I'm trying to install the following product :
vendor: Bewan
product: Adsl usb st modem
I get the driver source a bewan.fr site, compiled them
loaded the module with modprobe unicorn_usb_atm
the module seems to load ok
but when plugging in the usb cable I get (in /var/log/message)
Nov 10 21:45:48 linux kernel: hub.c: new USB device 00:10.2-2, assigned
address 4
Nov 10 21:45:48 linux kernel: usb.c: USB device 4 (vend/prod
0x7fa/0x1012) is not claimed by any active driver.
Nov 10 21:45:51 linux usb.agent[9051]: ... no modules for USB product
7fa/1012/100
This modem is reported to work on mandrake 9.1 and knoppix 3.2
looking at the windows drivers in the setup.ini file I've found:
[...]
HardwareDeviceId1 = "PCI\VEN_104A&DEV_0500&SUBSYS_A888104A&REV_10"
HardwareDeviceId2 = "PCI\VEN_104A&DEV_0500&SUBSYS_A889104A&REV_10"
HardwareDeviceId3 = "USB\VID_07FA&PID_A904&REV_0100"
HardwareDeviceId4 = "USB\VID_07FA&PID_A905&REV_0100"
HardwareDeviceId5 = "USB\VID_07FA&PID_1012&REV_0100"
looking at the linux sources I found
static struct usb_device_id unicorn_usb_ids[] = {
{ USB_DEVICE(0x0483, 0x0137) }, // STMicro reference design
{ USB_DEVICE(0x07FA, 0xA904) }, // BeWAN
{ USB_DEVICE(0x07FA, 0xA905) }, // BeWAN
{ }
};
I'm suspecting hardware to have changed, maybe adding a line like
{ USB_DEVICE(0x07FA, 0x1012) } in unicorn_usb_ids would help....
I've rebuild the drivers, the device is now probed but doesn't work
ok... I know it's probably not the right place to ask but don't know a
better one...
Can anybody help me ?
Sincerely
Jean-FranÃois Morcillo
