Am Mi, den 14.01.2004 schrieb Clovis Tristao um 19:13: > Hi, > I installed FC1, but the system is not recognizing the network card. I > write the command dmesg | grep - i eth0, and appears two netcard SIS900 > and Realtek RTL8201 PHY. The message that it gives is the following: > "SIOCSFFLAGS: Device or Resource busy " > I installed the WindowsXP in this machine to test if the netcard was > with problems, but the system recognized the net SIS900. > Somebody would have some idea of that it can be happening? > > Detail: I installed the FC1 in another machine with the same the > hardware and functioned. > Thanks a lot, > > Clovis What does following report: "lspci -v" (interesting is what it says about your SIS900) "cat /proc/interrupts" (interesting if IRQs are left and free or if the eth0 shares an IRQ with anything else) Do you have "PnP OS" set to yes in your motherboard BIOS? If so, set it to NO! Did you set any other IRQ settings in the BIOS? Do you use ACPI with Fedora? Alexander -- Alexander Dalloz | Enger, Germany PGP key valid: made 13.07.1999 PGP fingerprint: 2307 88FD 2D41 038E 7416 14CD E197 6E88 ED69 5653
