Re: 2.6.24-rc4-mm1: hostbyte=0x01 driverbyte=0x00 (now bisected)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 06, 2007 at 08:52:29AM +0100, Hannes Reinecke wrote:
> Alexey Dobriyan wrote:
> >>  git-scsi-misc.patch
> > 
> > Apologies for not looking into the problem earlier. See
> > http://marc.info/?t=119628022300005&r=1&w=2
> > "2.6.24-rc3-mm2: Result: hostbyte=0x01 driverbyte=0x00\nend_request: I/O error"
> > for previous installment.
> > 
> > I've bisected it to the following patch in git-scsi-misc branch.
> > Revert on top of 2.6.24-rc4-mm1 also helps.
> > 
> > commit 8655a546c83fc43f0a73416bbd126d02de7ad6c0
> > Author: Hannes Reinecke <[email protected]>
> > Date:   Tue Nov 6 09:23:40 2007 +0100
> > 
> >     [SCSI] Do not requeue requests if REQ_FAILFAST is set
> >     
> >     Any requests with the REQ_FAILFAST flag set should not be requeued
> >     to the requeust queue, but rather terminated directly.
> >     Otherwise the multipath failover will stall until the command
> >     timeout triggers.
> >     
> >     Signed-off-by: Hannes Reinecke <[email protected]>
> >     Signed-off-by: James Bottomley <[email protected]>
> > 
> > diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> > index 0f44bdb..0da0dd0 100644
> > --- a/drivers/scsi/scsi_lib.c
> > +++ b/drivers/scsi/scsi_lib.c
> > @@ -1286,6 +1286,11 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
> >  			 */
> >  			if (!(req->cmd_flags & REQ_PREEMPT))
> >  				ret = BLKPREP_DEFER;
> > +			/*
> > +			 * Return failfast requests immediately
> > +			 */
> > +			if (req->cmd_flags & REQ_FAILFAST)
> > +				ret = BLKPREP_KILL;
> >  			break;
> >  		default:
> >  			/*
> > @@ -1414,6 +1419,17 @@ static inline int scsi_host_queue_ready(struct request_queue *q,
> >  	return 1;
> >  }
> >  
> > +static void __scsi_kill_request(struct request *req)
> > +{
> > +	struct scsi_cmnd *cmd = req->special;
> > +	struct scsi_device *sdev = cmd->device;
> > +
> > +	cmd->result = DID_NO_CONNECT << 16;
> > +	atomic_inc(&cmd->device->iorequest_cnt);
> > +	sdev->device_busy--;
> > +	__scsi_done(cmd);
> > +}
> > +
> >  /*
> >   * Kill a request for a dead device
> >   */
> > @@ -1527,8 +1543,16 @@ static void scsi_request_fn(struct request_queue *q)
> >  		 * accept it.
> >  		 */
> >  		req = elv_next_request(q);
> > -		if (!req || !scsi_dev_queue_ready(q, sdev))
> > +		if (!req)
> > +			break;
> > +
> > +		if (!scsi_dev_queue_ready(q, sdev)) {
> > +			if (req->cmd_flags & REQ_FAILFAST) {
> > +				scsi_kill_request(req, q);
> > +				continue;
> > +			}
> >  			break;
> > +		}
> >  
> >  		if (unlikely(!scsi_device_online(sdev))) {
> >  			sdev_printk(KERN_ERR, sdev,
> > @@ -1609,8 +1633,12 @@ static void scsi_request_fn(struct request_queue *q)
> >  	 * later time.
> >  	 */
> >  	spin_lock_irq(q->queue_lock);
> > -	blk_requeue_request(q, req);
> > -	sdev->device_busy--;
> > +	if (unlikely(req->cmd_flags & REQ_FAILFAST))
> > +		__scsi_kill_request(req);
> > +	else {
> > +		blk_requeue_request(q, req);
> > +		sdev->device_busy--;
> > +	}
> >  	if(sdev->device_busy == 0)
> >  		blk_plug_device(q);
> >   out:
> Yeah, sorry. That patch was bad. Please use the attached one instead.
> Andrew, can you replace them?

Instead? It won't apply. And it doesn't help on top of git-scsi.
It helps if 3 hunks involving __scsi_kill_request() are ducked.

> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -1284,13 +1284,15 @@ int scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
>  			/*
>  			 * If the devices is blocked we defer normal commands.
>  			 */
> -			if (!(req->cmd_flags & REQ_PREEMPT))
> -				ret = BLKPREP_DEFER;
> -			/*
> -			 * Return failfast requests immediately
> -			 */
> -			if (req->cmd_flags & REQ_FAILFAST)
> -				ret = BLKPREP_KILL;
> +			if (!(req->cmd_flags & REQ_PREEMPT)) {
> +				/*
> +				 * Return failfast requests immediately
> +				 */
> +				if (req->cmd_flags & REQ_FAILFAST)
> +					ret = BLKPREP_KILL;
> +				else
> +					ret = BLKPREP_DEFER;
> +			}
>  			break;
>  		default:
>  			/*

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux