* Christoph Lameter <[email protected]> wrote:
> Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now
> pretty small so this is simply adding them together.
lots of rejects - merging this was pretty icky. Hopefully i got it right
- see below.
Ingo
----------------->
Subject: x86: Unify percpu.h
From: Christoph Lameter <[email protected]>
Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty
small so this is simply adding them together.
Cc: Rusty Russell <[email protected]>
Signed-off-by: Christoph Lameter <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
---
include/asm-x86/percpu.h | 145 ++++++++++++++++++++++++++++++++++++++++++--
include/asm-x86/percpu_32.h | 128 --------------------------------------
include/asm-x86/percpu_64.h | 29 --------
3 files changed, 141 insertions(+), 161 deletions(-)
Index: linux-x86.q/include/asm-x86/percpu.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu.h
+++ linux-x86.q/include/asm-x86/percpu.h
@@ -1,5 +1,142 @@
-#ifdef CONFIG_X86_32
-# include "percpu_32.h"
-#else
-# include "percpu_64.h"
+#ifndef _ASM_X86_PERCPU_H_
+#define _ASM_X86_PERCPU_H_
+
+#ifdef CONFIG_X86_64
+#include <linux/compiler.h>
+
+/* Same as asm-generic/percpu.h, except that we store the per cpu offset
+ in the PDA. Longer term the PDA and every per cpu variable
+ should be just put into a single section and referenced directly
+ from %gs */
+
+#ifdef CONFIG_SMP
+#include <asm/pda.h>
+
+#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
+#define __my_cpu_offset read_pda(data_offset)
+
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
#endif
+#include <asm-generic/percpu.h>
+
+DECLARE_PER_CPU(struct x8664_pda, pda);
+
+#else /* CONFIG_X86_64 */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ * var - variable name
+ * reg - 32bit register
+ *
+ * The resulting address is stored in the "reg" argument.
+ *
+ * Example:
+ * PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+#define PER_CPU(var, reg) \
+ movl %fs:per_cpu__##this_cpu_off, reg; \
+ lea per_cpu__##var(reg), reg
+#define PER_CPU_VAR(var) %fs:per_cpu__##var
+#else /* ! SMP */
+#define PER_CPU(var, reg) \
+ movl $per_cpu__##var, reg
+#define PER_CPU_VAR(var) per_cpu__##var
+#endif /* SMP */
+
+#else /* ...!ASSEMBLY */
+
+/*
+ * PER_CPU finds an address of a per-cpu variable.
+ *
+ * Args:
+ * var - variable name
+ * cpu - 32bit register containing the current CPU number
+ *
+ * The resulting address is stored in the "cpu" argument.
+ *
+ * Example:
+ * PER_CPU(cpu_gdt_descr, %ebx)
+ */
+#ifdef CONFIG_SMP
+
+#define __my_cpu_offset x86_read_percpu(this_cpu_off)
+
+/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%fs:"
+
+#else /* !SMP */
+
+#define __percpu_seg ""
+
+#endif /* SMP */
+
+#include <asm-generic/percpu.h>
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op,var,val) \
+ do { \
+ typedef typeof(var) T__; \
+ if (0) { T__ tmp__; tmp__ = (val); } \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 2: \
+ asm(op "w %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 4: \
+ asm(op "l %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ } while (0)
+
+#define percpu_from_op(op,var) \
+ ({ \
+ typeof(var) ret__; \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 2: \
+ asm(op "w "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 4: \
+ asm(op "l "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ ret__; })
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_X86_64 */
+#endif /* _ASM_X86_PERCPU_H_ */
Index: linux-x86.q/include/asm-x86/percpu_32.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu_32.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef __ARCH_I386_PERCPU__
-#define __ARCH_I386_PERCPU__
-
-#ifdef __ASSEMBLY__
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-#define PER_CPU(var, reg) \
- movl %fs:per_cpu__##this_cpu_off, reg; \
- lea per_cpu__##var(reg), reg
-#define PER_CPU_VAR(var) %fs:per_cpu__##var
-#else /* ! SMP */
-#define PER_CPU(var, reg) \
- movl $per_cpu__##var, reg
-#define PER_CPU_VAR(var) per_cpu__##var
-#endif /* SMP */
-
-#else /* ...!ASSEMBLY */
-
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- * var - variable name
- * cpu - 32bit register containing the current CPU number
- *
- * The resulting address is stored in the "cpu" argument.
- *
- * Example:
- * PER_CPU(cpu_gdt_descr, %ebx)
- */
-#ifdef CONFIG_SMP
-
-#define __my_cpu_offset x86_read_percpu(this_cpu_off)
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size) \
-do { \
- unsigned int __i; \
- for_each_possible_cpu(__i) \
- memcpy((pcpudst)+__per_cpu_offset[__i], \
- (src), (size)); \
-} while (0)
-
-/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */
-#define __percpu_seg "%%fs:"
-
-#else /* !SMP */
-
-#define __percpu_seg ""
-
-#endif /* SMP */
-
-#include <asm-generic/percpu.h>
-
-/* We can use this directly for local CPU (faster). */
-DECLARE_PER_CPU(unsigned long, this_cpu_off);
-
-/* For arch-specific code, we can use direct single-insn ops (they
- * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(op,var,val) \
- do { \
- typedef typeof(var) T__; \
- if (0) { T__ tmp__; tmp__ = (val); } \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 2: \
- asm(op "w %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 4: \
- asm(op "l %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- } while (0)
-
-#define percpu_from_op(op,var) \
- ({ \
- typeof(var) ret__; \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 2: \
- asm(op "w "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 4: \
- asm(op "l "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- ret__; })
-
-#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ARCH_I386_PERCPU__ */
Index: linux-x86.q/include/asm-x86/percpu_64.h
===================================================================
--- linux-x86.q.orig/include/asm-x86/percpu_64.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _ASM_X8664_PERCPU_H_
-#define _ASM_X8664_PERCPU_H_
-#include <linux/compiler.h>
-
-/* Same as asm-generic/percpu.h, except that we store the per cpu offset
- in the PDA. Longer term the PDA and every per cpu variable
- should be just put into a single section and referenced directly
- from %gs */
-
-#ifdef CONFIG_SMP
-#include <asm/pda.h>
-
-#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset)
-#define __my_cpu_offset read_pda(data_offset)
-
-#define per_cpu_offset(x) (__per_cpu_offset(x))
-
-/* A macro to avoid #include hell... */
-#define percpu_modcopy(pcpudst, src, size) \
-do { \
- unsigned int __i; \
- for_each_possible_cpu(__i) \
- memcpy((pcpudst)+__per_cpu_offset(__i), \
- (src), (size)); \
-} while (0)
-
-#endif
-#include <asm-generic/percpu.h>
-#endif /* _ASM_X8664_PERCPU_H_ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
