Signed-off-by: Joe Perches <[email protected]>
---
drivers/char/drm/r300_reg.h | 2 +-
drivers/char/drm/via_dma.c | 2 +-
drivers/char/efirtc.c | 2 +-
drivers/char/epca.c | 4 ++--
drivers/char/hangcheck-timer.c | 2 +-
drivers/char/hvcs.c | 2 +-
drivers/char/ip2/i2lib.c | 2 +-
drivers/char/ip2/ip2main.c | 2 +-
drivers/char/synclink.c | 2 +-
drivers/char/toshiba.c | 2 +-
10 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h
index 3ae57ec..fa194a4 100644
--- a/drivers/char/drm/r300_reg.h
+++ b/drivers/char/drm/r300_reg.h
@@ -584,7 +584,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
#define R300_RE_FOG_START 0x4298
/* Not sure why there are duplicate of factor and constant values.
- * My best guess so far is that there are seperate zbiases for test and write.
+ * My best guess so far is that there are separate zbiases for test and write.
* Ordering might be wrong.
* Some of the tests indicate that fgl has a fallback implementation of zbias
* via pixel shaders.
diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c
index 75d6b74..7009dbd 100644
--- a/drivers/char/drm/via_dma.c
+++ b/drivers/char/drm/via_dma.c
@@ -400,7 +400,7 @@ static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv,
}
/*
- * This function is used internally by ring buffer mangement code.
+ * This function is used internally by ring buffer management code.
*
* Returns virtual pointer to ring buffer.
*/
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 004141d..49233f5 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -18,7 +18,7 @@
*
* NOTES:
* - Locking is required for safe execution of EFI calls with regards
- * to interrrupts and SMP.
+ * to interrupts and SMP.
*
* TODO (December 1999):
* - provide the API to set/get the WakeUp Alarm (different from the
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index ffcecde..ffd747c 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -1797,7 +1797,7 @@ static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
/*
* This gets a little confusing. The Digi cards have their own
- * representation of c_cflags controling baud rate. For the most part
+ * representation of c_cflags controlling baud rate. For the most part
* this is identical to the Linux implementation. However; Digi
* supports one rate (76800) that Linux doesn't. This means that the
* c_cflag entry that would normally mean 76800 for Digi actually means
@@ -2068,7 +2068,7 @@ static int info_ioctl(struct tty_struct *tty, struct file *file,
{
/*
* This call is made by the apps to complete the
- * initilization of the board(s). This routine is
+ * initialization of the board(s). This routine is
* responsible for setting the card to its initial
* state and setting the drivers control fields to the
* sutianle settings for the card in question.
diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c
index 0e8ceea..712d9f2 100644
--- a/drivers/char/hangcheck-timer.c
+++ b/drivers/char/hangcheck-timer.c
@@ -26,7 +26,7 @@
* The hangcheck-timer driver uses the TSC to catch delays that
* jiffies does not notice. A timer is set. When the timer fires, it
* checks whether it was delayed and if that delay exceeds a given
- * margin of error. The hangcheck_tick module paramter takes the timer
+ * margin of error. The hangcheck_tick module parameter takes the timer
* duration in seconds. The hangcheck_margin parameter defines the
* margin of error, in seconds. The defaults are 60 seconds for the
* timer and 180 seconds for the margin of error. IOW, a timer is set
diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c
index 69d8866..59a9f7a 100644
--- a/drivers/char/hvcs.c
+++ b/drivers/char/hvcs.c
@@ -850,7 +850,7 @@ static int __devexit hvcs_remove(struct vio_dev *dev)
if (!hvcsd)
return -ENODEV;
- /* By this time the vty-server won't be getting any more interrups */
+ /* By this time the vty-server won't be getting any more interrupts */
spin_lock_irqsave(&hvcsd->lock, flags);
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index e46120d..d6567b3 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -661,7 +661,7 @@ i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
if (!in_interrupt()) {
schedule_timeout_interruptible(1); // short nap
} else {
- // we cannot sched/sleep in interrrupt silly
+ // we cannot sched/sleep in interrupt silly
return 0;
}
if (signal_pending(current)) {
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index e04e66c..0f49ccf 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -1251,7 +1251,7 @@ ip2_poll(unsigned long arg)
// Just polled boards, IRQ = 0 will hit all non-interrupt boards.
// It will NOT poll boards handled by hard interrupts.
- // The issue of queued BH interrups is handled in ip2_interrupt().
+ // The issue of queued BH interrupts is handled in ip2_interrupt().
ip2_polled_interrupt();
PollTimer.expires = POLL_TIMEOUT;
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 905d1f5..d010ed9 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -1544,7 +1544,7 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
/* mgsl_isr_misc()
*
- * Service a miscellaneos interrupt source.
+ * Service a miscellaneous interrupt source.
*
* Arguments: info pointer to device extension (instance data)
* Return Value: None
diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
index 5422f99..ce5ebe3 100644
--- a/drivers/char/toshiba.c
+++ b/drivers/char/toshiba.c
@@ -505,7 +505,7 @@ static int __init toshiba_init(void)
if (tosh_probe())
return -ENODEV;
- printk(KERN_INFO "Toshiba System Managment Mode driver v" TOSH_VERSION "\n");
+ printk(KERN_INFO "Toshiba System Management Mode driver v" TOSH_VERSION "\n");
/* set the port to use for Fn status if not specified as a parameter */
if (tosh_fn==0x00)
--
1.5.3.7.949.g2221a6
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
