-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have tolerated this problem for a year and do not post to this list in
haste. I have posted on forums and searched the community over the past
year. I have looked at the list archive on gossamer-threads.com for
solutions. With Fedora Core 6 unsupported (the last kernel for which my
zip drive worked), it is time for my last attempt at a solution. Please
CC: any response as I have not joined the list. I have compiled a
kernel-debug RPM and can run this if its output would help. Thank you
for any time you might devote to this problem.
motherboard: MSI P965 Platinum/Intel P965 Express Chipset Based (MS-7238
series)
Fedora 8 : kernel 2.6.23.1-42.fc8
Iomega Zip drive internal Model Z100ATAPI
lspci
03:00.0 SATA controller: JMicron Technologies, Inc. JMB361 AHCI/IDE (rev 02)
03:00.1 IDE interface: JMicron Technologies, Inc. JMB361 AHCI/IDE (rev 02)
# lsmod | grep ata
pata_jmicron 8257 0
ata_generic 8901 0
ata_piix 16709 0
libata 99633 4 ahci,pata_jmicron,ata_generic,ata_piix
scsi_mod 119757 4 sr_mod,sg,libata,sd_mod
I have recently changed the BIOS setting for the SATA#1 Controller from
[IDE] to [AHCI] with no effect. I assume AHCI is correct?
Text below attached as text.txt for readability.
from dmesg:
libata version 2.21 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 17
ata2: PATA max UDMA/100 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 17
ata1.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0B, max UDMA/66
ata1.01: ATAPI: IOMEGA ZIP 100 ATAPI, 05.H, max MWDMA1, CDB intr
ata1.00: configured for UDMA/66
ata1.01: configured for MWDMA1
scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1693S KS0B PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access IOMEGA ZIP 100 05.H PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
If a disk is inserted into the drive (/var/log/messages)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Spinning up disk.....<5>sd 0:0:1:0: [sda] Spinning up disk....ready
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel: sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
Dec 10 14:22:53 localhost kernel: end_request: I/O error, dev sda, sector 0
Dec 10 14:22:53 localhost kernel: printk: 42 messages suppressed.
Dec 10 14:22:53 localhost kernel: Buffer I/O error on device sda, logical block 0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFHXZ0Hz1/aqdDsM3URAs0UAJ0TUthyDtWaoSIHrbaIc43v/6yj+ACgkMyx
fC3xUrTkYyojPOV7YBSqLSY=
=0eW3
-----END PGP SIGNATURE-----
from dmesg:
libata version 2.21 loaded.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c400 irq 17
ata2: PATA max UDMA/100 cmd 0x0001c800 ctl 0x0001c482 bmdma 0x0001c408 irq 17
ata1.00: ATAPI: LITE-ON DVDRW SOHW-1693S, KS0B, max UDMA/66
ata1.01: ATAPI: IOMEGA ZIP 100 ATAPI, 05.H, max MWDMA1, CDB intr
ata1.00: configured for UDMA/66
ata1.01: configured for MWDMA1
scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1693S KS0B PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access IOMEGA ZIP 100 05.H PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 40 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
If a disk is inserted into the drive (/var/log/messages)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Spinning up disk.....<5>sd 0:0:1:0: [sda] Spinning up disk....ready
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] 196608 512-byte hardware sectors (101 MB)
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write Protect is off
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 10 14:22:53 localhost kernel: sda:<6>sd 0:0:1:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Sense Key : Hardware Error [current]
Dec 10 14:22:53 localhost kernel: sd 0:0:1:0: [sda] Add. Sense: Scsi parity error
Dec 10 14:22:53 localhost kernel: end_request: I/O error, dev sda, sector 0
Dec 10 14:22:53 localhost kernel: printk: 42 messages suppressed.
Dec 10 14:22:53 localhost kernel: Buffer I/O error on device sda, logical block 0
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
