I just cannot make the X Server to start. :-( My XF86Config file looks
like this:
#v+
...
Section "Device"
Identifier "Videocard0"
BusID "PCI:00:18:0"
Driver "rendition"
VendorName "Videocard vendor"
BoardName "Rendition Verite 2x00"
# Chipset "v2100"
VideoRam 4096
# Option "NoDDC" "1"
EndSection
...
#v-
Other sections are OK - X works with "vga" driver.
When I do startx i get fatal error ant that's it. In logs:
#v+
...
(II) RENDITION: rendition driver (version 4.0) for chipsets: V1000,
V2100/V2200
(II) Primary Device is: PCI 00:12:0
(--) Chipset V2100/V2200 found
(II) resource ranges after xf86ClaimFixedResources() call:
...
(II) resource ranges after probing:
...
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) RENDITION(0): Initializing int10
(II) RENDITION(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(**) RENDITION(0): Depth 24, (--) framebuffer bpp 32
(==) RENDITION(0): RGB weight 888
(==) RENDITION(0): Default visual is TrueColor
(==) RENDITION(0): Using gamma correction (1.0, 1.0, 1.0)
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 4. Server aborting
#v-
And my lspci -vv looks like that:
#v+
...
00:12.0 VGA compatible controller: Rendition Verite V2000/V2100/V2200
(rev 02) (prog-if 00 [VGA])
Subsystem: Diamond Multimedia Systems Stealth II S220
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e2000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at 6c00 [size=256]
Region 2: Memory at e3000000 (32-bit, non-prefetchable)
[size=256K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] AGP version 1.0
Status: RQ=0 SBA- 64bit- FW- Rate=x1
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=x1
#v-
--
,--------,
|`. .'| Konrad Kosmowski
|.'`--'`.| K.Kosmowski@xxxxxxxxxxxxx
'--------'
