I did a bit more work and investigation on this and it turns out I could
not read the mmio in kernel space because I had not done a
pci_enable_device_bars() on the device. I had never done this on x86 so
I didn't realize it was necessary.
> The virtual address 0xc0300000 looks sensible and the physical address
> 0x24000000 is consistent with what you found in the BAR registers. So that
> all looks reasonable but that only means not obviously wrong. So next I
> wonder what the value of PCI_MMIO_BASE is ...
The PCI_MMIO_BASE is a defined as:
> #define PCI_MMIO_BASE (0x00040000)
This is define in the technical documentation as the offset to access
pci config space from the mmio. I am using this because I know what the
values should be so it provides a nice sanity check.
> A bus error is an exception which is signalled by agent external (often
> called system controller) to the CPU core to signal a fatal error during a
> read or write bus transaction, for example after a bus timeout or if the
> address of the read/write isn't assigned to any device. PCI master abort
> also is often mapped to a bus error exception.
So after doing pci_enable_bars() I can now access this mmio region in
kernel space. However, if I try to mmap this into user space I still
receive the bus error. I am mapping this into user space using the
example for LDD which says to use the remap_pfn_range() function. I've
tested this on the x86 and it works as expected, however every time I
access the mmio from user space using the mips, I continue to get the
bus error I previously received in kernel space.
Any idea what I might be doing wrong? How can I access this from user
space?
Thanks,
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]