On 14-12-07 15:46, Ingo Molnar wrote:
* Rene Herman <[email protected]> wrote:
/*
- * This should be approx 2 Bo*oMips to start (note initial shift), and will
- * still work even if initially too large, it will just take slightly longer
+ * Initial value roughly corresponds to a 1 GHz CPU
*/
-unsigned long loops_per_jiffy = (1<<12);
+unsigned long loops_per_jiffy = 1000000000 / HZ;
EXPORT_SYMBOL(loops_per_jiffy);
this is a factor of ~2400 increase - this will take an eternity to boot on
any older CPU.
Only any outb_p's used before loops_per_jiffy is calibrated are
affected.
yes - but there are a couple of early udelays, which would thus be
affected.
True. At the moment though they're just always not delaying anywhere close
the intended amount (on anything with more than 2 bogomips). Pre-calibration
all this stuff is just broken it seems.
This pre-calibation thing is what's historically held this change back
(it's been discussed dozens of times before). At 4096, not any machine
is going to have an appreciable delay before calibration when
switching from the outb to 0x80.
i dont think this should matter: old systems that truly _need_ the ISA
delay will be slow enough to not trip up. (nor are they really affected
by these early delays - the delays were more for crappy ISA devices that
get initialized later down, when the delay loop is already calibrated)
8253 (DMAC) and 8254 (PIT) have been reported in earlier versions of the
thread. By Alan, I believe.
Rene.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
