Re: radeonfb i2c regression post-2.6.18.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 24 Nov 2007 12:11:04 +1100, Benjamin Herrenschmidt wrote:
> 
> On Fri, 2007-11-23 at 23:29 +0100, Jean Delvare wrote:
> > On Fri, 23 Nov 2007 17:00:52 +0100, Michael Buesch wrote:
> > > This patch fixes my crash problem.
> > 
> > Out of curiosity, what kind of crash was it? I admit that I can't see
> > how the code could crash.
> 
> Really sneaky... apparently, keeping the i2c lines asserted on his
> laptop model would drain enough current through the pullups (or the
> chip) that the temperature will raise significantly, causing a thermal
> shutdown if the machine was already warm.
> 
> A bit scary... looks to me that a pullup is a bit too weak somewhere on
> the motherboard.
> 
> That also means that this fix should reduce power consumption on the
> battery significantly on those machines as it must take quite a bit of
> power to increase the temperature that significantly (either that, or
> the heating part sits just next to the sensor).

Wow, nasty. Then my patch really needs to go to Linus at the earliest.

Thanks,
-- 
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux