On Thu, 29 Nov 2007 15:35:32 +0800, Li Zefan wrote:
>
> Fix typo in comments.
>
> BTW: I have to fix coding style in arch/ia64/kernel/time.c also,
> otherwise checkpatch.pl will be complaining.
>
> Signed-off-by: Li Zefan <[email protected]>
>
> ---
> arch/ia64/kernel/time.c | 14 +++++++-------
> arch/x86/kernel/time_64.c | 2 +-
> include/linux/hrtimer.h | 2 +-
> include/linux/jiffies.h | 6 +++---
> kernel/time.c | 4 ++--
> kernel/time/clockevents.c | 2 +-
> kernel/time/timekeeping.c | 2 +-
> 7 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
> index 2bb8421..5fc8c89 100644
> --- a/arch/ia64/kernel/time.c
> +++ b/arch/ia64/kernel/time.c
> @@ -49,13 +49,13 @@ EXPORT_SYMBOL(last_cli_ip);
> #endif
>
> static struct clocksource clocksource_itc = {
> - .name = "itc",
> - .rating = 350,
> - .read = itc_get_cycles,
> - .mask = CLOCKSOURCE_MASK(64),
> - .mult = 0, /*to be caluclated*/
> - .shift = 16,
> - .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> + .name = "itc",
> + .rating = 350,
> + .read = itc_get_cycles,
> + .mask = CLOCKSOURCE_MASK(64),
> + .mult = 0, /*to be calculated*/
> + .shift = 16,
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> };
> static struct clocksource *itc_clocksource;
>
> diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
> index 368b194..2cc7570 100644
> --- a/arch/x86/kernel/time_64.c
> +++ b/arch/x86/kernel/time_64.c
> @@ -235,7 +235,7 @@ static unsigned int __init tsc_calibrate_cpu_khz(void)
> reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
> }
> local_irq_save(flags);
> - /* start meauring cycles, incrementing from 0 */
> + /* start measuring cycles, incrementing from 0 */
> wrmsrl(MSR_K7_PERFCTR0 + i, 0);
> wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
> rdtscl(tsc_start);
> diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
> index 80c7e98..d42c6be 100644
> --- a/include/linux/hrtimer.h
> +++ b/include/linux/hrtimer.h
> @@ -78,7 +78,7 @@ enum hrtimer_cb_mode {
> * as otherwise the timer could be removed before the softirq code finishes the
> * the handling of the timer.
> *
> - * The HRTIMER_STATE_ENQUEUE bit is always or'ed to the current state to
> + * The HRTIMER_STATE_ENQUEUED bit is always or'ed to the current state to
> * preserve the HRTIMER_STATE_CALLBACK bit in the above scenario.
> *
> * All state transitions are protected by cpu_base->lock.
> diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
> index 8b08002..b071f46 100644
> --- a/include/linux/jiffies.h
> +++ b/include/linux/jiffies.h
> @@ -36,7 +36,7 @@
> /* LATCH is used in the interval timer and ftape setup. */
> #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
>
> -/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
> +/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, then we can
divide
> * improve accuracy by shifting LSH bits, hence calculating:
> * (NOM << LSH) / DEN
> * This however means trouble for large NOM, because (NOM << LSH) may no
> @@ -154,7 +154,7 @@ extern unsigned long preset_lpj;
> * We want to do realistic conversions of time so we need to use the same
> * values the update wall clock code uses as the jiffies size. This value
> * is: TICK_NSEC (which is defined in timex.h). This
> - * is a constant and is in nanoseconds. We will used scaled math
> + * is a constant and is in nanoseconds. We will use scaled math
> * with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
> * NSEC_JIFFIE_SC. Note that these defines contain nothing but
> * constants and so are computed at compile time. SHIFT_HZ (computed in
> @@ -198,7 +198,7 @@ extern unsigned long preset_lpj;
> * operator if the result is a long long AND at least one of the
> * operands is cast to long long (usually just prior to the "*" so as
> * not to confuse it into thinking it really has a 64-bit operand,
> - * which, buy the way, it can do, but it take more code and at least 2
> + * which, buy the way, it can do, but it takes more code and at least 2
by the way
(and does this really add anything to the sentence?)
> * mpys).
>
> * We also need to be aware that one second in nanoseconds is only a
> diff --git a/kernel/time.c b/kernel/time.c
> index 09d3c45..c25f472 100644
> --- a/kernel/time.c
> +++ b/kernel/time.c
> @@ -266,7 +266,7 @@ EXPORT_SYMBOL(jiffies_to_usecs);
> *
> * This function should be only used for timestamps returned by
> * current_kernel_time() or CURRENT_TIME, not with do_gettimeofday() because
> - * it doesn't handle the better resolution of the later.
> + * it doesn't handle the better resolution of the latter.
> */
> struct timespec timespec_trunc(struct timespec t, unsigned gran)
> {
> @@ -314,7 +314,7 @@ EXPORT_SYMBOL_GPL(getnstimeofday);
> * This algorithm was first published by Gauss (I think).
> *
> * WARNING: this function will overflow on 2106-02-07 06:28:16 on
> - * machines were long is 32-bit! (However, as time_t is signed, we
> + * machines where long is 32-bit! (However, as time_t is signed, we
> * will already get problems at other places on 2038-01-19 03:14:08)
> */
> unsigned long
> diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
> index 68fbe73..6e2b7ef 100644
> --- a/kernel/time/clockevents.c
> +++ b/kernel/time/clockevents.c
> @@ -123,7 +123,7 @@ static void clockevents_do_notify(unsigned long reason, void *dev)
> }
>
> /*
> - * Called after a notify add to make devices availble which were
> + * Called after a notify add to make devices available which were
> * released from the notifier call.
> */
> static void clockevents_notify_released(void)
> diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
> index e112dc4..cd26cbe 100644
> --- a/kernel/time/timekeeping.c
> +++ b/kernel/time/timekeeping.c
> @@ -372,7 +372,7 @@ static __always_inline int clocksource_bigadjust(s64 error, s64 *interval,
> * with losing too many ticks, otherwise we would overadjust and
> * produce an even larger error. The smaller the adjustment the
> * faster we try to adjust for it, as lost ticks can do less harm
> - * here. This is tuned so that an error of about 1 msec is adusted
> + * here. This is tuned so that an error of about 1 msec is adjusted
> * within about 1 sec (or 2^20 nsec in 2^SHIFT_HZ ticks).
> */
> error2 = clock->error >> (TICK_LENGTH_SHIFT + 22 - 2 * SHIFT_HZ);
> --
> 1.5.3.rc7
>
--
Chris
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
