Re: Failure with SATA DVD-RW

[Andrew Morton <akpm@linux-foundation.org>]

On Thu, 6 Dec 2007 01:33:16 +0000 (UTC)
Parag Warudkar <parag.warudkar@gmail.com> wrote:

> Tom Lanyon <tomlanyon <at> gmail.com> writes:
> 
> > scsi4: ahci
> > ata5: SATA link up at 1.5 Gbps (SStatus 113 SControl 300)
> > ata5.00: ATAPI, max UDMA/66
> > ata5.00: qc timeout (cmd 0xef)
> > ata5.00: failed to set xfermode (err_mask=0x104)
> > ata5.00: limiting speed to UDMA/44
> > ata5: failed to recover some devices, retrying in 5 secs
> > ata5: port is slow to respond, please be patient (Status 0x80)
> > ata5: port failed to respond (30 secs, status 0x80)
> > ata5: COMRESET failed (device not ready)
> > ata5: hardreset failed, retrying in 5 secs
> > ata5: SATA link up at 1.5 Gbps (SStatus 113 SControl 300)
> > ata5.00: ATAPI, max UDMA/66
> > ata5.00: qc timeout (cmd 0xef)
> > ata5.00: failed to set xfermode (err_mask=0x104)
> > ata5.00: limiting speed to PIO0
> > ata5: failed to recover some devices, retrying in 5 secs
> > ata5: port is slow to respond, please be patient (Status 0x80)
> > ata5: port failed to respond (30 secs, status 0x80)
> > ata5: COMRESET failed (device not ready)
> > ata5: hardreset failed, retrying in 5 secs
> > ata5.00: ATAPI, max UDMA/66
> > ata5.00: qc timeout (cmd 0xef)
> > ata5.00: failed to set xfermode (err_mask=0x104)
> > ata5.00: disabled
> > 
> Looks like it is trying to set transfer mode to UDMA/66 and failing. After 
> that it tried UDMA/44 and failed again. Next UDMA/66 again with unsurprising 
> result - failed. After that PIO0 which seems to cause some kind of trouble, 
> then it tries UDMA/66 again, and I am not stating the result again :) ! 
> 
> > Any ideas what to try to get it working under AHCI?
> > 
> 
> I recall reading somewhere - the Pioneer drive needs UDMA/33 which it did not 
> try in your case - need to some how have it try UDMA/33 but I don't find a 
> boot parameter which will do that. So may be adding a quirk for this device to 
> limit the xfer mode to 33 may work. 
> 
> What does your dmesg output for the drives look like when you run in IDE 
> compat mode? (Particularly the DMA for this drive?)
> 

Please cc linux-ide on sata, pata and ide-related issues.

If nothing happens within a few days please raise a report at
bugzilla.kernel.org so we can ignore this in an organised fashion, thanks.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/