sata_mv not working with a RocketRaid 2220

Hello,

I'm trying to get my HighPoint RocketRaid Controller working with thesata_mv drivers.

But something is not working correctly :(

Kernel version 2.6.23.11 (also tried 2.6.24-rc5 with same results)

Controller in lspci: Marvell Technology Group Ltd. MV88SX6081 8-portSATA II PCI-X Controller (rev 07)


  1.
     Dec 16 22:44:29 localhost kernel: sata_mv 0000:05:08.0: Gen-II 32
     slots 8 ports SCSI mode IRQ via INTx
  2.
     Dec 16 22:44:29 localhost kernel: scsi4 : sata_mv
  3.
     Dec 16 22:44:29 localhost kernel: scsi5 : sata_mv
  4.
     Dec 16 22:44:29 localhost kernel: scsi6 : sata_mv
  5.
     Dec 16 22:44:29 localhost kernel: scsi7 : sata_mv
  6.
     Dec 16 22:44:29 localhost kernel: scsi8 : sata_mv
  7.
     Dec 16 22:44:29 localhost kernel: scsi9 : sata_mv
  8.
     Dec 16 22:44:29 localhost kernel: scsi10 : sata_mv
  9.
     Dec 16 22:44:29 localhost kernel: scsi11 : sata_mv
 10.
     Dec 16 22:44:29 localhost kernel: ata5: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010122120 bmdma 0x0000000000000000
     irq 16
 11.
     Dec 16 22:44:29 localhost kernel: ata6: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010124120 bmdma 0x0000000000000000
     irq 16
 12.
     Dec 16 22:44:29 localhost kernel: ata7: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010126120 bmdma 0x0000000000000000
     irq 16
 13.
     Dec 16 22:44:29 localhost kernel: ata8: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010128120 bmdma 0x0000000000000000
     irq 16
 14.
     Dec 16 22:44:29 localhost kernel: ata9: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010132120 bmdma 0x0000000000000000
     irq 16
 15.
     Dec 16 22:44:29 localhost kernel: ata10: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010134120 bmdma 0x0000000000000000
     irq 16
 16.
     Dec 16 22:44:29 localhost kernel: ata11: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010136120 bmdma 0x0000000000000000
     irq 16
 17.
     Dec 16 22:44:29 localhost kernel: ata12: SATA max UDMA/133 cmd
     0x0000000000000000 ctl 0xffffc20010138120 bmdma 0x0000000000000000
     irq 16
 18.
     Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 19.
     Dec 16 22:44:29 localhost kernel: ata5.00: ATA-7: SAMSUNG SP2504C,
     VT100-33, max UDMA7
 20.
     Dec 16 22:44:29 localhost kernel: ata5.00: 488397168 sectors,
     multi 0: LBA48 NCQ (depth 0/32)
 21.
     Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
 22.
     Dec 16 22:44:29 localhost kernel: ata6: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 23.
     Dec 16 22:44:29 localhost kernel: ata6.00: ATA-7: SAMSUNG SP2504C,
     VT100-33, max UDMA7
 24.
     Dec 16 22:44:29 localhost kernel: ata6.00: 488397168 sectors,
     multi 0: LBA48 NCQ (depth 0/32)
 25.
     Dec 16 22:44:29 localhost kernel: ata6.00: configured for UDMA/133
 26.
     Dec 16 22:44:29 localhost kernel: ata7: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 27.
     Dec 16 22:44:29 localhost kernel: ata7.00: ATA-7: SAMSUNG SP2504C,
     VT100-33, max UDMA7
 28.
     Dec 16 22:44:29 localhost kernel: ata7.00: 488397168 sectors,
     multi 0: LBA48 NCQ (depth 0/32)
 29.
     Dec 16 22:44:29 localhost kernel: ata7.00: configured for UDMA/133
 30.
     Dec 16 22:44:29 localhost kernel: ata8: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 31.
     Dec 16 22:44:29 localhost kernel: ata8.00: ATA-7: SAMSUNG SP2504C,
     VT100-33, max UDMA7
 32.
     Dec 16 22:44:29 localhost kernel: ata8.00: 488397168 sectors,
     multi 0: LBA48 NCQ (depth 0/32)
 33.
     Dec 16 22:44:29 localhost kernel: ata8.00: configured for UDMA/133
 34.
     Dec 16 22:44:29 localhost kernel: ata9: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 35.
     Dec 16 22:44:29 localhost kernel: ata9.00: ATA-7: SAMSUNG SP2504C,
     VT100-33, max UDMA7
 36.
     Dec 16 22:44:29 localhost kernel: ata9.00: 488397168 sectors,
     multi 0: LBA48 NCQ (depth 0/32)
 37.
     Dec 16 22:44:29 localhost kernel: ata9.00: configured for UDMA/133
 38.
     Dec 16 22:44:29 localhost kernel: ata10: SATA link down (SStatus 0
     SControl 300)
 39.
     Dec 16 22:44:29 localhost kernel: ata11: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 40.
     Dec 16 22:44:29 localhost kernel: ata11.00: ATA-7: SAMSUNG
     SP2504C, VT100-33, max UDMA7
 41.
     Dec 16 22:44:29 localhost kernel: ata11.00: 488397168 sectors,
     multi 0: LBA48 NCQ (depth 0/32)
 42.
     Dec 16 22:44:29 localhost kernel: ata11.00: configured for UDMA/133
 43.
     Dec 16 22:44:29 localhost kernel: ata12: SATA link down (SStatus 0
     SControl 300)
 44.

Dec 16 22:44:29 localhost kernel: scsi 4:0:0:0: Direct-AccessATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5

 45.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
     512-byte hardware sectors (250059 MB)
 46.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
     is off
 47.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
     3a 00 00
 48.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
     enabled, read cache: enabled, doesn't support DPO or FUA
 49.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] 488397168
     512-byte hardware sectors (250059 MB)
 50.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write Protect
     is off
 51.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Mode Sense: 00
     3a 00 00
 52.
     Dec 16 22:44:29 localhost kernel: sd 4:0:0:0: [sdb] Write cache:
     enabled, read cache: enabled, doesn't support DPO or FUA
 53.
     Dec 16 22:44:29 localhost kernel:  sdb:<3>ata5.00: exception Emask
     0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
 54.
     Dec 16 22:44:29 localhost kernel: ata5.00: cmd
     c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
 55.
     Dec 16 22:44:29 localhost kernel:          res
     40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
 56.
     Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
 57.
     Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 58.
     Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
 59.
     Dec 16 22:44:29 localhost kernel: ata5: EH complete
 60.
     Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
     SAct 0x0 SErr 0x0 action 0x2 frozen
 61.
     Dec 16 22:44:29 localhost kernel: ata5.00: cmd
     c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
 62.
     Dec 16 22:44:29 localhost kernel:          res
     40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
 63.
     Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
 64.
     Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 65.
     Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
 66.
     Dec 16 22:44:29 localhost kernel: ata5: EH complete
 67.
     Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
     SAct 0x0 SErr 0x0 action 0x2 frozen
 68.
     Dec 16 22:44:29 localhost kernel: ata5.00: cmd
     c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
 69.
     Dec 16 22:44:29 localhost kernel:          res
     40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
 70.
     Dec 16 22:44:29 localhost kernel: ata5: soft resetting port
 71.
     Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 72.
     Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
 73.
     Dec 16 22:44:29 localhost kernel: ata5: EH complete
 74.
     Dec 16 22:44:29 localhost kernel: ata5: limiting SATA link speed
     to 1.5 Gbps
 75.
     Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
     SAct 0x0 SErr 0x0 action 0x6 frozen
 76.
     Dec 16 22:44:29 localhost kernel: ata5.00: cmd
     c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
 77.
     Dec 16 22:44:29 localhost kernel:          res
     40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
 78.
     Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
 79.
     Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 80.
     Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133
 81.
     Dec 16 22:44:29 localhost kernel: ata5: EH complete
 82.
     Dec 16 22:44:29 localhost kernel: ata5.00: exception Emask 0x0
     SAct 0x0 SErr 0x0 action 0x2 frozen
 83.
     Dec 16 22:44:29 localhost kernel: ata5.00: cmd
     c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
 84.
     Dec 16 22:44:29 localhost kernel:          res
     40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
 85.
     Dec 16 22:44:29 localhost kernel: ata5: hard resetting port
 86.
     Dec 16 22:44:29 localhost kernel: ata5: SATA link up 3.0 Gbps
     (SStatus 123 SControl 300)
 87.
     Dec 16 22:44:29 localhost kernel: ata5.00: configured for UDMA/133


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Prev by Date: Re: sockets affected by IPsec always block (2.6.23)
Next by Date: Re: [PATCH] x86_64: fix problems due to use of "outb" to port 80 on some AMD64x2 laptops, etc.
Previous by thread: howto get a melodic system beep?
Next by thread: sata_mv not working with a RocketRaid 2220
Index(es):
- Date
- Thread

[Index of Archives] [Kernel Newbies] [Netfilter] [Bugtraq] [Photo] [Stuff] [Gimp] [Yosemite News] [MIPS Linux] [ARM Linux] [Linux Security] [Linux RAID] [Video 4 Linux] [Linux for the blind] [Linux Resources]