On Nov 24, 2007 12:36 PM, Andrey Borzenkov <[email protected]> wrote:
> I have no COM port on notebook (without port replicator which I do not have)
> so COM is disabled in BIOS. No ttyS* is detected during boot (and no device
> created) but I just noticed that serial modules are still loaded. Well, this
> partially defeats the purpose of disabling COM port - the intention was to
> free resources by *not* loading unneeded modules ...
>
> This may have something to do with (ACPI) PnP which apparently believes COM is alive.
> Notebook is Toshiba Portege 4000.
>
> {pts/0}% lsmod | grep 82
> 8250_pnp 9792 0
> 8250 24660 1 8250_pnp
> serial_core 22872 1 8250
>
> {pts/0}% lspnp -v
> 00:00 PNP0c01 System board
> state = active
> mem 0x0-0x9ffff
> mem 0xe0000-0xeffff
> mem 0xf0000-0xfffff
> mem 0x100000-0x1ef5ffff
>
> 00:01 PNP0a03 PCI bus
> state = active
> io 0xcf8-0xcff
>
> 00:02 PNP0200 AT DMA controller
> state = active
> io 0x0-0xf
> io 0x81-0x83
> io 0x87-0x87
> io 0x89-0x8b
> io 0x8f-0x8f
> io 0xc0-0xdf
> dma 4
>
> 00:03 PNP0800 AT speaker
> state = active
> io 0x61-0x61
>
> 00:04 PNP0c04 Math coprocessor
> state = active
> io 0xf0-0xff
> irq 13
>
> 00:05 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support)
> state = active
> io 0x60-0x60
> io 0x64-0x64
> irq 1
>
> 00:06 PNP0f13 PS/2 port for PS/2-style mice
> state = active
> irq 12
>
> 00:07 PNP0b00 AT real-time clock
> state = active
> io 0x70-0x71
> irq 8
>
> 00:08 PNP0c02 Motherboard resources
> state = active
> io 0x2e-0x2f
> io 0x62-0x62
> io 0x66-0x66
> io 0x80-0x80
> io 0x84-0x86
> io 0x88-0x88
> io 0x8c-0x8e
> io 0x92-0x92
>
> 00:09 PNP0501 16550A-compatible serial port
> state = active
> io 0x3f8-0x3ff
> irq 5
>
> 00:0a SMCf010 SMC Fast Infrared Port
> state = disabled
>
> 00:0b PNP0401 ECP printer port
> state = disabled
>
> ..
> [ 126.035809] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
...
> [ 126.107096] serial 00:09: activated
...
Can you cat /sys/firmware/acpi/DSDT and use iasl to decode it?
it seems that your BIOS has problem about com setup.
YH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
