Islam Amer wrote:
Hello.
I was interested in getting dynticks to work on my compaq presario v6000
to help with the 1 hour thirty minutes battery time, but after this
discussion I lost interest.
I too had the early boot time hang, and found it was udev triggering the
bug.
This early boot time hang is *almost certainly* due to the in/out port
80 bug, which I discovered a few weeks ago, which affects hwclock and
other I/O device drivers on a number of HP/Compaq machines in exactly
this way. The proper fix for this bug is in dispute, and will probably
not occur in the 2.6.24 release because it touches code in many, many
drivers. The simplest way to test if you have a problem of this sort is
to try this shell line as root, after you boot successfully. If your
machine hangs hard, you have a problem that really looks like the port
80 problem.
for ((i = 0; i < 1000; i = i + 1)); do cat /dev/nvram > /dev/null; done
I have also attached a c program that only touches port 80. Compile it
for 32-bit mode (see comment), run it as root, and after two or three
runs, it will hang a system that has the port 80 bug.
If you then run:
dmidecode -s baseboard-manufacturer
dmidecode -s baseboard-product-name
are the values you should plug into the .matches field in the
dmi_system_id struct in the attached patch. It would be great if you
could do that, test, and post back with those values so they can be
accumulated. HP/Compaq machines with quanta m/b's are very popular, and
very common - so at least a quirk patch for all the broken models would
be worth doing in 2.6.25 or downstream in the distros. The right
patches will probably take a long time - there is a dispute as to what
the semantics of port 80 writes even mean among the core kernel
developers, because the hack is lost in the dim dark days of history,
and safe resolution will take time
There is also a C1E issue with the BIOS in my machine (an HP Pavilion
dv9000z). I don't know if it is a bug, yet, but that's a different
problem - associated with dynticks, perhaps. I have to say that
researching the AMD Kernel/BIOS docs on C1E (a very new feature in the
last year on AMD) leaves me puzzled as to whether the dynticks problem
exists on my machine at all, but the patch for it turns off dynticks!
Changing the /etc/init.d/udev script so that the line containing
/sbin/udevtrigger
to
/sbin/udevtrigger --subsystem-nomatch="*misc*"
seemed to fix things.
the hang is triggered specifically by
echo add > /sys/class/misc/rtc/uevent
after inserting rtc.ko
Also using hwclock to set the rtc , will cause a hard hang, if you are
using 64bit linux. Disable the init scripts that set the time, or use
the 32bit binary, as suggested here :
http://www.mail-archive.com/[email protected]/msg41964.html
I hope this helps. But your hardware is slightly different though.
commit c12c7a47b9af87e8d867d5aa0ca5c6bcdd2463da
Author: Rene Herman <[email protected]>
Date: Mon Dec 17 21:23:55 2007 +0100
x86: provide a DMI based port 0x80 I/O delay override.
Certain (HP) laptops experience trouble from our port 0x80 I/O delay
writes. This patch provides for a DMI based switch to the "alternate
diagnostic port" 0xed (as used by some BIOSes as well) for these.
David P. Reed confirmed that port 0xed works for him and provides a
proper delay. The symptoms of _not_ working are a hanging machine,
with "hwclock" use being a direct trigger.
Earlier versions of this attempted to simply use udelay(2), with the
2 being a value tested to be a nicely conservative upper-bound with
help from many on the linux-kernel mailinglist, but that approach has
two problems.
First, pre-loops_per_jiffy calibration (which is post PIT init while
some implementations of the PIT are actually one of the historically
problematic devices that need the delay) udelay() isn't particularly
well-defined. We could initialise loops_per_jiffy conservatively (and
based on CPU family so as to not unduly delay old machines) which
would sort of work, but still leaves:
Second, delaying isn't the only effect that a write to port 0x80 has.
It's also a PCI posting barrier which some devices may be explicitly
or implicitly relying on. Alan Cox did a survey and found evidence
that additionally various drivers are racy on SMP without the bus
locking outb.
Switching to an inb() makes the timing too unpredictable and as such,
this DMI based switch should be the safest approach for now. Any more
invasive changes should get more rigid testing first. It's moreover
only very few machines with the problem and a DMI based hack seems
to fit that situation.
An early boot parameter to make the choice manually (and override any
possible DMI based decision) is also provided:
io_delay=standard|alternate
This does not change the io_delay() in the boot code which is using
the same port 0x80 I/O delay but those do not appear to be a problem
as tested by David P. Reed. He moreover reported that booting with
"acpi=off" also fixed things and seeing as how ACPI isn't touched
until after this DMI based I/O port switch leaving the ones in the
boot code be is safe.
The DMI strings from David's HP Pavilion dv9000z are in there already
and we need to get/verify the DMI info from other machines with the
problem, notably the HP Pavilion dv6000z.
This patch is partly based on earlier patches from Pavel Machek and
David P. Reed.
Signed-off-by: Rene Herman <[email protected]>
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 33121d6..6948e25 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -785,6 +785,12 @@ and is between 256 and 4096 characters. It is defined in the file
for translation below 32 bit and if not available
then look in the higher range.
+ io_delay= [X86-32,X86-64] I/O delay port
+ standard
+ Use the 0x80 standard I/O delay port (default)
+ alternate
+ Use the 0xed alternate I/O delay port
+
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
diff --git a/arch/x86/boot/compressed/misc_32.c b/arch/x86/boot/compressed/misc_32.c
index b74d60d..288e162 100644
--- a/arch/x86/boot/compressed/misc_32.c
+++ b/arch/x86/boot/compressed/misc_32.c
@@ -276,10 +276,10 @@ static void putstr(const char *s)
RM_SCREEN_INFO.orig_y = y;
pos = (x + cols * y) * 2; /* Update cursor position */
- outb_p(14, vidport);
- outb_p(0xff & (pos >> 9), vidport+1);
- outb_p(15, vidport);
- outb_p(0xff & (pos >> 1), vidport+1);
+ outb(14, vidport);
+ outb(0xff & (pos >> 9), vidport+1);
+ outb(15, vidport);
+ outb(0xff & (pos >> 1), vidport+1);
}
static void* memset(void* s, int c, unsigned n)
diff --git a/arch/x86/boot/compressed/misc_64.c b/arch/x86/boot/compressed/misc_64.c
index 6ea015a..43e5fcc 100644
--- a/arch/x86/boot/compressed/misc_64.c
+++ b/arch/x86/boot/compressed/misc_64.c
@@ -269,10 +269,10 @@ static void putstr(const char *s)
RM_SCREEN_INFO.orig_y = y;
pos = (x + cols * y) * 2; /* Update cursor position */
- outb_p(14, vidport);
- outb_p(0xff & (pos >> 9), vidport+1);
- outb_p(15, vidport);
- outb_p(0xff & (pos >> 1), vidport+1);
+ outb(14, vidport);
+ outb(0xff & (pos >> 9), vidport+1);
+ outb(15, vidport);
+ outb(0xff & (pos >> 1), vidport+1);
}
static void* memset(void* s, int c, unsigned n)
diff --git a/arch/x86/kernel/Makefile_32 b/arch/x86/kernel/Makefile_32
index a7bc93c..0cc1981 100644
--- a/arch/x86/kernel/Makefile_32
+++ b/arch/x86/kernel/Makefile_32
@@ -8,7 +8,7 @@ CPPFLAGS_vmlinux.lds += -Ui386
obj-y := process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
pci-dma_32.o i386_ksyms_32.o i387_32.o bootflag.o e820_32.o\
- quirks.o i8237.o topology.o alternative.o i8253.o tsc_32.o
+ quirks.o i8237.o topology.o alternative.o i8253.o tsc_32.o io_delay.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
diff --git a/arch/x86/kernel/Makefile_64 b/arch/x86/kernel/Makefile_64
index 5a88890..08a68f0 100644
--- a/arch/x86/kernel/Makefile_64
+++ b/arch/x86/kernel/Makefile_64
@@ -11,7 +11,7 @@ obj-y := process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \
setup64.o bootflag.o e820_64.o reboot_64.o quirks.o i8237.o \
pci-dma_64.o pci-nommu_64.o alternative.o hpet.o tsc_64.o bugs_64.o \
- i8253.o
+ i8253.o io_delay.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
new file mode 100644
index 0000000..5029e7a
--- /dev/null
+++ b/arch/x86/kernel/io_delay.c
@@ -0,0 +1,69 @@
+/*
+ * I/O delay strategies for inb_p/outb_p
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <asm/io.h>
+
+/*
+ * Allow for a DMI based override of port 0x80
+ */
+#define IO_DELAY_PORT_STD 0x80
+#define IO_DELAY_PORT_ALT 0xed
+
+static unsigned short io_delay_port __read_mostly = IO_DELAY_PORT_STD;
+
+void native_io_delay(void)
+{
+ asm volatile ("outb %%al, %w0" : : "d" (io_delay_port));
+}
+EXPORT_SYMBOL(native_io_delay);
+
+static int __init dmi_io_delay_port_alt(const struct dmi_system_id *id)
+{
+ printk(KERN_NOTICE "%s: using alternate I/O delay port\n", id->ident);
+ io_delay_port = IO_DELAY_PORT_ALT;
+ return 0;
+}
+
+static struct dmi_system_id __initdata dmi_io_delay_port_alt_table[] = {
+ {
+ .callback = dmi_io_delay_port_alt,
+ .ident = "HP Pavilion dv9000z",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30B9")
+ }
+ },
+ {
+ }
+};
+
+static int __initdata io_delay_override;
+
+static int __init io_delay_param(char *s)
+{
+ if (!s)
+ return -EINVAL;
+
+ if (!strcmp(s, "standard"))
+ io_delay_port = IO_DELAY_PORT_STD;
+ else if (!strcmp(s, "alternate"))
+ io_delay_port = IO_DELAY_PORT_ALT;
+ else
+ return -EINVAL;
+
+ io_delay_override = 1;
+ return 0;
+}
+
+early_param("io_delay", io_delay_param);
+
+void __init io_delay_init(void)
+{
+ if (!io_delay_override)
+ dmi_check_system(dmi_io_delay_port_alt_table);
+}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index e1e18c3..6c3a3b4 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -648,6 +648,8 @@ void __init setup_arch(char **cmdline_p)
dmi_scan_machine();
+ io_delay_init();;
+
#ifdef CONFIG_X86_GENERICARCH
generic_apic_probe();
#endif
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 30d94d1..ec976ed 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -311,6 +311,8 @@ void __init setup_arch(char **cmdline_p)
dmi_scan_machine();
+ io_delay_init();
+
#ifdef CONFIG_SMP
/* setup to use the static apicid table during kernel startup */
x86_cpu_to_apicid_ptr = (void *)&x86_cpu_to_apicid_init;
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index fe881cd..690b8f4 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -250,10 +250,8 @@ static inline void flush_write_buffers(void)
#endif /* __KERNEL__ */
-static inline void native_io_delay(void)
-{
- asm volatile("outb %%al,$0x80" : : : "memory");
-}
+extern void io_delay_init(void);
+extern void native_io_delay(void);
#if defined(CONFIG_PARAVIRT)
#include <asm/paravirt.h>
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index a037b07..b2d4994 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -35,13 +35,18 @@
* - Arnaldo Carvalho de Melo <[email protected]>
*/
-#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
+extern void io_delay_init(void);
+extern void native_io_delay(void);
+static inline void slow_down_io(void)
+{
+ native_io_delay();
#ifdef REALLY_SLOW_IO
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
-#else
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
+ native_io_delay();
+ native_io_delay();
+ native_io_delay();
#endif
+}
/*
* Talk about misusing macros..
@@ -50,21 +55,21 @@
static inline void out##s(unsigned x value, unsigned short port) {
#define __OUT2(s,s1,s2) \
-__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
+__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1" : : "a" (value), "Nd" (port))
#define __OUT(s,s1,x) \
-__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
-__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} \
+__OUT1(s,x) __OUT2(s,s1,"w"); } \
+__OUT1(s##_p,x) __OUT2(s,s1,"w"); slow_down_io(); }
#define __IN1(s) \
static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
#define __IN2(s,s1,s2) \
-__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
+__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0" : "=a" (_v) : "Nd" (port))
-#define __IN(s,s1,i...) \
-__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
+#define __IN(s,s1) \
+__IN1(s) __IN2(s,s1,"w"); return _v; } \
+__IN1(s##_p) __IN2(s,s1,"w"); slow_down_io(); return _v; }
#define __INS(s) \
static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
/* gcc -W -Wall -O2 -m32 -o port80 port80.c */
#include <stdlib.h>
#include <stdio.h>
#include <sys/io.h>
#define LOOPS 10000
inline unsigned long long rdtsc(void)
{
unsigned long long tsc;
asm volatile ("rdtsc": "=A" (tsc));
return tsc;
}
inline void serialize(void)
{
asm volatile ("cpuid": : : "eax", "ebx", "ecx", "edx");
}
int main(void)
{
unsigned long long start;
unsigned long long overhead;
unsigned long long output;
unsigned long long input;
int i;
if (iopl(3) < 0) {
perror("iopl");
return EXIT_FAILURE;
}
asm volatile ("cli");
start = rdtsc();
for (i = 0; i < LOOPS; i++) {
serialize();
serialize();
}
overhead = rdtsc() - start;
start = rdtsc() + overhead;
for (i = 0; i < LOOPS; i++) {
serialize();
asm volatile ("outb %al, $0x80");
serialize();
}
output = rdtsc() - start;
start = rdtsc() + overhead;
for (i = 0; i < LOOPS; i++) {
serialize();
asm volatile ("inb $0x80, %%al": : : "al");
serialize();
}
input = rdtsc() - start;
asm volatile ("sti");
output /= LOOPS;
input /= LOOPS;
printf("cycles: out %llu, in %llu\n", output, input);
return EXIT_SUCCESS;
}
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
