Am So, den 08.02.2004 schrieb Met @ Uber um 23:18: > So I've basically gotten everything working so that my laptop can use an > external monitor. In fact, it works almost perfectly. > > I set up a "Screen" section that holds the information about the project > I'm using (external monitor) and setup options to hold the information > about my laptop's monitor. When I "startx" the display comes up perfect > on the laptop and a bit too small on the project (Approximately 15% too > small). > > The odd part is that if I remove the twinview data (which holds my > laptop's info) from the "Screen Section" the project displays perfectly, > and my laptop's monitor is then about 60% too small. > > I've attached my XF86Config file. Any help would be appreciated, as > this is pretty hard to debug. > > ~ Matthew Maybe YanC is helpful for you: http://yanc.sourceforge.net/index-en.html If that helps not, you should try to use modelines for each monitor. There are modeline generators online, i.e.: http://www.dkfz-heidelberg.de/spec/linux/modeline/ Alexander -- Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13 Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2149.nptl Sirendipity 23:53:27 up 2:36, 7 users, 0.28, 0.12, 0.04 [ ÎÎÏÎÎ Ï'ÎÏÏÎÎ - gnothi seauton ]
