On Wed, 5 Dec 2007 11:14:41 +0100
Anders Henke <[email protected]> wrote:
> On Tue, 4 Dec 2007 Andrew Morton wrote:
> > On Wed, 05 Dec 2007 10:30:54 +0900 FUJITA Tomonori <[email protected]> wrote:
> >
> > > On Tue, 4 Dec 2007 17:11:55 -0800
> > > Andrew Morton <[email protected]> wrote:
> > >
> > > > On Wed, 05 Dec 2007 10:04:03 +0900
> > > > FUJITA Tomonori <[email protected]> wrote:
> > > >
> > > > > On Tue, 4 Dec 2007 16:57:38 -0800
> > > > > Andrew Morton <[email protected]> wrote:
> > > > >
> > > > > > On Thu, 29 Nov 2007 13:31:50 +0100
> > > > > > Anders Henke <[email protected]> wrote:
> > > > > >
> > > > > > > On November 28 2007, Anders Henke wrote:
> > > > > > > > As "everything is reported as being zero" is quite odd an Jan took a
> > > > > > > > guess that it might be block-layer or driver-related, I've assumed
> > > > > > > > that the driver is responsible for this; just out of the curiousity,
> > > > > > > > I've manually replaced the dpt_i2o driver by the 2.6.19 one by copying
> > > > > > > > driver/scsi/dpt_i2o.c driver/scsi/dpti.h and driver/scsi/dpt/ into a
> > > > > > > > vanilla 2.6.23.1. kernel; using this kernel fixed the issue for me.
> > > > > > > >
> > > > > > > > I haven't yet fine-tested from which kernel release on the dpt_i2o driver
> > > > > > > > behaves like this and spews out zeroed blocks when trying to mount
> > > > > > > > the rootfs. Maybe this is just some timing issue.
> > > > > > >
> > > > > > > I've started the fine-tests and can say so far that dpt_i2o from
> > > > > > > 2.6.22 is still fine. Test is simple:
> > > > > > >
> > > > > > > anders@ista:/usr/src/linux-2.6.22/drivers/scsi/dpt$ cp -r dpt/ dpt_i2o.c dpti.h /usr/src/linux-2.6.23.1/drivers/scsi/
> > > > > > >
> > > > > > > ... recompile the kernel, reboot: works.
> > > > > > >
> > > > > > > 2.6.22 and 2.6.23 differ in terms of the dpt_i2o driver by two different
> > > > > > > patch sets:
> > > > > > > -one 2 Kb small set of patches from 2.6.22 to 2.6.22-rc1
> > > > > > > -one 7 Kb set of patches from 2.6.23-rc2 to 2.6.23-rc3
> > > > > > > -one 162 Kb set of patches from 2.6.23-rc9 to 2.6.23-rc10.
> > > > > > >
> > > > > > > When applying the 2.6.23-rc1-based driver to "my" 2.6.31.1 kernel,
> > > > > > > the "zero blocks"-symptom show up, so it's the "lucky" situation
> > > > > > > that the smallest patch actually seams to be the broken one.
> > > > > > >
> > > > > > > According to the 2.6.23-rc1 short-form changelog, there is
> > > > > > > one major edit on the dpt_i2o driver:
> > > > > > >
> > > > > > > FUJITA Tomonori
> > > > > > >
> > > > > > > [SCSI] dpt_i2o: convert to use the data buffer accessors
> > > > > > >
> > > > > > > Stephen Rothwell
> > > > > > > dpt_i2o depends on virt_to_bus
> > > > > > >
> > > > > > > Fujita, would you please take a look at this?
> > > > > >
> > > > > > He won't have seen this. cc's added.
> > > > > >
> > > > > > > I think that something's broken in there, leading to the dpt_i2o
> > > > > > > sending out blocks of zeroes right after initialization, at least on
> > > > > > > some specific controllers (in this case, Adaptec 2010S on Intel
> > > > > > > SE7501WV2S-based boxes).
> > > > > > >
> > > > > > > I don't have insight kernel driver development knowledge, so I'm
> > > > > > > quite out of help right now. Nevertheless, I'll add the diff
> > > > > > > from 2.6.22 to 2.6.23-rc1 in terms of dpt_i2o:
> > > > > > >
> > > > > >
> > > > > > Can you please confirm that this revert (against 2.6.24-rc4) fixes the data
> > > > > > corruption problems?
> > > > >
> > > > > Anders said that my patch is fine and seems that Matthew's hotplug
> > > > > conversion patch leads to the problem:
> > > > >
> > > > > http://marc.info/?l=linux-kernel&m=119641892129732&w=2
> > > >
> > > > Oh. Jan broke message threading :(
> > > >
> > > > So it's been nearly a week and nothing has happened? Do we revert that
> > > > change?
> > >
> > > SCSI people really want this conversion...
> > >
> > > Matthew, did you have a chance to look at it?
> >
> > It seems pretty improbably that a change of that nature could cause data
> > corruption. Anders, are you able to determine whether the revert (against
> > current Linus mainline or 2.6.24-rc4) fixes things? Because it would be
> > very strange...
> >
> > This is a grave bug. It's really quite urgent...
> >
> > Thanks.
> >
> > drivers/scsi/dpt_i2o.c | 132 ++++++++++++++++++---------------------
> > drivers/scsi/dpti.h | 9 ++
> > 2 files changed, 68 insertions(+), 73 deletions(-)
>
> I've done the following:
>
> -untared a clean 2.6.24-rc4 and compiled it with my 2.6.23.1-settings in order
> to verify that the driver is still broken: checked, the box still won't
> boot.
>
> -patched the just compiled kernel source with your patch, "make dist-clean"
> (by means of "make-kpkg clean") and recompile: box boots fine.
>
> I've put the captured console logs to
> http://w.sysiphus.de/dpt_i2o/bootlog.2624-rc4-pristine
> http://w.sysiphus.de/dpt_i2o/bootlog.2624-rc4-patched
> ... and the kernelconfig (which shouldn't matter) to
> http://w.sysiphus.de/dpt_i2o/kernelconfig.2624-rc4
Thanks for testing. So reverting Matthew's hotplug patch fixes the
problem though I have no idea how the patch leads to this. Seems that
nobody has any clue on that. We need to revert that patch for the
moment.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
