Re: 2.6.24-rc3-mm1: I/O error, system hangs

[Laurent Riffard <laurent.riffard@free.fr>]

Le 25.11.2007 08:37, James Bottomley a écrit :
> On Sat, 2007-11-24 at 23:59 +0100, Laurent Riffard wrote:
>> Le 24.11.2007 14:26, James Bottomley a écrit :
>>> OK, could you post dmesgs again, please.  I actually tested this
>> with an
>>> aic79xx card, and for me it does cause Domain Validation to succeed
>>> again.
>> James, 
>>
>> Here is a dmesg produced by 2.6.24-rc3-mm1 + your patch "separates
>> the 
>> BLOCK and QUIESCE states
>> correctly" (http://lkml.org/lkml/2007/11/24/8).
>>
>> How to reproduce :
>> - boot
>> - switch to a text console
>> - capture dmesg in a file, sync, etc. There are 3 I/O errors, but the 
>>   system does work.
>> - switch to X console, log in the Gnome Desktop, the system partially 
>>   hangs.
>> - switch back to a text console: dmesg(1) still works, it shows some 
>>   additonal I/O errors. At this point, any disk access makes the system 
>>   completely hung.
>>
>> Additionnal data:
>> - the I/O errors always happen on the same blocks.
>>
>> plain text document attachment (dmesg-2.6.24-rc3-mm1-patched)
> [...]
>> [   25.521256] scsi0 : pata_via
>> [   25.521711] scsi1 : pata_via
>> [   25.524089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
>> [   25.524176] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
>> [   25.683141] ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100
>> [   25.683208] ata1.00: 78165360 sectors, multi 16: LBA 
>> [   25.683475] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
>> [   25.684116] ata1.01: 160086528 sectors, multi 16: LBA 
>> [   25.691127] ata1.00: configured for UDMA/100
>> [   25.699142] ata1.01: configured for UDMA/100
>> [   26.170860] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33
>> [   26.171562] ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr
>> [   26.330839] ata2.00: configured for UDMA/33
>> [   26.490828] ata2.01: configured for MWDMA2
>> [   26.503014] scsi 0:0:0:0: Direct-Access     ATA      ST340016A 3.75 PQ: 0 ANSI: 5
>> [   26.504670] scsi 0:0:1:0: Direct-Access     ATA      Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
>> [   26.509842] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5
>> [   26.511673] scsi 1:0:1:0: CD-ROM            E-IDE    CD-950E/AKU A4Q  PQ: 0 ANSI: 5
> [...]
>> [   60.216113] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
>> [   60.216124] end_request: I/O error, dev sda, sector 16460
> 
> I think this one's quite easy:  PATA devices in libata are queue depth 1
> (since they don't do NCQ).  Thus, they're peculiarly sensitive to the
> bug where we fail over queue depth requests.
> 
> On the other hand, I don't see how a filesystem request is getting
> REQ_FAILFAST ... unless there's a bio or readahead issue involved.
> Anyway, could you try this patch:
> 
> http://marc.info/?l=linux-scsi&m=119592627425498
> 
> Which should fix the queue depth issue, and see if the errors go away?

No, this one doesn't help...

-- 
laurent
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/