----- Original Message ----- From: "Rui Miguel Seabra" <rms@xxxxxxxx> To: <fedora-list@xxxxxxxxxx> Sent: Wednesday, January 07, 2004 12:47 PM Subject: Re: Digi Serial Card.... |These notes are for RH 7.3: | |remove the RedHat Linux module epca.o | |rebuild the latest driver straight from digi: 40001450_S.src.rpm | |DO NOT USE kgcc (or it will not work properly). This is NOT an issue, kgcc is not installed under Fedora. The problem I had to fix manualy related to this issue involved that the generated Makefile wanted to use gcc and not gcc32 to compile the module. I fixed this manually by changing the configure script to use gcc32 instead of gcc. This may not be the best way; but, it worked. | |One way to make sure temporarily is to move kgcc out of the way like |this: | | cd /usr/bin | mv kgcc kgcc.dist | ln -s gcc kgcc | |Do an rpmbuild --rebuild ....src.rpm |And set kgcc back in its place: | | cd /usr/bin | rm kgcc | mv kgcc.dist kgcc | |Install the epca-1.56 rpm |Run digiConf and answer proper answers |service epca start | |This might work on Fedora Core too. | |I do have one problem currently, which is that I can't talk with the |other side and I have minicom set to the same settings on both ends of |the machines (my /dev/ttyUSB0 and the host's /dev/ttyD000) | |Does anyone have any suggestions? Are you using RedHat 7.3 with the Digi card? | |Rui |
