Re: Add the infamous Huawei E220 to option.c

[Jaime Velasco Juan <jsagarribay@gmail.com>]

Hi,

El jue. 29 de nov. de 2007, a las 15:05:50 +0100, Johann Wilhelm escribió:
> If everything's working please also add code to also support the other E220 
> device... so both PID 0x1003 and 0x1004 should be treaded the same way...
>
> to test the device with the 0x1004-PID maybe Jaime Velasco 
> <jsagarribay@gmail.com> could be asked.. he initialy added the lines for 
> this device in option.c
>

The following patch works for me (on kernel 2.6.23).


diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a18659e..352c94c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,8 +158,8 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */

> 73
>
> Zitat von Oliver Neukum <oliver@neukum.org>:
>
>> Am Donnerstag 29 November 2007 schrieb Rui Santos:
>>> >> Just to remember that that specific flag was one SET and, was removed,
>>> >> in part, because of what I state. Of course we aim at perfection but, if
>>> >> the benefits are only for a few situations and, will cause all this
>>> >> problems for all other, perhaps the reinsert of that flag would be a
>>> >> positive action.
>>> >>
>>> >
>>> > OK, can you provide "lsusb -v" for the device in the CD mode and in
>>> > the modem mode?
>>> >
>>> Of course. Heri it is.
>>
>> Thanks. Please try this patch.
>>
>> 	Regards
>> 		Oliver
>>
>> ----
>>
>> --- a/drivers/usb/serial/option.c	2007-11-29 12:35:09.000000000 +0100
>> +++ b/drivers/usb/serial/option.c	2007-11-29 12:47:34.000000000 +0100
>> @@ -158,7 +158,7 @@ static struct usb_device_id option_ids[]
>>  	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
>>  	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
>>  	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
>> -	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
>> +	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 
>> 0xff, 0xff, 0xff) },
>>  	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS) },
>>  	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin 
>> XS620/S640 */
>>  	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin 
>> S620 */
>>
>>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/