Re: howto: firewall for ppp interface only and accept all eth-traffic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2003-12-08 at 15:06, A.J. Bonnema wrote:
> Hi guys,
> 
> I read your advice on using firewall tools, so I started using 
> firestarter. Now I have the following problem. My network has two 
> internet connections I might use:
> 
> 1. eth1 = internal traffic + traffic from the internet through a 
> physical router/firewall
> 
> 2. A connection through my telefone line which I will use if the ADSL 
> connection is down.
> 
> So what I need is for all traffic from the eth1-card to be accepted and 
> all traffic from the telefone line to be scrutenized by the fire wall.

If you want to allow all traffic from eth1 card to be accepted then you
don't want a firewall at all, except when you're using the telephone
line/modem.  If this is the case then set up your firewall in
firestarter to be very restrictive (only applying to the modem dial-up
connection) and on the second page of the wizard, choose "ppp0" (or
similar) and tick 'Start the firewall on dial-out'.  Go through the rest
of the wizard relating to ppp0 (blocking just about everything).

Cheers,

Daniel




> Using firestarter, does anyone know how to do this?
> 
> Guus.
-- 
Daniel Hedlund
daniel@xxxxxxxxxxxx
CEO & Chief Consultant
DigiTree Studios Pty Ltd.





[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux