> Roger Grosswiler wrote: >>>Roger Grosswiler wrote: >>> >>>>Hi, >>>> >>>>I have a compaq proliant and always the same problem. my mouse is not >>>>working. as it never worked on the builting ps/2-port i installed a usb >>>>-> >>>>ps/2-adaptor (HID) . this was working fine, until i had to reinstall my >>>>server. since then: doesn't work at all. i indicated also pci=bios-irq >>>>for >>>>a working mouse.... >>>> >>> >>>[snip] >>> >>>what is the output from /sbin/lsmod? There should be the following >>>modules for a USB Mouse >>> >>>mousedev 5556 3 >>>hid 24676 0 (unused) >>>input 5760 0 [keybdev mousedev hid] >>>usb-uhci 26316 0 (unused) >>>usbcore 78176 1 [hid usb-uhci] >>> >>>To me your XF86Config looks fine. I had similar problems on RH8/9 >>>because of missing modules like HID. >>> >>> >>>>Configuration: >>>>-------------------- >>>>ps/2-mouse (generic, 2-button) connected to a port on the >>>>usb-hid-interface. >>> >>>[snip] >>> >>>Alex >>> >> >> [root@morpheus root]# /sbin/lsmod >> Module Size Used by Not tainted >> parport_pc 19076 1 (autoclean) >> lp 9060 0 (autoclean) >> parport 37056 1 (autoclean) [parport_pc lp] >> autofs 13364 0 (autoclean) (unused) >> tlan 31836 1 >> floppy 58012 0 (autoclean) >> sg 36492 0 (autoclean) >> sr_mod 18168 0 (autoclean) >> microcode 4700 0 (autoclean) >> ide-scsi 12208 0 >> ide-cd 35776 0 >> cdrom 33728 0 [sr_mod ide-cd] >> printer 8960 0 >> scanner 12056 0 (unused) >> keybdev 2976 0 (unused) >> hid 24708 0 (unused) >> usb-ohci 21512 0 (unused) >> usbcore 79168 1 [printer scanner hid usb-ohci] >> mousedev 5556 2 (autoclean) >> input 5888 0 (autoclean) [keybdev hid mousedev] >> ext3 71300 2 >> jbd 52084 2 [ext3] >> sym53c8xx 68112 5 >> sd_mod 13708 10 >> scsi_mod 108104 5 [sg sr_mod ide-scsi sym53c8xx sd_mod] >> >> ....seems to look good.....i have also connected the keyboard on the >> hid-interface, and this works fine....its just the mouse....as it is a >> very old machine, i installed fedora with pci=bios-irq, which worked >> fine, >> when i installed this machine for the first time... > > Okay, what happens when you disconnect and reconnect the mouse? > Please check it with dmesg | tail -n 20 when you removed the mouse > and when you reconnect it. if i disconnect my mouse, nothings in dmesg. but if i disconnect the hid-usb-hub, the following is in dmesg: usb.c: USB disconnect on device 01:0a.0-2 address 3 on reconnect you see: hub.c: new USB device 01:0a.0-2, assigned address 4 input: USB HID v1.10 Keyboard [MCT Corp. PS/2 - USB Interface Adaptor] on usb1:4.0 input: USB HID v1.10 Mouse [MCT Corp. PS/2 - USB Interface Adaptor] on usb1:4.1 ...and strangerwise, it works....but i do not not why.......no idea...so i hope it will not stop working like it started. do you have any idea, why it hasn't been working? did my fedora-box need some holidays?? ;-)) > >> >> thx anyway, was an idea, or perhaps i have overseen something..? >> Roger > > Alex >
