[email protected] wrote:
>
> I don't know what happened before, but after a reboot, I can't repeat
> the 200 kB/s speed. It's back down to 40 kB/s, just like originally. I
> didn't move the laptop, or the ap, the only thing I can think of that
> might have changed is the noise level. FWIW, link quality is
> consistently the same or better with b43.
>
> Anyway, I'd noticed before that the bit rate starts at 1 Mb/s and
> quickly scales to 11 Mb/s, but I tried setting it manually anyway and
> didn't see any change. In fact, I set the rate to 5.5 Mb/s as well as
> 1 Mb/s and the download speed was the same with all three (around
> 30-40 kB/s).
I hope that you have now convinced yourself that you should be using b43 and not messing around
forcing b43legacy to use a device for which it was not intended. I left that back door in the code
because I wanted to test b43legacy on a computer that could build a kernel in 20 minutes, as
compared to the 12 hours that my old laptop with the device that needs b43legacy. I forgot to clean
up the code as I should have.
You should concentrate on what in your environment changed when you rebooted. If you can get the 200
kBs rate back, please note the noise and signal levels as compared to the values when you are
restricted to 40 kBs.
Is it possible for you to test your laptop on another AP?
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
