|
Hello,
I checked with the usb flash disk and the results
are below:
Jan 6 16:16:13 wert kernel: hub.c: new USB
device 00:1d.1-2, assigned address 2
Jan 6 16:16:13 wert kernel: scsi2 : SCSI emulation for USB Mass Storage devices Jan 6 16:16:13 wert kernel: Vendor: Model: Rev: Jan 6 16:16:13 wert kernel:
Type:
Direct-Access
ANSI S
CSI revision: 02 Jan 6 16:16:13 wert kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 Jan 6 16:16:13 wert kernel: SCSI device sdb: 256000 512-byte hdwr sectors (131 MB) Jan 6 16:16:13 wert kernel: sdb: Write Protect is off Jan 6 16:16:13 wert kernel: sdb: sdb1 Jan 6 16:16:16 wert usb.agent[5155]: missing kernel or user mode driver usb-sto rage Jan 6 16:16:17 wert kernel: usb-uhci.c: interrupt, status 3, frame# 1171 Jan 6 16:16:17 wert kernel: sda: Unit Not Ready, sense: Jan 6 16:16:17 wert kernel: Current 00:00: sense key Not Ready Jan 6 16:16:17 wert kernel: Additional sense indicates Medium not present Jan 6 16:16:17 wert kernel: sda : READ CAPACITY failed. Jan 6 16:16:17 wert kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jan 6 16:16:17 wert kernel: Current sd00:00: sense key Not Ready Jan 6 16:16:17 wert kernel: Additional sense indicates Medium not present Jan 6 16:16:17 wert kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jan 6 16:16:17 wert kernel: sda: test WP failed, assume Write Enabled Jan 6 16:16:17 wert kernel: sda: I/O error: dev 08:00, sector 0 Jan 6 16:16:17 wert kernel: I/O error: dev 08:00, sector 0 Jan 6 16:16:17 wert kernel: unable to read partition table Jan 6 16:16:17 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:16:17 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:16:17 wert kernel: inserting floppy driver for 2.4.22-1.2115.nptl Jan 6 16:16:20 wert kernel: floppy0: no floppy controllers found Jan 6 16:16:20 wert insmod: /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/bloc k/floppy.o: init_module: No such device Jan 6 16:16:20 wert insmod: Hint: insmod errors can be caused by incorrect modu le parameters, including invalid IO or IRQ parameters. You may find more i nformation in syslog or the output from dmesg Jan 6 16:16:20 wert insmod: /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/bloc k/floppy.o: insmod block-major-2 failed Jan 6 16:16:20 wert kernel: sda: Unit Not Ready, sense: Jan 6 16:16:20 wert kernel: Current 00:00: sense key Not Ready Jan 6 16:16:20 wert kernel: Additional sense indicates Medium not present Jan 6 16:16:20 wert kernel: sda : READ CAPACITY failed. Jan 6 16:16:20 wert kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jan 6 16:16:20 wert kernel: Current sd00:00: sense key Not Ready Jan 6 16:16:20 wert kernel: Additional sense indicates Medium not present Jan 6 16:16:20 wert kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jan 6 16:16:20 wert kernel: sda: test WP failed, assume Write Enabled Jan 6 16:16:20 wert kernel: sda: I/O error: dev 08:00, sector 0 Jan 6 16:16:20 wert kernel: I/O error: dev 08:00, sector 0 Jan 6 16:16:20 wert kernel: unable to read partition table Jan 6 16:16:20 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:16:20 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:16:21 wert kernel: sda: Unit Not Ready, sense: Jan 6 16:16:21 wert kernel: Current 00:00: sense key Not Ready Jan 6 16:16:21 wert kernel: Additional sense indicates Medium not present Jan 6 16:16:22 wert kernel: sda : READ CAPACITY failed. Jan 6 16:16:22 wert kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jan 6 16:16:22 wert kernel: Current sd00:00: sense key Not Ready Jan 6 16:16:22 wert kernel: Additional sense indicates Medium not present Jan 6 16:16:22 wert kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jan 6 16:16:22 wert kernel: sda: test WP failed, assume Write Enabled Jan 6 16:16:22 wert kernel: sda: I/O error: dev 08:00, sector 0 Jan 6 16:16:22 wert kernel: I/O error: dev 08:00, sector 0 Jan 6 16:16:22 wert kernel: unable to read partition table Jan 6 16:16:22 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:16:22 wert kernel: usb-uhci.c: interrupt, status 3, frame# 59 Jan 6 16:16:22 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:16:22 wert devlabel: devlabel service started/restarted ====================================================================
Jan 6 16:16:22 wert devlabel: devlabel
service started/restarted
Jan 6 16:18:02 wert kernel: hub.c: new USB device 00:1d.1-1, assigned address 3 Jan 6 16:18:04 wert kernel: usb-uhci.c: interrupt, status 2, frame# 381 Jan 6 16:18:04 wert kernel: scsi3 : SCSI emulation for USB Mass Storage devices Jan 6 16:18:07 wert usb.agent[6007]: missing kernel or user mode driver usb-storage Jan 6 16:18:08 wert kernel: usb-uhci.c: interrupt, status 3, frame# 1563 Jan 6 16:18:08 wert kernel: sda: Unit Not Ready, sense: Jan 6 16:18:08 wert kernel: Current 00:00: sense key Not Ready Jan 6 16:18:08 wert kernel: Additional sense indicates Medium not present Jan 6 16:18:08 wert kernel: sda : READ CAPACITY failed. Jan 6 16:18:08 wert kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jan 6 16:18:08 wert kernel: Current sd00:00: sense key Not Ready Jan 6 16:18:08 wert kernel: Additional sense indicates Medium not present Jan 6 16:18:08 wert kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jan 6 16:18:08 wert kernel: sda: test WP failed, assume Write Enabled Jan 6 16:18:08 wert kernel: sda: I/O error: dev 08:00, sector 0 Jan 6 16:18:08 wert kernel: I/O error: dev 08:00, sector 0 Jan 6 16:18:08 wert kernel: unable to read partition table Jan 6 16:18:08 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:18:08 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:18:08 wert kernel: inserting floppy driver for 2.4.22-1.2115.nptl Jan 6 16:18:11 wert kernel: floppy0: no floppy controllers found Jan 6 16:18:11 wert insmod: /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/floppy.o: init_module: No such device Jan 6 16:18:11 wert insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Jan 6 16:18:11 wert insmod: /lib/modules/2.4.22-1.2115.nptl/kernel/drivers/block/floppy.o: insmod block-major-2 failed Jan 6 16:18:11 wert kernel: usb-uhci.c: interrupt, status 2, frame# 810 Jan 6 16:18:11 wert kernel: sda: Unit Not Ready, sense: Jan 6 16:18:11 wert kernel: Current 00:00: sense key Not Ready Jan 6 16:18:11 wert kernel: Additional sense indicates Medium not present Jan 6 16:18:11 wert kernel: sda : READ CAPACITY failed. Jan 6 16:18:11 wert kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jan 6 16:18:11 wert kernel: Current sd00:00: sense key Not Ready Jan 6 16:18:11 wert kernel: Additional sense indicates Medium not present Jan 6 16:18:11 wert kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jan 6 16:18:11 wert kernel: sda: test WP failed, assume Write Enabled Jan 6 16:18:11 wert kernel: sda: I/O error: dev 08:00, sector 0 Jan 6 16:18:11 wert kernel: I/O error: dev 08:00, sector 0 Jan 6 16:18:11 wert kernel: unable to read partition table Jan 6 16:18:11 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:18:11 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:18:12 wert kernel: sda: Unit Not Ready, sense: Jan 6 16:18:12 wert kernel: Current 00:00: sense key Not Ready Jan 6 16:18:12 wert kernel: Additional sense indicates Medium not present Jan 6 16:18:12 wert kernel: sda : READ CAPACITY failed. Jan 6 16:18:12 wert kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jan 6 16:18:12 wert kernel: Current sd00:00: sense key Not Ready Jan 6 16:18:12 wert kernel: Additional sense indicates Medium not present Jan 6 16:18:12 wert kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jan 6 16:18:12 wert kernel: sda: test WP failed, assume Write Enabled Jan 6 16:18:12 wert kernel: sda: I/O error: dev 08:00, sector 0 Jan 6 16:18:12 wert kernel: I/O error: dev 08:00, sector 0 Jan 6 16:18:12 wert kernel: unable to read partition table Jan 6 16:18:12 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:18:12 wert kernel: Device not ready. Make sure there is a disc in the drive. Jan 6 16:18:13 wert devlabel: devlabel service started/restarted The first part is the messages I get when inserting
the flash disk; the second, when I insert the USB HDD. Strangely, using the same
usb-storage driver, I am able to read the usb flash disk but not the USB hard
drive.
This is very strange indeed. Any suggestions on
where the problem might be?
Regards,
Andrew
|
