendCommand= # Probably should not touch the below this is the standard setup ServAuthDir=/var/gdm # This is our standard startup script. A bit different from a normal # X session, but it shares a lot of stuff with that. See the provided # default for more information. BaseXsession=/etc/X11/xdm/Xsession # This is a directory where .desktop files describing the sessions live # It is really a PATH style variable since 2.4.4.2 to allow actual # interoperability with KDM #SessionDesktopDir=/etc/X11/sessions/:/etc/X11/dm/Sessions/:/usr/share/xsessions/ # This is the default .desktop session. One of the ones in SessionDesktopDir DefaultSession=default.desktop # Better leave this blank and HOME will be used. You can use syntax ~/ below # to indicate home directory of the user. You can also set this to something # like /tmp if you don't want the authorizations to be in home directories. # This is useful if you have NFS mounted home directories. Note that if this # is the home directory the UserAuthFBDir will still be used in case the home # directory is NFS, see security/NeverPlaceCookiesOnNFS to override this behaviour. UserAuthDir= # Fallback if home directory not writable UserAuthFBDir=/tmp UserAuthFile=.Xauthority # The X server to use if we can't figure out what else to run. StandardXServer=/usr/X11R6/bin/X # The maximum number of flexible X servers to run. #FlexibleXServers=5 # the X nest command Xnest=/usr/X11R6/bin/Xnest -audit 0 -name Xnest # Automatic VT allocation. Right now only works on Linux. This way # we force X to use specific vts. turn VTAllocation to false if this # is causing problems. #FirstVT=7 #VTAllocation=true # Should double login be treated with a warning (and possibility to change # vts on linux systems for console logins) #DoubleLoginWarning=true [security] # If any distributions ship with this one off, they should be shot # this is only local, so it's only for say kiosk use, when you # want to minimize possibility of breakin AllowRoot=true # If you want to be paranoid, turn this one off AllowRemoteRoot=true # This will allow remote timed login AllowRemoteAutoLogin=false # 0 is the most anal, 1 allows group write permissions, 2 allows all write # permissions RelaxPermissions=0 # Number of seconds to wait after a bad login RetryDelay=1 # Maximum size of a file we wish to read. This makes it hard for a user to DoS # us by using a large file. UserMaxFile=65536 # If true this will basically append -nolisten tcp to every X command line, # a good default to have (why is this a "negative" setting? because if # it is false, you could still not allow it by setting command line of # any particular server). It's probably better to ship with this on # since most users will not need this and it's more of a security risk # then anything else. # Note: Anytime we find a -query or -indirect on the command line we do # not add a "-nolisten tcp", as then the query just wouldn't work, so # this setting only affects truly local sessions. #DisallowTCP=true # By default never place cookies if we "detect" NFS. We detect NFS # by detecting "root-squashing". It seems bad practice to place # cookies on things that go over the network by default and thus we # don't do it by default. Sometimes you can however use safe remote # filesystems where this is OK and you may want to have the cookie in your # home directory. #NeverPlaceCookiesOnNFS=true # XDMCP is the protocol that allows remote login. If you want to log into # gdm remotely (I'd never turn this on on open network, use ssh for such # remote usage that). You can then run X with -query <thishost> to log in, # or -indirect <thishost> to run a chooser. Look for the 'Terminal' server # type at the bottom of this config file. [xdmcp] # Distributions: Ship with this off. It is never a safe thing to leave # out on the net. Setting up /etc/hosts.allow and /etc/hosts.deny to only # allow local access is another alternative but not the safest. # Firewalling port 177 is the safest if you wish to have xdmcp on. # Read the manual for more notes on the security of XDMCP. Enable=false # Honour indirect queries, we run a chooser for these, and then redirect # the user to the chosen host. Otherwise we just log the user in locally. HonorIndirect=true # Maximum pending requests #MaxPending=4 #MaxPendingIndirect=4 # Maximum open XDMCP sessions at any point in time #MaxSessions=16 # Maximum wait times #MaxWait=15 #MaxWaitIndirect=15 # How many times can a person log in from a single host. Usually better to # keep low to fend off DoS attacks by running many logins from a single # host. This is now set at 2 since if the server crashes then gdm doesn't # know for some time and wouldn't allow another session. #DisplaysPerHost=2 # The number of seconds after which a non-responsive session is logged off. # Better keep this low. #PingIntervalSeconds=15 # The port. 177 is the standard port so better keep it that way #Port=177 # Willing script, none is shipped and by default we'll send # hostname system id. But if you supply something here, the # output of this script will be sent as status of this host so that # the chooser can display it. You could for example send load, # or mail details for some user, or some such. Willing=/etc/X11/gdm/Xwilling [gui] # The 'theme'. By default we're using the default gtk theme # Of course assuming that gtk got installed in the same prefix, # if not change this. GtkRC=/usr/share/themes/Bluecurve/gtk-2.0/gtkrc # Maximum size of an icon, larger icons are scaled down #MaxIconWidth=128 #MaxIconHeight=128 [greeter] # Greeter has a nice title bar that the user can move TitleBar=false # Configuration is available from the system menu of the greeter ConfigAvailable=false # Face browser is enabled. This only works currently for the # standard greeter as it is not yet enabled in the graphical greeter. Browser=false # The default picture in the browser #DefaultFace=/usr/share/pixmaps/nobody.png # These are things excluded from the face browser, not from logging in #Exclude=bin,daemon,adm,lp,sync,shutdown,halt,mail,news,uucp,operator,nobody,gdm,postgres,pvm,rpm,nfsnobody,pcap # As an alternative to the above this is the minimum uid to show MinimalUID=500 # If user or user.png exists in this dir it will be used as his picture #GlobalFaceDir=/usr/share/faces/ # File which contains the locale we show to the user. Likely you want to use # the one shipped with gdm and edit it. It is not a standard locale.alias file, # although gdm will be able to read a standard locale.alias file as well. #LocaleFile=/etc/X11/gdm/locale.alias # Logo shown in the standard greeter #Logo=/usr/share/pixmaps/gdm-foot-logo.png Logo= ## nice RH logo for the above line: /usr/share/pixmaps/redhat/shadowman-200.png # The standard greeter should shake if a user entered the wrong username or # password. Kind of cool looking #Quiver=true # The Actions menu (formerly system menu) is shown in the greeter, this is the # menu that contains reboot, shutdown, suspend, config and chooser. None of # these is available if this is off. They can be turned off individually # however #SystemMenu=true # Should the chooser button be shown. If this is shown, GDM can drop into # chooser mode which will run the xdmcp chooser locally and allow the user # to connect to some remote host. Local XDMCP does not need to be enabled # however #ChooserButton=true # Note to distributors, if you wish to have a different Welcome string # and wish to have this translated you can have entries such as # Welcome[cs]=Vitejte na %n # Just make sure the string is in utf-8 # Welcome is for all console logins and RemoteWelcome is for remote logins # (through XDMCP). # The default entries that are shipped are translated inside genius and # are as follows: #Welcome=Welcome #RemoteWelcome=Welcome to %n # Don't allow user to move the standard greeter window. Only makes sense # if TitleBar is on #LockPosition=false # Set a position rather then just centering the window. If you enter # negative values for the position it is taken as an offset from the # right or bottom edge. #SetPosition=false #PositionX=0 #PositionY=0 # Xinerama screen we use to display the greeter on. Not for true # multihead, currently only works for Xinerama. #XineramaScreen=0 # Background settings for the standard greeter: # Type can be 0=None, 1=Image, 2=Color #BackgroundType=2 #BackgroundImage= #BackgroundScaleToFit=true BackgroundColor=#20305a # XDMCP session should only get a color, this is the sanest setting since # you don't want to take up too much bandwidth #BackgroundRemoteOnlyColor=true # Program to run to draw the background in the standard greeter. Perhaps # something like an xscreensaver hack or some such. #BackgroundProgram= # if this is true then the background program is run always, otherwise # it is only run when the BackgroundType is 0 (None) #RunBackgroundProgramAlways=false # Show the Failsafe sessions. These are much MUCH nicer (focus for xterm for # example) and more failsafe then those supplied by scripts so distros should # use this rather then just running an xterm from a script. ShowGnomeFailsafeSession=false #ShowXtermFailsafeSession=true # Normally there is a session type called 'Last' that is shown which refers to # the last session the user used. If off, we will be in 'switchdesk' mode where # the session saving stuff is disabled in GDM ShowLastSession=false # Always use 24 hour clock no matter what the locale. #Use24Clock=false # Use circles in the password field. Looks kind of cool actually, # but only works with certain fonts. #UseCirclesInEntry=false # These two keys are for the new greeter. Circles is the standard # shipped theme GraphicalTheme=Bluecurve GraphicalThemeDir=/usr/share/gdm/themes/ # The chooser is what's displayed when a user wants an indirect XDMCP # session, or selects Run XDMCP chooser from the system menu [chooser] # Default image for hosts #DefaultHostImg=/usr/share/pixmaps/nohost.png # Directory with host images, they are named by the hosts: host or host.png HostImageDir=/usr/share/hosts/ # Time we scan for hosts (well only the time we tell the user we are # scanning actually, we continue to listen even after this has # expired) #ScanTime=4 # A comma separated lists of hosts to automatically add (if they answer to # a query of course). You can use this to reach hosts that broadcast cannot # reach. Hosts= # Broadcast a query to get all hosts on the current network that answer #Broadcast=true # Allow adding random hosts to the list by typing in their names #AllowAdd=true [debug] # This will enable debugging into the syslog, usually not neccessary # and it creates a LOT of spew of random stuff to the syslog. However it # can be useful in determining when something is going very wrong. Enable=false [servers] # These are the standard servers. You can add as many you want here # and they will always be started. Each line must start with a unique # number and that will be the display number of that server. Usually just # the 0 server is used. #0=Standard #1=Standard 0=X0 1=X1 # Note the VTAllocation and FirstVT keys on linux. Don't add any vt<number> # arguments if VTAllocation is on, and set FirstVT to be the first vt # available that your gettys don't grab (gettys are usually dumb and grab # even a vt that has already been taken). Using 7 will work pretty much for # all linux distributions. VTAllocation is not currently implemented on # anything but linux since I don't own any non-linux systems. Feel free to # send patches. X servers will just not get any extra arguments then. # # If you want to run an X terminal you could add an X server such as this #0=Terminal -query serverhostname # or for a chooser (optionally serverhostname could be localhost) #0=Terminal -indirect serverhostname # # If you wish to run the XDMCP chooser on the local display use the following # line #0=Chooser ## Note: # is your X server not listening to TCP requests? Perhaps you should look # at the security/DisallowTCP setting! # Definition of the standard X server. [server-Standard] name=Standard server command=/usr/X11R6/bin/X -audit 0 -layout "Default Layout" flexible=true [server-X0] name=X0 server #command=/usr/X11R6/bin/X -deferglyphs 16 -layout "First Head" -prefbusid 0:06:00 vt7 command=/usr/X11R6/bin/X -deferglyphs 16 -layout "First Head" vt7 flexible=true [server-X1] name=X1 server #command=/usr/X11R6/bin/X -deferglyphs 16 -layout "Second Head" -prefbusid 1:00:00 vt17 command=/usr/X11R6/bin/X -deferglyphs 16 -layout "Second Head" vt17 flexible=true # To use this server type you should add -query host or -indirect host # to the command line [server-Terminal] name=Terminal server # Add -terminate to make things behave more nicely command=/usr/X11R6/bin/X -audit 0 -terminate # Make this not appear in the flexible servers (we need extra params # anyway, and terminate would be bad for xdmcp choosing). You can # make a terminal server flexible, but not with an indirect query. # If you need flexible indirect query server, then you must get rid # of the -terminate and the only way to kill the flexible server will # then be by Ctrl-Alt-Backspace flexible=false # Not local, we do not handle the logins for this X server handled=false # To use this server type you should add -query host or -indirect host # to the command line [server-Chooser] name=Chooser server command=/usr/X11R6/bin/X -audit 0 # Make this not appear in the flexible servers for now, but if you # wish to allow a chooser server then make this true. This is the # only way to make a flexible chooser server that behaves nicely. flexible=false # Run the chooser instead of the greeter. When the user chooses a # machine they will get this same server but run with # "-terminate -query hostname" chooser=true
# /etc/security/console.perms
#
# This file determines the permissions that will be given to priviledged
# users of the console at login time, and the permissions to which to
# revert when the users log out.
# format is:
# <class>=list of regexps specifying consoles or globs specifying files
# file-glob|<class> perm dev-regex|<dev-class> \
# revert-mode revert-owner[.revert-group]
# the revert-mode, revert-owner, and revert-group are optional, and default
# to 0600, root, and root, respectively.
#
# For more information:
# man 5 console.perms
# file classes -- these are regular expressions
<console>=tty[0-9][0-9]* vc/[0-9][0-9]* :[0-9]\.[0-9] :[0-9]
<xconsole>=:[0-9]\.[0-9] :[0-9]
# device classes -- these are shell-style globs
#<floppy>=/dev/fd[0-1]* \
# /dev/floppy/* /mnt/floppy*
#<sound>=/dev/dsp* /dev/audio* /dev/midi* \
# /dev/mixer* /dev/sequencer \
# /dev/sound/* /dev/beep
#<cdrom>=/dev/cdrom* /dev/cdroms/* /dev/cdwriter* /mnt/cdrom*
<pilot>=/dev/pilot
<jaz>=/mnt/jaz*
<zip>=/mnt/pocketzip* /mnt/zip*
<ls120>=/dev/ls120 /mnt/ls120*
<scanner>=/dev/scanner /dev/usb/scanner*
<rio500>=/dev/usb/rio500
<camera>=/mnt/camera* /dev/usb/dc2xx* /dev/usb/mdc800*
<memstick>=/mnt/memstick*
<flash>=/mnt/flash*
<diskonkey>=/mnt/diskonkey*
<rem_ide>=/mnt/microdrive*
<fb>=/dev/fb /dev/fb[0-9]* \
/dev/fb/*
<kbd>=/dev/kbd
<joystick>=/dev/js[0-9]*
<v4l>=/dev/video* /dev/radio* /dev/winradio* /dev/vtx* /dev/vbi* \
/dev/video/*
<gpm>=/dev/gpmctl
<dri>=/dev/nvidia* /dev/3dfx*
<mainboard>=/dev/apm_bios
# permission definitions
#<console> 0660 <floppy> 0660 root.floppy
#<console> 0600 <sound> 0600 root
#<console> 0600 <cdrom> 0660 root.disk
<console> 0600 <pilot> 0660 root.uucp
<console> 0600 <jaz> 0660 root.disk
<console> 0600 <zip> 0660 root.disk
<console> 0600 <ls120> 0660 root.disk
<console> 0600 <scanner> 0600 root
<console> 0600 <camera> 0600 root
<console> 0600 <memstick> 0600 root
<console> 0600 <flash> 0600 root
<console> 0600 <diskonkey> 0660 root.disk
<console> 0600 <rem_ide> 0660 root.disk
<console> 0600 <fb> 0600 root
<console> 0600 <kbd> 0600 root
<console> 0600 <joystick> 0600 root
<console> 0600 <v4l> 0600 root
<console> 0700 <gpm> 0700 root
<console> 0600 <mainboard> 0600 root
<console> 0600 <rio500> 0600 root
<xconsole> 0600 /dev/console 0600 root.root
<xconsole> 0600 <dri> 0600 root
