Hi There are a large number of cheap laser printers which work with linux (ie Samsung, Brother, Hp) and nearly every ink jet works as well. It is best to choose a good, simple device and a multi-function printer. I personally would recommend Epson C64/80/84 inkjets and Brother lasers. I hope this helps, checkout http://www.linuxprinting.com for further help. Simon On Thu, 2003-12-18 at 14:45, mr mike wrote: > MY $0.02, > > The Samsung ML-1430 is a nice cheap laser printer, I got mine for under > $100 with rebates. You just have to choose the GDI driver > with printconfig and not use the Samsung RPMS. > > mike > > > > After the whole Lexmark toner cartridge debacle, I wouldn't recommend going > > back to them. I've got an Epson Perfection 1260 inkjet that works right out > > of the box with FC1. There's no additional software to install. If you > > hook up the printer via the parallel port, FC1 auto-recognizes the printer > > and you hardly have to do anything to set it up. Also, the ink colors are > > separate so if you run out of one color you don't have to buy any other > > colors too. > > > > I've also used a Brother 1270N laser printer. It works well, but I'm > > guessing there are cheaper laser printers that work just as well out there. > > > > Good luck. > > > > > > -- > > fedora-list mailing list > > fedora-list@xxxxxxxxxx > > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list > > > > > -- > fedora-list mailing list > fedora-list@xxxxxxxxxx > To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list -- Simon Windsor Tel: 01454 6176789 Mob: 07720 447385 Eml: simon.windsor@xxxxxxxxxxxxxxxx -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. Mailscanner thanks transtec Computers for their support.
