These are upstream patches I collected while Jeff is away. Thanks.
* workaround for ATAPI tape drives
* detection/suspend workarounds for several laptops
* ICH8/9 port_enable fix
ata_piix controller ID reorganization is included to ease the fixes.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/tj/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ata_piix.c | 87 ++++++++++++++++++++++++++++------------
drivers/ata/libata-core.c | 100 +++++++---------------------------------------
drivers/ata/libata-eh.c | 95 -------------------------------------------
drivers/ata/libata-scsi.c | 3 -
drivers/ata/pata_sis.c | 1
include/linux/libata.h | 5 --
6 files changed, 81 insertions(+), 210 deletions(-)
Adrian Bunk (1):
libata: remove unused functions
Albert Lee (2):
libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives
Gabriel C (1):
pata_sis.c: Add Packard Bell EasyNote K5305 to laptops
Mark Lord (1):
libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs
Tejun Heo (3):
ata_piix: add SATELLITE U205 to broken suspend list
ata_piix: reorganize controller IDs
ata_piix: port enable for the first SATA controller of ICH8 is 0xf not 0x3
Thomas Rohwer (1):
ata_piix: only enable the first port on apple macbook pro
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 328ce8a..671e796 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -119,18 +119,19 @@ enum {
PIIX_80C_SEC = (1 << 7) | (1 << 6),
/* controller IDs */
- piix_pata_33 = 0, /* PIIX4 at 33Mhz */
- ich_pata_33 = 1, /* ICH up to UDMA 33 only */
- ich_pata_66 = 2, /* ICH up to 66 Mhz */
- ich_pata_100 = 3, /* ICH up to UDMA 100 */
- ich5_sata = 5,
- ich6_sata = 6,
- ich6_sata_ahci = 7,
- ich6m_sata_ahci = 8,
- ich8_sata_ahci = 9,
- piix_pata_mwdma = 10, /* PIIX3 MWDMA only */
- tolapai_sata_ahci = 11,
- ich9_2port_sata = 12,
+ piix_pata_mwdma = 0, /* PIIX3 MWDMA only */
+ piix_pata_33, /* PIIX4 at 33Mhz */
+ ich_pata_33, /* ICH up to UDMA 33 only */
+ ich_pata_66, /* ICH up to 66 Mhz */
+ ich_pata_100, /* ICH up to UDMA 100 */
+ ich5_sata,
+ ich6_sata,
+ ich6_sata_ahci,
+ ich6m_sata_ahci,
+ ich8_sata_ahci,
+ ich8_2port_sata,
+ ich8m_apple_sata_ahci, /* locks up on second port enable */
+ tolapai_sata_ahci,
/* constants for mapping table */
P0 = 0, /* port 0 */
@@ -239,19 +240,21 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller 2 IDE (ICH8) */
- { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ /* Mobile SATA Controller IDE (ICH8M), Apple */
+ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2926, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x2928, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich9_2port_sata },
+ { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
/* SATA Controller IDE (Tolapai) */
@@ -427,7 +430,7 @@ static const struct piix_map_db ich6m_map_db = {
static const struct piix_map_db ich8_map_db = {
.mask = 0x3,
- .port_enable = 0x3,
+ .port_enable = 0xf,
.map = {
/* PM PS SM SS MAP */
{ P0, P2, P1, P3 }, /* 00b (hardwired when in AHCI) */
@@ -437,7 +440,7 @@ static const struct piix_map_db ich8_map_db = {
},
};
-static const struct piix_map_db tolapai_map_db = {
+static const struct piix_map_db ich8_2port_map_db = {
.mask = 0x3,
.port_enable = 0x3,
.map = {
@@ -449,7 +452,19 @@ static const struct piix_map_db tolapai_map_db = {
},
};
-static const struct piix_map_db ich9_2port_map_db = {
+static const struct piix_map_db ich8m_apple_map_db = {
+ .mask = 0x3,
+ .port_enable = 0x1,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, NA, NA }, /* 00b */
+ { RV, RV, RV, RV },
+ { P0, P2, IDE, IDE }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
+static const struct piix_map_db tolapai_map_db = {
.mask = 0x3,
.port_enable = 0x3,
.map = {
@@ -467,11 +482,21 @@ static const struct piix_map_db *piix_map_db_table[] = {
[ich6_sata_ahci] = &ich6_map_db,
[ich6m_sata_ahci] = &ich6m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
+ [ich8_2port_sata] = &ich8_2port_map_db,
+ [ich8m_apple_sata_ahci] = &ich8m_apple_map_db,
[tolapai_sata_ahci] = &tolapai_map_db,
- [ich9_2port_sata] = &ich9_2port_map_db,
};
static struct ata_port_info piix_port_info[] = {
+ [piix_pata_mwdma] = /* PIIX3 MWDMA only */
+ {
+ .sht = &piix_sht,
+ .flags = PIIX_PATA_FLAGS,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+ .port_ops = &piix_pata_ops,
+ },
+
[piix_pata_33] = /* PIIX4 at 33MHz */
{
.sht = &piix_sht,
@@ -565,13 +590,15 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_sata_ops,
},
- [piix_pata_mwdma] = /* PIIX3 MWDMA only */
+ [ich8_2port_sata] =
{
.sht = &piix_sht,
- .flags = PIIX_PATA_FLAGS,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
- .port_ops = &piix_pata_ops,
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
},
[tolapai_sata_ahci] =
@@ -585,7 +612,7 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_sata_ops,
},
- [ich9_2port_sata] =
+ [ich8m_apple_sata_ahci] =
{
.sht = &piix_sht,
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
@@ -595,6 +622,7 @@ static struct ata_port_info piix_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
+
};
static struct pci_bits piix_enable_bits[] = {
@@ -974,6 +1002,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "SATELLITE U205",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE U205"),
+ },
+ },
+ {
.ident = "Portege M500",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8189803..f7f6ca9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2307,8 +2307,10 @@ int ata_dev_configure(struct ata_device *dev)
}
if ((dev->class == ATA_DEV_ATAPI) &&
- (atapi_command_packet_set(id) == TYPE_TAPE))
+ (atapi_command_packet_set(id) == TYPE_TAPE)) {
dev->max_sectors = ATA_MAX_SECTORS_TAPE;
+ dev->horkage |= ATA_HORKAGE_STUCK_ERR;
+ }
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
@@ -2581,81 +2583,6 @@ void sata_print_link_status(struct ata_link *link)
}
/**
- * __sata_phy_reset - Wake/reset a low-level SATA PHY
- * @ap: SATA port associated with target SATA PHY.
- *
- * This function issues commands to standard SATA Sxxx
- * PHY registers, to wake up the phy (and device), and
- * clear any reset condition.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- */
-void __sata_phy_reset(struct ata_port *ap)
-{
- struct ata_link *link = &ap->link;
- unsigned long timeout = jiffies + (HZ * 5);
- u32 sstatus;
-
- if (ap->flags & ATA_FLAG_SATA_RESET) {
- /* issue phy wake/reset */
- sata_scr_write_flush(link, SCR_CONTROL, 0x301);
- /* Couldn't find anything in SATA I/II specs, but
- * AHCI-1.1 10.4.2 says at least 1 ms. */
- mdelay(1);
- }
- /* phy wake/clear reset */
- sata_scr_write_flush(link, SCR_CONTROL, 0x300);
-
- /* wait for phy to become ready, if necessary */
- do {
- msleep(200);
- sata_scr_read(link, SCR_STATUS, &sstatus);
- if ((sstatus & 0xf) != 1)
- break;
- } while (time_before(jiffies, timeout));
-
- /* print link status */
- sata_print_link_status(link);
-
- /* TODO: phy layer with polling, timeouts, etc. */
- if (!ata_link_offline(link))
- ata_port_probe(ap);
- else
- ata_port_disable(ap);
-
- if (ap->flags & ATA_FLAG_DISABLED)
- return;
-
- if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
- ata_port_disable(ap);
- return;
- }
-
- ap->cbl = ATA_CBL_SATA;
-}
-
-/**
- * sata_phy_reset - Reset SATA bus.
- * @ap: SATA port associated with target SATA PHY.
- *
- * This function resets the SATA bus, and then probes
- * the bus for devices.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- */
-void sata_phy_reset(struct ata_port *ap)
-{
- __sata_phy_reset(ap);
- if (ap->flags & ATA_FLAG_DISABLED)
- return;
- ata_bus_reset(ap);
-}
-
-/**
* ata_dev_pair - return other device on cable
* @adev: device
*
@@ -5490,11 +5417,19 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
- "error, dev_stat 0x%X\n", status);
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
+ /* Some ATAPI tape drives forget to clear the ERR bit
+ * when doing the next command (mostly request sense).
+ * We ignore ERR here to workaround and proceed sending
+ * the CDB.
+ */
+ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X\n", status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
}
/* Send the CDB (atapi) or the first data block (ata pio out).
@@ -7653,8 +7588,6 @@ EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(sata_phy_reset);
-EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_std_prereset);
EXPORT_SYMBOL_GPL(ata_std_softreset);
@@ -7725,7 +7658,6 @@ EXPORT_SYMBOL_GPL(ata_port_desc);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
EXPORT_SYMBOL_GPL(ata_link_abort);
EXPORT_SYMBOL_GPL(ata_port_abort);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ed8813b..0dac69d 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -559,101 +559,6 @@ void ata_port_wait_eh(struct ata_port *ap)
}
}
-/**
- * ata_qc_timeout - Handle timeout of queued command
- * @qc: Command that timed out
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * TODO: kill this function once old EH is gone.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-static void ata_qc_timeout(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- u8 host_stat = 0, drv_stat;
- unsigned long flags;
-
- DPRINTK("ENTER\n");
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- spin_lock_irqsave(ap->lock, flags);
-
- switch (qc->tf.protocol) {
-
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- host_stat = ap->ops->bmdma_status(ap);
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- /* fall through */
-
- default:
- ata_altstatus(ap);
- drv_stat = ata_chk_status(ap);
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, "
- "stat 0x%x host_stat 0x%x\n",
- qc->tf.command, drv_stat, host_stat);
-
- /* complete taskfile transaction */
- qc->err_mask |= AC_ERR_TIMEOUT;
- break;
- }
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_eh_qc_complete(qc);
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eng_timeout - Handle timeout of queued command
- * @ap: Port on which timed-out command is active
- *
- * Some part of the kernel (currently, only the SCSI layer)
- * has noticed that the active command on port @ap has not
- * completed after a specified length of time. Handle this
- * condition by disabling DMA (if necessary) and completing
- * transactions, with error if necessary.
- *
- * This also handles the case of the "lost interrupt", where
- * for some reason (possibly hardware bug, possibly driver bug)
- * an interrupt was not delivered to the driver, even though the
- * transaction completed successfully.
- *
- * TODO: kill this function once old EH is gone.
- *
- * LOCKING:
- * Inherited from SCSI layer (none, can sleep)
- */
-void ata_eng_timeout(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- ata_qc_timeout(ata_qc_from_tag(ap, ap->link.active_tag));
-
- DPRINTK("EXIT\n");
-}
-
static int ata_eh_nr_in_flight(struct ata_port *ap)
{
unsigned int tag;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 94144ed..a45f6ac 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2869,7 +2869,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
xlat_func = NULL;
if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
/* relay SCSI command to ATAPI device */
- if (unlikely(scmd->cmd_len > dev->cdb_len))
+ int len = COMMAND_SIZE(scsi_op);
+ if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
goto bad_cdb_len;
xlat_func = atapi_xlat;
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 3b5be77..87546d9 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -55,6 +55,7 @@ static const struct sis_laptop sis_laptop[] = {
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
+ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 56a5673..ef52a07 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -340,6 +340,7 @@ enum {
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
+ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -771,8 +772,6 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
extern void sata_print_link_status(struct ata_link *link);
extern void ata_port_probe(struct ata_port *);
-extern void __sata_phy_reset(struct ata_port *ap);
-extern void sata_phy_reset(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
extern int sata_set_spd(struct ata_link *link);
extern int sata_link_debounce(struct ata_link *link,
@@ -994,8 +993,6 @@ extern void sata_pmp_do_eh(struct ata_port *ap,
/*
* EH
*/
-extern void ata_eng_timeout(struct ata_port *ap);
-
extern void ata_port_schedule_eh(struct ata_port *ap);
extern int ata_link_abort(struct ata_link *link);
extern int ata_port_abort(struct ata_port *ap);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
