Hello,
Here is the last version of the patch updated regarding your remarks.
Regards,
Julien Krauth
Changes:
========
- Indentation.
- Code optimisation: all boards except the APCI-7800 are now managed
with the pci_default_setup() function.
- Add pbn_b0_8_115200 to manage the APCI-7800-3 with the
pci_default_setup() function.
---
From: Krauth Julien <[email protected]>
Add ADDI-DATA GmbH communication cards to 8250_pci driver.
Supported cards are:
APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2,
APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3
8250_pci.c.patch
================
Add ADDI-DATA GmbH communication cards to 8250_pci.c.
pci_ids.h.patch
===============
Add ADDI-DATA GmbH communication cards Vendor and Device IDs to
pci_ids.h.
WARNING:
========
8250_pci.c.patch depend on pci_ids.h.patch.
8250_pci.c is using Vendor and Device ID defined in pci_ids.h.
Signed-off-by: Krauth J. <[email protected]>
---
This patch applies to kernel 2.6.23.9.
--- linux-2.6.23.9-vanilla/include/linux/pci_ids.h 2007-11-26
18:51:43.000000000 +0100
+++ linux-2.6.23.9/include/linux/pci_ids.h 2007-11-27
10:55:12.000000000 +0100
@@ -2019,6 +2019,23 @@
#define PCI_VENDOR_ID_QUICKNET 0x15e2
#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
+/*
+ * ADDI-DATA GmbH communication cards <[email protected]> */
+#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8
+#define PCI_VENDOR_ID_ADDIDATA 0x15B8
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300 0x7002
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800 0x818E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2 0x7009
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2 0x700A
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2 0x700B
+#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3 0x700C
+#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D
+#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E
+#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F
+
#define PCI_VENDOR_ID_PDC 0x15e9
#define PCI_VENDOR_ID_FARSITE 0x1619
--- linux-2.6.23.9-vanilla/drivers/serial/8250_pci.c 2007-11-26
18:51:43.000000000 +0100
+++ linux-2.6.23.9/drivers/serial/8250_pci.c 2007-11-30
08:33:50.000000000 +0100
@@ -106,6 +106,32 @@ setup_port(struct serial_private *priv,
}
/*
+ * ADDI-DATA GmbH communication cards <[email protected]>
+ */
+static int
+addidata_apci7800_setup(struct serial_private *priv, struct
pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+ bar = FL_GET_BASE(board->flags);
+
+ if (idx < 2 ) {
+ offset += idx * board->uart_offset;
+ } else if ((idx >= 2) && (idx < 4)) {
+ bar += 1;
+ offset += ((idx - 2) * board->uart_offset);
+ } else if ((idx >= 4) && (idx < 6 )) {
+ bar += 2;
+ offset += ((idx - 4) * board->uart_offset);
+ } else if (idx >= 6) {
+ bar += 3;
+ offset += ((idx - 6) * board->uart_offset);
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
* AFAVLAB uses a different mixture of BARs and offsets
* Not that ugly ;) -- HW
*/
@@ -752,6 +778,16 @@ pci_default_setup(struct serial_private
*/
static struct pci_serial_quirk pci_serial_quirks[] = {
/*
+ * ADDI-DATA GmbH communication cards <[email protected]>
+ */
+ {
+ .vendor = PCI_VENDOR_ID_ADDIDATA_OLD,
+ .device = PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = addidata_apci7800_setup,
+ },
+ /*
* AFAVLAB cards - these may be called via parport_serial
* It is not clear whether this applies to all products.
*/
@@ -1036,6 +1072,7 @@ enum pci_board_num_t {
pbn_b0_2_115200,
pbn_b0_4_115200,
pbn_b0_5_115200,
+ pbn_b0_8_115200,
pbn_b0_1_921600,
pbn_b0_2_921600,
@@ -1172,6 +1209,12 @@ static struct pciserial_board pci_boards
.base_baud = 115200,
.uart_offset = 8,
},
+ [pbn_b0_8_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[pbn_b0_1_921600] = {
.flags = FL_BASE0,
@@ -2574,6 +2617,97 @@ static struct pci_device_id serial_pci_t
pbn_pasemi_1682M },
/*
+ * ADDI-DATA GmbH communication cards <[email protected]>
+ */
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA_OLD,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b1_8_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_2,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7500_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_4_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7420_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_2_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7300_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_1_115200 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCI7800_3,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_b0_8_115200 },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
ADDI-DATA GmbH - Dieselstraße 3 - 77833 Ottersweier (Germany)
Amtsgericht Mannheim HRB210433
Geschäftsführer Antonio Agnetti, René Ohlmann
UST-ID-Nr.: DE 143754253 WEEE-Reg.-Nr. DE 65862200
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager.
This footnote confirms that this email message has been scanned for the presence of computer viruses.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
