I just install the latest RH9 and have some problem with my SCSI adapter,
an Adaptec 19160. Does someone have any idea on how to solve this problem
and if Fedora 1.0 would solve it?
Dec 23 23:58:15 localhost kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI
SCSI HBA DRIVER, Rev 6.3.3
Dec 23 23:58:15 localhost kernel: <Adaptec 19160B Ultra160 SCSI
adapter>
Dec 23 23:58:15 localhost kernel: aic7892: Ultra160 Wide Channel
A, SCSI Id=11, 32/253 SCBs
Dec 23 23:58:15 localhost kernel:
Dec 23 23:58:15 localhost kernel: blk: queue dfd6a614, I/O limit 4095Mb
(mask 0xffffffff)
Dec 23 23:58:15 localhost kernel: (scsi0:A:4): 40.000MB/s transfers
(20.000MHz, offset 63, 16bit)
Dec 23 23:58:15 localhost kernel: (scsi0:A:4): 20.000MB/s transfers
(20.000MHz, offset 63)
Dec 23 23:58:15 localhost kernel: Vendor: SEAGATE Model: SX173404LC
Rev: BD13
Dec 23 23:58:15 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 03
Dec 23 23:58:15 localhost kernel: blk: queue dfd6b214, I/O limit 4095Mb
(mask 0xffffffff)
Dec 23 23:58:15 localhost kernel: scsi0:A:4:0: Tagged Queuing enabled.
Depth 32
Dec 23 23:58:15 localhost kernel: Attached scsi disk sda at scsi0, channel
0, id 4, lun 0
Dec 23 23:58:15 localhost kernel: sda : READ CAPACITY failed.
Dec 23 23:58:15 localhost kernel: sda : status = 4, message = 00, host =
0, driver = 00
Dec 23 23:58:15 localhost kernel: sda : sense not available.
Dec 23 23:58:15 localhost kernel: sda : block size assumed to be 512
bytes, disk size 1GB.
Dec 23 23:58:15 localhost kernel: sda:SCSI disk error : host 0 channel 0
id 4 lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 0
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 2
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 4
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 6
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 0
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 2
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 4
Dec 23 23:58:16 localhost kernel: SCSI disk error : host 0 channel 0 id 4
lun 0 return code = 8
Dec 23 23:58:16 localhost kernel: I/O error: dev 08:00, sector 6
Dec 23 23:58:16 localhost kernel: unable to read partition table
