WARN during log message being output to ttyS0 and netconsole:
[2059664.615816] __iptables__: init4 IN=ppp0 OUT=ppp0 WARNING: at kernel/softirq.c:139 local_bh_enable()
[2059664.620535] [<80120364>] local_bh_enable+0x3c/0x97
[2059664.620553] [<802e3356>] __nf_ct_ext_destroy+0x35/0x5b
[2059664.620569] [<802dfbeb>] destroy_conntrack+0x5e/0xf6
[2059664.620577] [<802db821>] nf_conntrack_destroy+0x1f/0x3f
[2059664.620585] [<802c0c71>] __kfree_skb+0xb8/0xf6
[2059664.620597] [<802d00f0>] zap_completion_queue+0x3e/0x64
[2059664.620606] [<802d0583>] find_skb+0x14/0x6b
[2059664.620612] [<801167cc>] inc_nr_running+0x12/0x25
[2059664.620622] [<802d0fd8>] netpoll_send_udp+0x2d/0x251
[2059664.620630] [<80226135>] uart_console_write+0x2a/0x33
[2059664.620645] [<80241319>] write_msg+0x32/0x41
[2059664.620657] [<8011c205>] __call_console_drivers+0x61/0x6d
[2059664.620669] [<8011c3fc>] release_console_sem+0x164/0x1bf
[2059664.620679] [<8011c81f>] vprintk+0x27a/0x2ff
[2059664.620692] [<8013881e>] handle_IRQ_event+0x1a/0x3f
[2059664.620702] [<801203a5>] local_bh_enable+0x7d/0x97
[2059664.620709] [<8031ae6a>] fn_hash_lookup+0xb0/0xcd
[2059664.620723] [<8011c8bf>] printk+0x1b/0x1f
[2059664.620731] [<8032b372>] ipt_log_packet+0x71/0x15e
[2059664.620747] [<8032b4a0>] ipt_log_target+0x41/0x4a
[2059664.620757] [<802ea446>] ipt_limit_match+0x58/0x76
[2059664.620766] [<8032b45f>] ipt_log_target+0x0/0x4a
[2059664.620774] [<803288c5>] ipt_do_table+0x3e2/0x479
[2059664.620785] [<80331228>] xfrm_policy_put_afinfo+0xa/0x1e
[2059664.620800] [<80332219>] xfrm_lookup+0x15/0x69
[2059664.620809] [<802db7d0>] nf_iterate+0x38/0x6a
[2059664.620822] [<802dbb60>] nf_hook_slow+0x57/0xe0
[2059664.620830] [<802f1e7c>] ip_forward_finish+0x0/0x22
[2059664.620841] [<802f20d1>] ip_forward+0x233/0x2ae
[2059664.620849] [<802f1e7c>] ip_forward_finish+0x0/0x22
[2059664.620859] [<802f0e7a>] ip_rcv+0x46f/0x49c
[2059664.620866] [<802f04a8>] ip_rcv_finish+0x0/0x2ab
[2059664.620876] [<802f0a0b>] ip_rcv+0x0/0x49c
[2059664.620884] [<802c544a>] netif_receive_skb+0x326/0x3ae
[2059664.620894] [<802c6efe>] process_backlog+0x6d/0xd2
[2059664.620903] [<802c766e>] net_rx_action+0x86/0x193
[2059664.620911] [<80120001>] __do_softirq+0x40/0x85
[2059664.620919] [<8012006d>] do_softirq+0x27/0x2b
[2059664.620925] [<8012023d>] irq_exit+0x2d/0x37
[2059664.620931] [<801062d9>] do_IRQ+0x7a/0x8d
[2059664.620943] [<8010479b>] common_interrupt+0x23/0x28
[2059664.620954] [<80209f85>] acpi_processor_idle+0x235/0x3a0
[2059664.620967] [<80102344>] cpu_idle+0x43/0x6c
[2059664.620973] [<804aa99e>] start_kernel+0x210/0x215
[2059664.620989] [<804aa317>] unknown_bootoption+0x0/0x195
[2059664.620998] =======================
[2059664.852188] SRC=66.249.93.147 DST=* LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=23868 DF PROTO=TCP SPT=80 DPT=55219 WINDOW=0 RES=0x00 RST URGP=0
[ 0.000000] Linux version 2.6.23-git (byte@proxima) (gcc version 4.1.2 20070214 ( (gdc 0.23, using dmd 1.007)) (Gentoo 4.1.2)) #41 PREEMPT Sun Oct 21 20:42:28 BST 2007
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 1022MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4d50
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Entering add_active_range(0, 0, 261856) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 261856
[ 0.000000] HighMem 261856 -> 261856
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261856
[ 0.000000] On node 0 totalpages: 261856
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 2013 pages used for memmap
[ 0.000000] Normal zone: 255747 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6E10, 0014 (r0 CN700 )
[ 0.000000] ACPI: RSDT 3FEE3040, 002C (r1 CN700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FEE30C0, 0074 (r1 CN700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FEE3180, 4FC3 (r1 CN700 AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEE0000, 0040
[ 0.000000] ACPI: APIC 3FEE81C0, 005A (r1 CN700 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
[ 0.000000] Built 1 zonelists in Zone order. Total pages: 259811
[ 0.000000] Kernel command line: root=/dev/hda1 ro panic=10 [email protected]/eth0,[email protected]/ noapic console=tty0 console=ttyS0,115200
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1500.153 MHz processor.
[ 14.647474] Console: colour dummy device 80x25
[ 14.647481] console [tty0] enabled
[ 14.647699] console [ttyS0] enabled
[ 14.941991] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.950229] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.005288] Memory: 1033552k/1047424k available (2593k kernel code, 13388k reserved, 1145k data, 184k init, 0k highmem)
[ 15.016075] virtual kernel memory layout:
[ 15.016077] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 15.016081] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 15.016084] vmalloc : 0xc0800000 - 0xffbfe000 (1011 MB)
[ 15.016087] lowmem : 0x80000000 - 0xbfee0000 (1022 MB)
[ 15.016090] .init : 0x804aa000 - 0x804d8000 ( 184 kB)
[ 15.016093] .data : 0x80388720 - 0x804a6dbc (1145 kB)
[ 15.016096] .text : 0x80100000 - 0x80388720 (2593 kB)
[ 15.060188] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.148426] Calibrating delay using timer specific routine.. 3002.32 BogoMIPS (lpj=6004643)
[ 15.156857] Security Framework v1.0.0 initialized
[ 15.161589] Mount-cache hash table entries: 512
[ 15.166285] CPU: After generic identify, caps: a7c9bbff 00100000 00000000 00000000 00000181 00000000 00000000 00000000
[ 15.166303] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 15.173433] CPU: L2 Cache: 128K (64 bytes/line)
[ 15.177960] CPU: After all inits, caps: 27c9bbff 00100000 00000000 00000000 00000181 00003fcc 00000000 00000000
[ 15.177980] Compat vDSO mapped to ffffe000.
[ 15.182174] CPU: Centaur VIA Esther processor 1500MHz stepping 09
[ 15.188300] Checking 'hlt' instruction... OK.
[ 15.205044] ACPI: Core revision 20070126
[ 15.214086] Parsing all Control Methods:
[ 15.218032] Table [DSDT](id 0001) - 676 Objects with 57 Devices 178 Methods 38 Regions
[ 15.226134] tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired
[ 15.234256] ACPI: setting ELCR to 0200 (from 0ea0)
[ 15.266502] evxfevnt-0091 [00] enable : Transition to ACPI mode successful
[ 15.380608] NET: Registered protocol family 16
[ 15.385280] ACPI: bus type pci registered
[ 15.397856] PCI: PCI BIOS revision 2.10 entry at 0xfa9b0, last bus=1
[ 15.404208] PCI: Using configuration type 1
[ 15.408389] Setting up standard PCI resources
[ 15.415770] evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
[ 15.424744] evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 Runtime GPEs in this block
[ 15.434348] ACPI: EC: Look up EC in DSDT
[ 15.440740] Completing Region/Field/Buffer/Package initialization:.........................................................................
[ 15.457628] Initialized 23/38 Regions 18/18 Fields 18/18 Buffers 14/24 Packages (685 nodes)
[ 15.466162] Initializing Device/Processor/Thermal objects by executing _INI methods:..
[ 15.475939] Executed 2 _INI methods requiring 1 _STA executions (examined 61 objects)
[ 15.484013] ACPI: Interpreter enabled
[ 15.487679] ACPI: (supports S0 S1 S5)
[ 15.491404] ACPI: Using PIC for interrupt routing
[ 15.508082] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.514008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.603552] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *7 10 11 12)
[ 15.610379] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 15.617383] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 15.624191] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[ 15.630938] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 15.638840] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 15.646733] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 15.654633] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 15.662610] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
[ 15.669089] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 15.674591] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 15.680160] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[ 15.686489] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.692194] pnp: PnP ACPI init
[ 15.695264] ACPI: bus type pnp registered
[ 15.705810] pnp: PnP ACPI: found 10 devices
[ 15.710014] ACPI: ACPI bus type pnp unregistered
[ 15.714958] SCSI subsystem initialized
[ 15.718858] usbcore: registered new interface driver usbfs
[ 15.724424] usbcore: registered new interface driver hub
[ 15.729789] usbcore: registered new device driver usb
[ 15.735063] PCI: Using ACPI for IRQ routing
[ 15.739249] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.771871] NET: Registered protocol family 8
[ 15.776230] NET: Registered protocol family 20
[ 15.783850] Time: tsc clocksource has been installed.
[ 15.795894] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 15.802679] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 15.809462] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 15.816246] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 15.823037] pnp: 00:02: ioport range 0x400-0x47f has been reserved
[ 15.829216] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[ 15.865864] PCI: Bridge: 0000:00:01.0
[ 15.869533] IO window: e000-efff
[ 15.872941] MEM window: fde00000-fdefffff
[ 15.877126] PREFETCH window: fdd00000-fddfffff
[ 15.881764] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 15.881831] NET: Registered protocol family 2
[ 15.923781] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.931174] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 15.940310] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.947441] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.954072] TCP reno registered
[ 15.968368] Total HugeTLB memory allocated, 0
[ 15.972853] VFS: Disk quotas dquot_6.5.1
[ 15.976796] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.983544] io scheduler noop registered
[ 15.987468] io scheduler anticipatory registered
[ 15.992082] io scheduler deadline registered
[ 15.996376] io scheduler cfq registered (default)
[ 16.001095] PCI: VIA PCI bridge detected. Disabling DAC.
[ 16.163498] 0000:00:10.4 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 16.170202] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 16.176025] input: Power Button (FF) as /devices/virtual/input/input0
[ 16.182469] ACPI: Power Button (FF) [PWRF]
[ 16.186687] input: Power Button (CM) as /devices/virtual/input/input1
[ 16.193123] ACPI: Power Button (CM) [PWRB]
[ 16.197298] ACPI: Fan [FAN] (on)
[ 16.200826] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 16.206458] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 16.213644] ACPI: Thermal Zone [THRM] (40 C)
[ 16.283093] Real Time Clock Driver v1.12ac
[ 16.287378] Non-volatile memory driver v1.2
[ 16.291593] VIA RNG detected
[ 16.294522] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 16.303473] Hangcheck: Using get_cycles().
[ 16.307589] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
[ 16.315427] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.321699] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.328320] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.334423] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 16.340612] loop: module loaded
[ 16.343932] PPP generic driver version 2.4.2
[ 16.348294] PPP Deflate Compression module registered
[ 16.353361] PPP BSD Compression module registered
[ 16.358151] PPP MPPE Compression module registered
[ 16.363048] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 16.369027] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 16.374776] PCI: setting IRQ 10 as level-triggered
[ 16.374784] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 16.383840] eth0: RTL8169sc/8110sc at 0xc080e000, 00:30:18:b0:25:c2, XID 18000000 IRQ 10
[ 16.392591] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 16.398497] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 16.404246] PCI: setting IRQ 11 as level-triggered
[ 16.404254] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 16.413265] eth1: RTL8169sc/8110sc at 0xc0810000, 00:30:18:b0:25:c3, XID 18000000 IRQ 11
[ 16.422037] netconsole: device eth0 not up yet, forcing it
[ 16.427846] r8169: eth0: link down
[ 19.176561] r8169: eth0: link up
[ 19.194082] console [netcon0] enabled
[ 20.216942] netconsole: network logging started
[ 20.221483] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.227843] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.235979] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[ 20.242323] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7
[ 20.247995] PCI: setting IRQ 7 as level-triggered
[ 20.248003] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
[ 20.256586] PCI: VIA VLink IRQ fixup for 0000:00:0f.0, from 255 to 7
[ 20.262973] VP_IDE: chipset revision 6
[ 20.266733] VP_IDE: not 100% native mode: will probe irqs later
[ 20.272666] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[ 20.280158] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
[ 20.287445] Probing IDE interface ide0...
[ 20.325031] Marking TSC unstable due to: possible TSC halt in C2.
[ 20.331123] Time: acpi_pm clocksource has been installed.
[ 20.704825] hda: WDC WD1200VE-00KWT0, ATA DISK drive
[ 21.380151] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 21.388161] hda: selected mode 0x42
[ 21.388250] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 21.393056] hda: max request size: 512KiB
[ 21.455752] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
[ 21.464184] hda: cache flushes supported
[ 21.468161] hda: hda1
[ 21.477250] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 21.486028] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 21.491351] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 21.498815] ehci_hcd 0000:00:10.4: irq 10, io mem 0xfdffd000
[ 21.504502] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.512249] usb usb1: configuration #1 chosen from 1 choice
[ 21.517899] hub 1-0:1.0: USB hub found
[ 21.521677] hub 1-0:1.0: 8 ports detected
[ 21.628049] USB Universal Host Controller Interface driver v3.0
[ 21.634108] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
[ 21.642712] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 21.648005] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 21.655433] uhci_hcd 0000:00:10.0: irq 7, io base 0x0000fe00
[ 21.661353] usb usb2: configuration #1 chosen from 1 choice
[ 21.667011] hub 2-0:1.0: USB hub found
[ 21.670797] hub 2-0:1.0: 2 ports detected
[ 21.775890] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 7 (level, low) -> IRQ 7
[ 21.784482] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 21.789773] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 21.797200] uhci_hcd 0000:00:10.1: irq 7, io base 0x0000fd00
[ 21.803109] usb usb3: configuration #1 chosen from 1 choice
[ 21.808762] hub 3-0:1.0: USB hub found
[ 21.812536] hub 3-0:1.0: 2 ports detected
[ 21.920560] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 21.926345] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 21.935107] PCI: VIA VLink IRQ fixup for 0000:00:10.2, from 5 to 11
[ 21.941404] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 21.946735] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 21.954168] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000fc00
[ 21.960199] usb usb4: configuration #1 chosen from 1 choice
[ 21.965859] hub 4-0:1.0: USB hub found
[ 21.969637] hub 4-0:1.0: 2 ports detected
[ 22.075619] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 22.084399] PCI: VIA VLink IRQ fixup for 0000:00:10.3, from 5 to 11
[ 22.090699] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 22.095992] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 22.103425] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000fb00
[ 22.109415] usb usb5: configuration #1 chosen from 1 choice
[ 22.115071] hub 5-0:1.0: USB hub found
[ 22.118846] hub 5-0:1.0: 2 ports detected
[ 22.139375] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 22.329683] usb 2-1: configuration #1 chosen from 1 choice
[ 23.230391] usbcore: registered new interface driver usblp
[ 23.235903] Initializing USB Mass Storage driver...
[ 23.240875] usbcore: registered new interface driver usb-storage
[ 23.246892] USB Mass Storage support registered.
[ 23.251680] PNP: No PS/2 controller found. Probing ports directly.
[ 23.506189] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.511290] mice: PS/2 mouse device common for all mice
[ 23.516687] i2c /dev entries driver
[ 23.520501] f71805f: Found F71805F/FG chip at 0x290, revision 19
[ 23.918166] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
[ 23.926741] padlock: Using VIA PadLock ACE for AES algorithm.
[ 23.932501] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.
[ 23.939102] Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
[ 23.948323] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 23.957225] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 24.471419] ALSA device list:
[ 24.474442] #0: VIA 8237 with ALC655 at 0xf400, irq 10
[ 24.479813] Netfilter messages via NETLINK v0.30.
[ 24.484642] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 24.490812] ctnetlink v0.93: registering with nfnetlink.
[ 24.496178] IPv4 over IPv4 tunneling driver
[ 24.500581] GRE over IPv4 tunneling driver
[ 24.505138] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.510561] ClusterIP Version 0.8 loaded successfully
[ 24.515629] TCP bic registered
[ 24.518695] TCP cubic registered
[ 24.521934] TCP westwood registered
[ 24.525431] TCP highspeed registered
[ 24.529001] TCP hybla registered
[ 24.532243] TCP htcp registered
[ 24.535398] TCP vegas registered
[ 24.538639] TCP veno registered
[ 24.541790] TCP scalable registered
[ 24.545287] TCP lp registered
[ 24.548251] TCP yeah registered
[ 24.551407] TCP illinois registered
[ 24.554907] Initializing XFRM netlink socket
[ 24.559235] NET: Registered protocol family 1
[ 24.563686] NET: Registered protocol family 10
[ 24.568252] lo: Disabled Privacy Extensions
[ 24.572570] tunl0: Disabled Privacy Extensions
[ 24.577102] Mobile IPv6
[ 24.579595] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 24.585041] IPv6 over IPv4 tunneling driver
[ 24.589473] sit0: Disabled Privacy Extensions
[ 24.593998] NET: Registered protocol family 17
[ 24.598469] NET: Registered protocol family 15
[ 24.602979] Bridge firewalling registered
[ 24.607005] Ebtables v2.0 registered
[ 24.610618] 802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
[ 24.617408] All bugs added by David S. Miller <[email protected]>
[ 24.623704] CPU0 - ACPI performance management activated.
[ 24.629116] *P0: 1500 MHz, 15000 mW, 10 µs
[ 24.633742] P1: 800 MHz, 8000 mW, 10 µs
[ 24.638582] Using IPI Shortcut mode
[ 24.689701] kjournald starting. Commit interval 5 seconds
[ 24.695233] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.701177] VFS: Mounted root (ext3 filesystem) readonly.
[ 24.706864] Freeing unused kernel memory: 184k freed
[ 24.712029] Write protecting the kernel text: 2596k
[ 24.716975] Write protecting the kernel read-only data: 926k
--
Simon Arlott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
