On Sun, 16 Nov 2003 00:39:27 +0100
"shrek-m@xxxxxx" <shrek-m@xxxxxx> wrote:
> Christophe Le Guern wrote:
>
> >I have a fresh install of fedora cora 1.
> >
> here too,
> no settings in /etc/sysconfig/harddisks
> # grep ^[a-zA-Z] /etc/sysconfig/harddisks
> EXTRA_PARAMS=
> # vi /usr/share/doc/initscripts-7.42/sysconfig.txt
>
for the moment, I don't have modify /etc/sysconfig/harddisks
since I don't have the good options
> >Unfortunally, the system is very slow.
> >I have play with hdparm options ( google search for my HD) without success
> >
> >if someone have the solution, I'm very interested.
> >
> >
>
> no, sorry :-(
thanks for reply !
>
> ># /sbin/hdparm -i /dev/hdb
> >
> >/dev/hdb:
> >
> > Model=Maxtor 54098U8, FwRev=DA6207V0, SerialNo=K80CP4FC
> > Config={ Fixed }
> > RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> > BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
> > CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=80041248
> > IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> > PIO modes: pio0 pio1 pio2 pio3 pio4
> > DMA modes: mdma0 mdma1 mdma2
> > UDMA modes: udma0 udma1 udma2 udma3 *udma4
> > AdvancedPM=yes: disabled (255) WriteCache=enabled
> > Drive conforms to: ATA/ATAPI-4 T13 1153D revision 17:
> >
>
> # hdparm -i /dev/hda
>
> /dev/hda:
>
> Model=IBM-DTLA-305040, FwRev=TW4OA68A, SerialNo=YJEYJ1T0230
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
> BuffType=DualPortCache, BuffSize=380kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=80418240
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1:
>
> # hdparm -i /dev/hdb
>
> /dev/hdb:
>
> Model=IC35L090AVV207-0, FwRev=V23OA63A, SerialNo=VNVC06G3C140WL
> Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
> BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
> AdvancedPM=yes: disabled (255) WriteCache=enabled
> Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:
>
> ># /sbin/hdparm /dev/hdb
> >
> >/dev/hdb:
> > multcount = 16 (on)
> > IO_support = 3 (32-bit w/sync)
> > unmaskirq = 1 (on)
> > using_dma = 1 (on)
> > keepsettings = 0 (off)
> > readonly = 0 (off)
> > readahead = 8 (on)
> > geometry = 4982/255/63, sectors = 80041248, start = 0
> >
> >
>
> # hdparm /dev/hda
>
> /dev/hda:
> multcount = 16 (on)
> IO_support = 1 (32-bit)
> unmaskirq = 1 (on)
> using_dma = 1 (on)
> keepsettings = 0 (off)
> readonly = 0 (off)
> readahead = 8 (on)
> geometry = 5005/255/63, sectors = 80418240, start = 0
>
> # hdparm /dev/hdb
>
> /dev/hdb:
> multcount = 16 (on)
> IO_support = 1 (32-bit)
> unmaskirq = 1 (on)
> using_dma = 1 (on)
> keepsettings = 0 (off)
> readonly = 0 (off)
> readahead = 8 (on)
> geometry = 10011/255/63, sectors = 160836480, start = 0
>
> ># /sbin/hdparm -tT /dev/hdb
> >
> >/dev/hdb:
> > Timing buffer-cache reads: 576 MB in 2.00 seconds = 288.00 MB/sec
> > Timing buffered disk reads: 2 MB in 14.46 seconds = 141.63 kB/sec
> >
> >
> # hdparm -tT /dev/hda
>
> /dev/hda:
> Timing buffer-cache reads: 1260 MB in 2.00 seconds = 630.00 MB/sec
> Timing buffered disk reads: 82 MB in 3.07 seconds = 26.71 MB/sec
>
> # hdparm -tT /dev/hdb
>
> /dev/hdb:
> Timing buffer-cache reads: 1264 MB in 2.00 seconds = 632.00 MB/sec
> Timing buffered disk reads: 164 MB in 3.00 seconds = 54.67 MB/sec
>
> --
> shrek-m
>
>
> --
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> http://www.redhat.com/mailman/listinfo/fedora-list
