On Thu, Nov 29 2007 at 1:36 +0200, Andrew Morton <[email protected]> wrote:
> On Wed, 28 Nov 2007 16:14:21 -0700
> Matthew Wilcox <[email protected]> wrote:
>
>> On Wed, Nov 28, 2007 at 01:40:36PM -0800, Andrew Morton wrote:
>>> On Wed, 28 Nov 2007 23:01:31 +0300
>>> Alexey Dobriyan <[email protected]> wrote:
>>>
>>>> Reliably spams dmesg with end_request() horrors. This happens when git
>>>> starts checking out linux tree to fresh ext2 partition. Disk is several
>>>> month old and there were no prolems with, say, 2.6.24-rc3:
>> Could you try reverting 6f5391c283d7fdcf24bf40786ea79061919d1e1d and see
>> if the problem still exists?
>>
>
> That's not completely trivial..
>
> I did a hand-made revert against 2.6.24-rc3-mm2 (below) but some other patch
> in there causes:
>
> drivers/scsi/scsi_lib.c: In function 'scsi_blk_pc_done':
> drivers/scsi/scsi_lib.c:1251: error: 'struct scsi_cmnd' has no member named 'request_bufflen'
>
That would be the bidi patches. You need to use scsi_bufflen(cmd) instead of
cmd->request_bufflen. (See below)
Do you need that I send a patch?
>
> --- a/drivers/scsi/scsi.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/drivers/scsi/scsi.c
> @@ -59,7 +59,6 @@
> #include <scsi/scsi_cmnd.h>
> #include <scsi/scsi_dbg.h>
> #include <scsi/scsi_device.h>
> -#include <scsi/scsi_driver.h>
> #include <scsi/scsi_eh.h>
> #include <scsi/scsi_host.h>
> #include <scsi/scsi_tcq.h>
> @@ -379,8 +378,9 @@ void scsi_log_send(struct scsi_cmnd *cmd
> scsi_print_command(cmd);
> if (level > 3) {
> printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
> - " queuecommand 0x%p\n",
> + " done = 0x%p, queuecommand 0x%p\n",
> scsi_sglist(cmd), scsi_bufflen(cmd),
> + cmd->done,
> cmd->device->host->hostt->queuecommand);
>
> }
> @@ -667,12 +667,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
> blk_complete_request(rq);
> }
>
> -/* Move this to a header if it becomes more generally useful */
> -static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
> -{
> - return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
> -}
> -
> /**
> * scsi_finish_command - cleanup and pass command back to upper layer
> * @cmd: the command
> @@ -685,8 +679,6 @@ void scsi_finish_command(struct scsi_cmn
> {
> struct scsi_device *sdev = cmd->device;
> struct Scsi_Host *shost = sdev->host;
> - struct scsi_driver *drv;
> - unsigned int good_bytes;
>
> scsi_device_unbusy(sdev);
>
> @@ -712,13 +704,7 @@ void scsi_finish_command(struct scsi_cmn
> "Notifying upper driver of completion "
> "(result %x)\n", cmd->result));
>
> - good_bytes = scsi_bufflen(cmd);
> - if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
> - drv = scsi_cmd_to_driver(cmd);
> - if (drv->done)
> - good_bytes = drv->done(cmd);
> - }
> - scsi_io_completion(cmd, good_bytes);
> + cmd->done(cmd);
> }
> EXPORT_SYMBOL(scsi_finish_command);
>
> diff -puN drivers/scsi/scsi_error.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d drivers/scsi/scsi_error.c
> --- a/drivers/scsi/scsi_error.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/drivers/scsi/scsi_error.c
> @@ -1697,6 +1697,7 @@ scsi_reset_provider(struct scsi_device *
>
> scmd->scsi_done = scsi_reset_provider_done_command;
> memset(&scmd->sdb, 0, sizeof(scmd->sdb));
> + scmd->done = NULL;
>
> scmd->cmd_len = 0;
>
> diff -puN drivers/scsi/scsi_lib.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d drivers/scsi/scsi_lib.c
> --- a/drivers/scsi/scsi_lib.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/drivers/scsi/scsi_lib.c
> @@ -944,6 +944,7 @@ void scsi_end_bidi_request(struct scsi_c
>
> scsi_finalize_request(cmd, 1);
> }
> +EXPORT_SYMBOL(scsi_io_completion);
>
> /*
> * Function: scsi_io_completion()
> @@ -1238,6 +1239,18 @@ static struct scsi_cmnd *scsi_get_cmd_fr
> return cmd;
> }
>
> +static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
> +{
> + BUG_ON(!blk_pc_request(cmd->request));
> + /*
> + * This will complete the whole command with uptodate=1 so
> + * as far as the block layer is concerned the command completed
> + * successfully. Since this is a REQ_BLOCK_PC command the
> + * caller should check the request's errors value
> + */
> + scsi_io_completion(cmd, cmd->request_bufflen);
+ scsi_io_completion(cmd, scsi_bufflen(cmd));
> +}
> +
> int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
> {
> struct scsi_cmnd *cmd;
> @@ -1285,6 +1298,7 @@ int scsi_setup_blk_pc_cmnd(struct scsi_d
> cmd->transfersize = req->data_len;
> cmd->allowed = req->retries;
> cmd->timeout_per_command = req->timeout;
> + cmd->done = scsi_blk_pc_done;
> return BLKPREP_OK;
> }
> EXPORT_SYMBOL(scsi_setup_blk_pc_cmnd);
> diff -puN drivers/scsi/scsi_priv.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d drivers/scsi/scsi_priv.h
> --- a/drivers/scsi/scsi_priv.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/drivers/scsi/scsi_priv.h
> @@ -68,7 +68,6 @@ extern int scsi_maybe_unblock_host(struc
> extern void scsi_device_unbusy(struct scsi_device *sdev);
> extern int scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
> extern void scsi_next_command(struct scsi_cmnd *cmd);
> -extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
> extern void scsi_run_host_queues(struct Scsi_Host *shost);
> extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
> extern void scsi_free_queue(struct request_queue *q);
> diff -puN drivers/scsi/sd.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d drivers/scsi/sd.c
> --- a/drivers/scsi/sd.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/drivers/scsi/sd.c
> @@ -86,19 +86,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
> MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
> MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
>
> -static int sd_revalidate_disk(struct gendisk *);
> -static int sd_probe(struct device *);
> -static int sd_remove(struct device *);
> -static void sd_shutdown(struct device *);
> -static int sd_suspend(struct device *, pm_message_t state);
> -static int sd_resume(struct device *);
> -static void sd_rescan(struct device *);
> -static int sd_done(struct scsi_cmnd *);
> -static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
> -static void scsi_disk_release(struct class_device *cdev);
> -static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
> -static void sd_print_result(struct scsi_disk *, int);
> -
> static DEFINE_IDR(sd_index_idr);
> static DEFINE_SPINLOCK(sd_index_lock);
>
> @@ -253,7 +240,6 @@ static struct scsi_driver sd_template =
> .shutdown = sd_shutdown,
> },
> .rescan = sd_rescan,
> - .done = sd_done,
> };
>
> /*
> @@ -520,6 +506,12 @@ static int sd_prep_fn(struct request_que
> SCpnt->timeout_per_command = timeout;
>
> /*
> + * This is the completion routine we use. This is matched in terms
> + * of capability to this function.
> + */
> + SCpnt->done = sd_rw_intr;
> +
> + /*
> * This indicates that the command is ready from our end to be
> * queued.
> */
> @@ -898,13 +890,13 @@ static struct block_device_operations sd
> };
>
> /**
> - * sd_done - bottom half handler: called when the lower level
> + * sd_rw_intr - bottom half handler: called when the lower level
> * driver has completed (successfully or otherwise) a scsi command.
> * @SCpnt: mid-level's per command structure.
> *
> * Note: potentially run from within an ISR. Must not block.
> **/
> -static int sd_done(struct scsi_cmnd *SCpnt)
> +static void sd_rw_intr(struct scsi_cmnd * SCpnt)
> {
> int result = SCpnt->result;
> unsigned int xfer_size = scsi_bufflen(SCpnt);
> @@ -925,7 +917,7 @@ static int sd_done(struct scsi_cmnd *SCp
> SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
> if (sense_valid) {
> SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
> - "sd_done: sb[respc,sk,asc,"
> + "sd_rw_intr: sb[respc,sk,asc,"
> "ascq]=%x,%x,%x,%x\n",
> sshdr.response_code,
> sshdr.sense_key, sshdr.asc,
> @@ -997,7 +989,7 @@ static int sd_done(struct scsi_cmnd *SCp
> break;
> }
> out:
> - return good_bytes;
> + scsi_io_completion(SCpnt, good_bytes);
> }
>
> static int media_not_present(struct scsi_disk *sdkp,
> diff -puN drivers/scsi/sr.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d drivers/scsi/sr.c
> --- a/drivers/scsi/sr.c~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/drivers/scsi/sr.c
> @@ -78,7 +78,6 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
>
> static int sr_probe(struct device *);
> static int sr_remove(struct device *);
> -static int sr_done(struct scsi_cmnd *);
>
> static struct scsi_driver sr_template = {
> .owner = THIS_MODULE,
> @@ -87,7 +86,6 @@ static struct scsi_driver sr_template =
> .probe = sr_probe,
> .remove = sr_remove,
> },
> - .done = sr_done,
> };
>
> static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
> @@ -221,12 +219,12 @@ out:
> }
>
> /*
> - * sr_done is the interrupt routine for the device driver.
> + * rw_intr is the interrupt routine for the device driver.
> *
> - * It will be notified on the end of a SCSI read / write, and will take one
> + * It will be notified on the end of a SCSI read / write, and will take on
> * of several actions based on success or failure.
> */
> -static int sr_done(struct scsi_cmnd *SCpnt)
> +static void rw_intr(struct scsi_cmnd * SCpnt)
> {
> int result = SCpnt->result;
> int this_count = scsi_bufflen(SCpnt);
> @@ -299,7 +297,12 @@ static int sr_done(struct scsi_cmnd *SCp
> }
> }
>
> - return good_bytes;
> + /*
> + * This calls the generic completion function, now that we know
> + * how many actual sectors finished, and how many sectors we need
> + * to say have failed.
> + */
> + scsi_io_completion(SCpnt, good_bytes);
> }
>
> static int sr_prep_fn(struct request_queue *q, struct request *rq)
> @@ -434,6 +437,12 @@ static int sr_prep_fn(struct request_que
> SCpnt->timeout_per_command = timeout;
>
> /*
> + * This is the completion routine we use. This is matched in terms
> + * of capability to this function.
> + */
> + SCpnt->done = rw_intr;
> +
> + /*
> * This indicates that the command is ready from our end to be
> * queued.
> */
> diff -puN include/scsi/scsi_cmnd.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d include/scsi/scsi_cmnd.h
> --- a/include/scsi/scsi_cmnd.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/include/scsi/scsi_cmnd.h
> @@ -41,6 +41,7 @@ struct scsi_cmnd {
> struct list_head list; /* scsi_cmnd participates in queue lists */
> struct list_head eh_entry; /* entry for the host eh_cmd_q */
> int eh_eflags; /* Used by error handlr */
> + void (*done) (struct scsi_cmnd *); /* Mid-level done function */
>
> /*
> * A SCSI Command is assigned a nonzero serial_number before passed
> @@ -121,6 +122,7 @@ extern struct scsi_cmnd *__scsi_get_comm
> extern void scsi_put_command(struct scsi_cmnd *);
> extern void __scsi_put_command(struct Scsi_Host *, struct scsi_cmnd *,
> struct device *);
> +extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
> extern void scsi_finish_command(struct scsi_cmnd *cmd);
> extern void scsi_req_abort_cmd(struct scsi_cmnd *cmd);
>
> diff -puN include/scsi/scsi_driver.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d include/scsi/scsi_driver.h
> --- a/include/scsi/scsi_driver.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/include/scsi/scsi_driver.h
> @@ -15,7 +15,6 @@ struct scsi_driver {
> struct device_driver gendrv;
>
> void (*rescan)(struct device *);
> - int (*done)(struct scsi_cmnd *);
> };
> #define to_scsi_driver(drv) \
> container_of((drv), struct scsi_driver, gendrv)
> diff -puN include/scsi/sd.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d include/scsi/sd.h
> --- a/include/scsi/sd.h~revert-6f5391c283d7fdcf24bf40786ea79061919d1e1d
> +++ a/include/scsi/sd.h
> @@ -48,6 +48,19 @@ struct scsi_disk {
> };
> #define to_scsi_disk(obj) container_of(obj,struct scsi_disk,cdev)
>
> +static int sd_revalidate_disk(struct gendisk *disk);
> +static void sd_rw_intr(struct scsi_cmnd * SCpnt);
> +static int sd_probe(struct device *);
> +static int sd_remove(struct device *);
> +static void sd_shutdown(struct device *dev);
> +static int sd_suspend(struct device *dev, pm_message_t state);
> +static int sd_resume(struct device *dev);
> +static void sd_rescan(struct device *);
> +static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
> +static void scsi_disk_release(struct class_device *cdev);
> +static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
> +static void sd_print_result(struct scsi_disk *, int);
> +
> #define sd_printk(prefix, sdsk, fmt, a...) \
> (sdsk)->disk ? \
> sdev_printk(prefix, (sdsk)->device, "[%s] " fmt, \
> _
>
> -
Boaz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
