On Tuesday 27 November 2007, Bartlomiej Zolnierkiewicz wrote:
> On Tuesday 27 November 2007, Andrew Morton wrote:
> > On Mon, 26 Nov 2007 15:16:13 +0800 Denis Cheng <[email protected]> wrote:
> >
> > > these utilities implemented in lib/hexdump.c are more handy, please use this.
> > >
> > > ...
> > >
> > > --- a/drivers/scsi/ide-scsi.c
> > > +++ b/drivers/scsi/ide-scsi.c
> > > @@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
> > > }
> > > }
> > >
> > > -static void hexdump(u8 *x, int len)
> > > -{
> > > - int i;
> > > -
> > > - printk("[ ");
> > > - for (i = 0; i < len; i++)
> > > - printk("%x ", x[i]);
> > > - printk("]\n");
> > > -}
> > > -
> > > static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
> > > {
> > > idescsi_scsi_t *scsi = drive_to_idescsi(drive);
> > > @@ -282,7 +272,7 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
> > > pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
> > > if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
> > > printk ("ide-scsi: %s: queue cmd = ", drive->name);
> > > - hexdump(pc->c, 6);
> > > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 6, 1);
> > > }
> > > rq->rq_disk = scsi->disk;
> > > return ide_do_drive_cmd(drive, rq, ide_preempt);
> > > @@ -337,7 +327,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
> > > idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
> > > if (log) {
> > > printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name,
> opc->scsi_cmd->serial_number);
> > > - hexdump(pc->buffer,16);
> > > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->buffer, 16, 1);
> > > }
> > > memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
> > > kfree(pc->buffer);
> > > @@ -816,10 +806,10 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
> > >
> > > if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
> > > printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
> > > - hexdump(cmd->cmnd, cmd->cmd_len);
> > > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, cmd->cmnd, cmd->cmd_len, 1);
> > > if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
> > > printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
> > > - hexdump(pc->c, 12);
> > > + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 1, pc->c, 12, 1);
> > > }
> > > }
> > >
>
> I applied the patch with a couple of fixes:
> - s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy
> - s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/
> - don't include ASCII dump
> - respect 80-columns limit
>
> > Would you believe that this patch (which removes code) actually increases
> > drivers/scsi/ide-scsi.o .text by 75 bytes?
>
> Yeah, it somehow shrank down to +58 bytes after fixes but this is still bad.
Heh, incremental (since I pushed the previous one to Linus already)
patch which cuts 85 bytes from ide-scsi...
[PATCH] ide-scsi: add ide_scsi_hex_dump() helper
Cc: Andrew Morton <[email protected]>
Cc: Denis Cheng <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
---
drivers/scsi/ide-scsi.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
Index: b/drivers/scsi/ide-scsi.c
===================================================================
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -242,6 +242,11 @@ static void idescsi_output_buffers (ide_
}
}
+static void ide_scsi_hex_dump(u8 *data, int len)
+{
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+}
+
static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
@@ -272,8 +277,7 @@ static int idescsi_check_condition(ide_d
pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c,
- 6, 0);
+ ide_scsi_hex_dump(pc->c, 6);
}
rq->rq_disk = scsi->disk;
return ide_do_drive_cmd(drive, rq, ide_preempt);
@@ -328,8 +332,7 @@ static int idescsi_end_request (ide_driv
idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name,
opc->scsi_cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- pc->buffer, 16, 0);
+ ide_scsi_hex_dump(pc->buffer, 16);
}
memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
kfree(pc->buffer);
@@ -808,12 +811,10 @@ static int idescsi_queue (struct scsi_cm
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- cmd->cmnd, cmd->cmd_len, 0);
+ ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
- pc->c, 12, 0);
+ ide_scsi_hex_dump(pc->c, 12);
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
