I did both and it worked perfectly. Thanks. Give yourself a raise, Mike. Doug Lane Lane Engineering Consulting douglane@xxxxxxxxxxxxx > I had a similar problem with my card reader under RHL9. > > What I did was recompile my kernel, making sure to enable > "CONFIG_SCSI_MULTI_LUN=y" in the .config file. > > However, in response to a bugzilla report I put in on the subject, I got > this response: > > - When using RAID storage configured with Logical Unit Numbers (LUNs) > greater than zero, it is necessary to enable LUN support by adding > the following entry to the /etc/modules.conf file: > > options scsi_mod max_scsi_luns=255 > > After modifying modules.conf, it is necessary to rebuild the initial > ramdisk using `mkinitrd`. Refer to The Official Red Hat Linux > Customization Guide for more information about creating the ramdisk > image with mkinitrd. > > You might try either option. >
