Thank you Todd!!
That did the trick. I take it there is a known issue with USB and the SMP kernel, does somebody have a link to details of this?
BTW - I tried upgrading to the 2.6 kernel last night - that seemed to fix the issue as well, but we're not quite ready for 2.6 in other areas so I'm very glad to have a solution with the 2.4 kernel.
Richard
| Todd <toddb@xxxxxxxxxxxxx>
Sent by: fedora-list-bounces@xxxxxxxxxx 03/16/2004 10:33 PM
|
|
On Tue, 16 Mar 2004 rchart@xxxxxxxxxxxxxxxx wrote:
> Hi,
> I wonder if anyone can give me some pointers to resolving a problem I'm
> having when trying to run FC1 with an SMP kernel.
>
> I have an Intel SR1300 1U standard server with dual Xeon 2.8GHz, Adaptec
> 2120S SCSI controller setup for hardware RAID. It should be great
> configuration, but I'm hitting persistent problems with the server locking
> up during boot. It doesn't always happen at the same place - sometimes
> during new hardware check, or when bringing up the interfaces, or when it
> has got as far as the login prompt.
>
> I was originally running 2.4.22-1.2115 kernel. I just applied
> kernel-2.4.22-1.2174.nptl.i686.rpm and
> kernel-smp-2.4.22-1.2174.nptl.i686.rpm - but the new SMP kernel does the
> same thing. All is fine with a single proc kernel.
>
> Anybody seen this elsewhere or have a suggested resolution path?
Try commenting out the "alias usb-controller usb-ohci" in
/etc/modules.conf and reboot.
>
> Thanks!
>
> Richard Chart
>
>
>
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
