We discovered performance degradation with dbench when using kernel 2.6.23 compared to kernel 2.6.22.
In our case we booted a Linux in a IBM System z9 LPAR with 256MB of ram with
4 CPU's. This system uses a striped LV with 16 disks on a Storage Server
connected via 8 4GBit links.
A dbench was started on that system performing I/O operations on the
striped LV. dbench runs were performed with 1 to 62 processes. Measurements
with a 2.6.22 kernel were compared to measurements with a 2.6.23 kernel.
We saw a throughput degradation from 7.2 to 23.4 percent and a cost
increase from 9.5 to 29.5 percent. Costs are calculated by consumed CPU
microseconds divided by transferred bytes written/read.
The cost increase is caused by fewer transferred bytes at an almost
constant level of spent CPU microseconds (except for 50 processes).
The throughput can be increased by generating an imbalance in scheduling of
the dbench processes with different nice value for the processes. The more
imbalance is created the higher is the throughput. By monitoring the
throughput of disk I/O it can be observed that the iostat read throughput
is significantly lower with this imbalance while the iostat write
throughput stays the same.
|-----------------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+----------->
| | Device:| rrqm/s| wrqm/s| r/s| w/s| rsec/s| wsec/s| avgrq-sz| avgqu-sz| await|
|-----------------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+----------->
>-----------+-----------|
| svctm| %util|
>-----------+-----------|
|-----------------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+----------->
|Balanced | dm-0| 0| 0| 10592.54| 8067.16| 694885.57| 510479.6| 64.6| 16.96| 0.91|
|scheduling | | | | | | | | | | |
|-----------------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+----------->
>-----------+-----------|
| 0.05| 97.51|
>-----------+-----------|
|-----------------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+----------->
|Imbalanced | dm-0| 0| 0| 3401.00| 7993.03| 175693.53| 526833.83| 61.66| 14.88| 1.3|
|scheduling | | | | | | | | | | |
|-----------------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+-----------+----------->
>-----------+-----------|
| 0.07| 83.58|
>-----------+-----------|
With profiling we saw that the mpage_end_io_read function consumes much
more CPU with a 2.6.23 kernel than with a 2.6.22 kernel.
To me it looks like the page cache is under stronger pressure when all
processes are scheduled fairly.
Normalized Throughput of dbench
Number of 2.6.22 2.6.23 Difference
Processes in Percent
1 1 0.9 -10.24%
4 3.64 3.74 2.68%
8 3.57 3.71 3.83%
12 3.51 3.6 2.55%
16 3.4 3.53 3.96%
20 3.32 3.43 3.33%
26 3.29 3.4 3.29%
32 3.14 2.92 -7.25%
40 2.99 2.61 -12.92%
46 3 2.47 -17.69%
50 2.84 2.4 -15.55%
54 3.1 2.37 -23.42%
62 2.55 2.32 -8.99%
Normalized Costs of dbench
Number of 2.6.22 2.6.23 Difference
Processes in Percent
1 1 0.96 3.84%
4 1.08 1.05 2.97%
8 1.08 1.07 1.10%
12 1.09 1.1 -1.30%
16 1.1 1.12 -1.90%
20 1.12 1.15 -2.61%
26 1.18 1.17 0.86%
32 1.24 1.36 -9.50%
40 1.3 1.52 -16.97%
46 1.29 1.6 -23.92%
50 1.37 1.64 -20.12%
54 1.28 1.66 -29.60%
62 1.5 1.69 -12.84%
regards
Holger Wolf
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
