Re: Use of mutex in interrupt context flawed/impossible, need advice.

[Robert Hancock <hancockr@shaw.ca>]

Leon Woestenberg wrote:
> Hello,
>
>
> I'm converting an out-of-tree (*1) driver from binary semaphore to mutex.
>
> Userspace updates a look-up-table using write(). The driver tries to
> write this LUT to the FPGA in the (video frame) interrupt handler. It
> is important that the LUT is consistent and thus changed atomically.
> Note that it is not important that the LUT is updated each interrupt.
>
> The current approach is to try-down()ing a binary semaphore in
> interrupt context, and write the LUT to the FPGA if the semaphore was
> down()ed, do nothing else.
> The write() down()s the semaphore as well before updating the
> in-driver-copy of the LUT, then up()s it again.
>
> I understand this design is not clean (*2), and not even possible with
> mutexes, as mutex_trylock() is not interrupt safe.
>
> My current approach would be to have userspace write into a shadow
> copy, and use a spinlock to update the live copy. The interrupt then
> would try a spinlock.

Unless this update into the FPGA takes a significant amount of time, I 
wouldn't bother with that complexity - just do spin_lock_irq/irqsave on 
that spinlock.

Using a trylock for this rather sucks since the behavior is entirely 
non-deterministic. It could take a really long time in some cases for 
the trylock to ever succeed.

> My feeling is that we have a  valid use of mutex_trylock() in
> interrupt context; "i.e. update LUT if we can do so consistently and
> in time, or not at all".
>
> I would like to know why this is not so, and if someone has a cleaner
> proposal than the "try spinlock" approach?

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/