* Ananth N Mavinakayanahalli ([email protected]) wrote:
> On Mon, Dec 10, 2007 at 11:13:07AM +0100, Sam Ravnborg wrote:
> > On Mon, Dec 10, 2007 at 03:22:22PM +0530, Ananth N Mavinakayanahalli wrote:
> > > From: Ananth N Mavinakayanahalli <[email protected]>
> > >
> > > This patch adds CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file
> > > for relevant architectures with kprobes support. This facilitates easy
> > > handling of in-kernel modules (like samples/kprobes/kretprobe_example.c)
> > > that depend on kretprobes being present in the kernel.
> > >
> > > This patch depends on Mathieu Desnoyers' "Instrumentation menu removal"
> > > patchset (http://marc.info/?l=linux-kernel&m=119496432229633&w=2)
> > >
> > > Updated to apply on 2.6.24-rc4-mm1.
> > >
> > > Signed-off-by: Ananth N Mavinakayanahalli <[email protected]>
> > > ---
> > > arch/avr32/Kconfig | 5 +++++
> > > arch/ia64/Kconfig | 5 +++++
> > > arch/powerpc/Kconfig | 5 +++++
> > > arch/s390/Kconfig | 5 +++++
> > > arch/sparc64/Kconfig | 5 +++++
> > > arch/x86/Kconfig | 5 +++++
> > > include/asm-ia64/kprobes.h | 1 -
> > > include/asm-powerpc/kprobes.h | 1 -
> > > include/asm-s390/kprobes.h | 1 -
> > > include/asm-x86/kprobes_32.h | 1 -
> > > include/asm-x86/kprobes_64.h | 1 -
> > > include/linux/kprobes.h | 6 +++---
> > > kernel/kprobes.c | 8 +++-----
> > > 13 files changed, 36 insertions(+), 13 deletions(-)
> > >
> > > Index: linux-2.6.24-rc4/arch/avr32/Kconfig
> > > ===================================================================
> > > --- linux-2.6.24-rc4.orig/arch/avr32/Kconfig
> > > +++ linux-2.6.24-rc4/arch/avr32/Kconfig
> > > @@ -66,6 +66,11 @@ config GENERIC_BUG
> > > def_bool y
> > > depends on BUG
> > >
> > > +config HAVE_KRETPROBES
> > > + bool
> > > + depends on HAVE_KPROBES
> > > + default n
> > > +
> >
> > The symbol HAVE_KRETPROBES should be defined in the common file - so
> > the only thing you have to do is a single line:
> > config AVR32
> > + select HAVE_KRETPROBES
> >
> >
> > Much more dense than defining the symbols once for each arch.
>
> Agreed. Updated patch below.
>
> From: Ananth N Mavinakayanahalli <[email protected]>
>
> This patch adds CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file
> for relevant architectures with kprobes support. This facilitates easy
> handling of in-kernel modules (like samples/kprobes/kretprobe_example.c)
> that depend on kretprobes being present in the kernel.
>
> This patch depends on Mathieu Desnoyers' "Instrumentation menu removal"
> patchset (http://marc.info/?l=linux-kernel&m=119496432229633&w=2)
>
> Updated to apply on 2.6.24-rc4-mm1. Thanks to Sam Ravnborg for helping
> make the patch more lean.
>
> Signed-off-by: Ananth N Mavinakayanahalli <[email protected]>
> ---
> arch/Kconfig | 4 ++++
> arch/ia64/Kconfig | 1 +
> arch/powerpc/Kconfig | 1 +
> arch/s390/Kconfig | 1 +
> arch/x86/Kconfig | 1 +
> include/asm-ia64/kprobes.h | 1 -
> include/asm-powerpc/kprobes.h | 1 -
> include/asm-x86/kprobes_32.h | 1 -
> include/asm-x86/kprobes_64.h | 1 -
> include/linux/kprobes.h | 6 +++---
> kernel/kprobes.c | 8 +++-----
> 11 files changed, 14 insertions(+), 12 deletions(-)
>
> Index: linux-2.6.24-rc4/arch/Kconfig
> ===================================================================
> --- linux-2.6.24-rc4.orig/arch/Kconfig
> +++ linux-2.6.24-rc4/arch/Kconfig
> @@ -29,3 +29,7 @@ config KPROBES
>
> config HAVE_KPROBES
> def_bool n
> +
> +config HAVE_KRETPROBES
> + def_bool n
> + depends on HAVE_KPROBES
> Index: linux-2.6.24-rc4/arch/ia64/Kconfig
> ===================================================================
> --- linux-2.6.24-rc4.orig/arch/ia64/Kconfig
> +++ linux-2.6.24-rc4/arch/ia64/Kconfig
> @@ -17,6 +17,7 @@ config IA64
> select ARCH_SUPPORTS_MSI
> select HAVE_OPROFILE
> select HAVE_KPROBES
> + select HAVE_KRETPROBES
> default y
> help
> The Itanium Processor Family is Intel's 64-bit successor to
> Index: linux-2.6.24-rc4/arch/powerpc/Kconfig
> ===================================================================
> --- linux-2.6.24-rc4.orig/arch/powerpc/Kconfig
> +++ linux-2.6.24-rc4/arch/powerpc/Kconfig
> @@ -81,6 +81,7 @@ config PPC
> default y
> select HAVE_OPROFILE
> select HAVE_KPROBES
> + select HAVE_KRETPROBES
>
> config EARLY_PRINTK
> bool
> Index: linux-2.6.24-rc4/arch/s390/Kconfig
> ===================================================================
> --- linux-2.6.24-rc4.orig/arch/s390/Kconfig
> +++ linux-2.6.24-rc4/arch/s390/Kconfig
> @@ -53,6 +53,7 @@ config S390
> def_bool y
> select HAVE_OPROFILE
> select HAVE_KPROBES
> + select HAVE_KRETPROBES
>
> source "init/Kconfig"
>
> Index: linux-2.6.24-rc4/arch/x86/Kconfig
> ===================================================================
> --- linux-2.6.24-rc4.orig/arch/x86/Kconfig
> +++ linux-2.6.24-rc4/arch/x86/Kconfig
> @@ -20,6 +20,7 @@ config X86
> def_bool y
> select HAVE_OPROFILE
> select HAVE_KPROBES
> + select HAVE_KRETPROBES
>
> config GENERIC_TIME
> def_bool y
> Index: linux-2.6.24-rc4/include/asm-ia64/kprobes.h
> ===================================================================
> --- linux-2.6.24-rc4.orig/include/asm-ia64/kprobes.h
> +++ linux-2.6.24-rc4/include/asm-ia64/kprobes.h
> @@ -82,7 +82,6 @@ struct kprobe_ctlblk {
> struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
> };
>
> -#define ARCH_SUPPORTS_KRETPROBES
> #define kretprobe_blacklist_size 0
>
> #define SLOT0_OPCODE_SHIFT (37)
> Index: linux-2.6.24-rc4/include/asm-powerpc/kprobes.h
> ===================================================================
> --- linux-2.6.24-rc4.orig/include/asm-powerpc/kprobes.h
> +++ linux-2.6.24-rc4/include/asm-powerpc/kprobes.h
> @@ -80,7 +80,6 @@ typedef unsigned int kprobe_opcode_t;
> #define is_trap(instr) (IS_TW(instr) || IS_TWI(instr))
> #endif
>
> -#define ARCH_SUPPORTS_KRETPROBES
> #define flush_insn_slot(p) do { } while (0)
> #define kretprobe_blacklist_size 0
>
> Index: linux-2.6.24-rc4/include/asm-x86/kprobes_32.h
> ===================================================================
> --- linux-2.6.24-rc4.orig/include/asm-x86/kprobes_32.h
> +++ linux-2.6.24-rc4/include/asm-x86/kprobes_32.h
> @@ -42,7 +42,6 @@ typedef u8 kprobe_opcode_t;
> ? (MAX_STACK_SIZE) \
> : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
>
> -#define ARCH_SUPPORTS_KRETPROBES
> #define flush_insn_slot(p) do { } while (0)
>
> extern const int kretprobe_blacklist_size;
> Index: linux-2.6.24-rc4/include/asm-x86/kprobes_64.h
> ===================================================================
> --- linux-2.6.24-rc4.orig/include/asm-x86/kprobes_64.h
> +++ linux-2.6.24-rc4/include/asm-x86/kprobes_64.h
> @@ -41,7 +41,6 @@ typedef u8 kprobe_opcode_t;
> ? (MAX_STACK_SIZE) \
> : (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
>
> -#define ARCH_SUPPORTS_KRETPROBES
> extern const int kretprobe_blacklist_size;
>
> void kretprobe_trampoline(void);
> Index: linux-2.6.24-rc4/include/linux/kprobes.h
> ===================================================================
> --- linux-2.6.24-rc4.orig/include/linux/kprobes.h
> +++ linux-2.6.24-rc4/include/linux/kprobes.h
> @@ -125,11 +125,11 @@ struct jprobe {
> DECLARE_PER_CPU(struct kprobe *, current_kprobe);
> DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
>
> -#ifdef ARCH_SUPPORTS_KRETPROBES
> +#ifdef CONFIG_HAVE_KRETPROBES
Hi Ananth,
I just want to point out a detail: if someone sets CONFIG_KPROBES to n,
the CONFIG_HAVE_KPROBES is still y, and so is CONFIG_HAVE_KRETPROBES.
However, I doubt that you want to activate this code in this case ?
The code paths are OK because they are nested into CONFIG_KPROBES
ifdefs (or not built due to dependency on CONFIG_KPROBES in the
Makfile), but if one wants to use CONFIG_HAVE_KRETPROBE for something
else (Makefile), then it could become a problem.
Could we add a menu entry CONFIG_KRETPROBES that depends on
CONFIG_HAVE_KRETPROBES and CONFIG_KPROBES, and also remove the
CONFIG_HAVE_KPROBES dependency for the CONFIG_HAVE_KRETPROBE option ?
This way, we would have much more flexibility (like specifiying if we
want CONFIG_KRETPROBES to be default y or default n...)
Mathieu
> extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
> struct pt_regs *regs);
> extern int arch_trampoline_kprobe(struct kprobe *p);
> -#else /* ARCH_SUPPORTS_KRETPROBES */
> +#else /* CONFIG_HAVE_KRETPROBES */
> static inline void arch_prepare_kretprobe(struct kretprobe *rp,
> struct pt_regs *regs)
> {
> @@ -138,7 +138,7 @@ static inline int arch_trampoline_kprobe
> {
> return 0;
> }
> -#endif /* ARCH_SUPPORTS_KRETPROBES */
> +#endif /* CONFIG_HAVE_KRETPROBES */
> /*
> * Function-return probe -
> * Note:
> Index: linux-2.6.24-rc4/kernel/kprobes.c
> ===================================================================
> --- linux-2.6.24-rc4.orig/kernel/kprobes.c
> +++ linux-2.6.24-rc4/kernel/kprobes.c
> @@ -678,8 +678,7 @@ void __kprobes unregister_jprobe(struct
> unregister_kprobe(&jp->kp);
> }
>
> -#ifdef ARCH_SUPPORTS_KRETPROBES
> -
> +#ifdef CONFIG_HAVE_KRETPROBES
> /*
> * This kprobe pre_handler is registered with every kretprobe. When probe
> * hits it will set up the return probe.
> @@ -762,7 +761,7 @@ int __kprobes register_kretprobe(struct
> return ret;
> }
>
> -#else /* ARCH_SUPPORTS_KRETPROBES */
> +#else /* CONFIG_HAVE_KRETPROBES */
>
> int __kprobes register_kretprobe(struct kretprobe *rp)
> {
> @@ -774,8 +773,7 @@ static int __kprobes pre_handler_kretpro
> {
> return 0;
> }
> -
> -#endif /* ARCH_SUPPORTS_KRETPROBES */
> +#endif /* CONFIG_HAVE_KRETPROBES */
>
> void __kprobes unregister_kretprobe(struct kretprobe *rp)
> {
--
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
