Re: [BUG] 2.6.24-rc2-mm1 - kernel bug on nfs v4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Nov 17, 2007 at 08:40:22PM +0100, Torsten Kaiser wrote:

> Lockdep triggers immedetly before the freeze, but the result is still
> not helpful:
> 
> [  221.565011] INFO: trying to register non-static key.
> [  221.566999] the code is fine but needs lockdep annotation.
> [  221.569206] turning off the locking correctness validator.
> [  221.571404]
> [  221.571405] Call Trace:
> [  221.572996]  [<ffffffff8025a1b4>] __lock_acquire+0x4c4/0x1140
> [  221.575298]  [<ffffffff8025ae85>] lock_acquire+0x55/0x70
> [  221.577429]  [<ffffffff8022d6fd>] __wake_up+0x2d/0x70
> [  221.579457]  [<ffffffff805c5f04>] _spin_lock_irqsave+0x34/0x50
> [  221.581800]  [<ffffffff805c5e45>] _spin_unlock_irqrestore+0x55/0x70
> [  221.584317]  [<ffffffff8022d6fd>] __wake_up+0x2d/0x70
> [  221.586344]  [<ffffffff805a88b0>] rpc_async_schedule+0x0/0x10
> [  221.588648]  [<ffffffff802fface>] nfs_free_unlinkdata+0x1e/0x50
> [  221.591023]  [<ffffffff805a7e96>] rpc_release_calldata+0x26/0x50
> [  221.593428]  [<ffffffff8024778f>] run_workqueue+0x16f/0x210
> [  221.595662]  [<ffffffff80259731>] trace_hardirqs_on+0xc1/0x160
> [  221.598004]  [<ffffffff802483d0>] worker_thread+0x0/0xb0
> [  221.600130]  [<ffffffff802483d0>] worker_thread+0x0/0xb0
> [  221.602265]  [<ffffffff8024843d>] worker_thread+0x6d/0xb0
> [  221.604431]  [<ffffffff8024bfc0>] autoremove_wake_function+0x0/0x30
> [  221.606939]  [<ffffffff802483d0>] worker_thread+0x0/0xb0
> [  221.609067]  [<ffffffff802483d0>] worker_thread+0x0/0xb0
> [  221.611199]  [<ffffffff8024bbeb>] kthread+0x4b/0x80
> [  221.613156]  [<ffffffff8020cb98>] child_rip+0xa/0x12
> [  221.615151]  [<ffffffff8020c2af>] restore_args+0x0/0x30
> [  221.617247]  [<ffffffff8024bba0>] kthread+0x0/0x80
> [  221.619162]  [<ffffffff8020cb8e>] child_rip+0x0/0x12
> [  221.621147]
> [  221.621749] INFO: lockdep is turned off.

I've been staring at this NFS code for a while an can't make any sense
out of it. It seems to correctly initialize the waitqueue. So this would
indicate corruption of some sort.



> I also had another BUG output during system startup, but that should
> be unrelated:
> [  103.254681] BUG: sleeping function called from invalid context at
> kernel/rwsem.c:20
> [  103.257757] in_atomic():0, irqs_disabled():1
> [  103.259469] 1 lock held by artsd/5883:
> [  103.259470]  #0:  (pm_qos_lock){....}, at: [<ffffffff80250efb>]
> pm_qos_add_requirement+0x6b/0xf0
> [  103.263316] irq event stamp: 49712
> [  103.263318] hardirqs last  enabled at (49711): [<ffffffff802941ed>]
> __kmalloc+0x10d/0x180
> [  103.263321] hardirqs last disabled at (49712): [<ffffffff805c5eea>]
> _spin_lock_irqsave+0x1a/0x50
> [  103.263326] softirqs last  enabled at (48820): [<ffffffff805954d9>]
> unix_release_sock+0x79/0x240
> [  103.263330] softirqs last disabled at (48818): [<ffffffff805c5b89>]
> _write_lock_bh+0x9/0x30
> [  103.263333]
> [  103.263333] Call Trace:
> [  103.263335]  [<ffffffff8024fc25>] down_read+0x15/0x40
> [  103.263338]  [<ffffffff802507e6>] __blocking_notifier_call_chain+0x46/0x90
> [  103.263341]  [<ffffffff80250f23>] pm_qos_add_requirement+0x93/0xf0
> [  103.263344]  [<ffffffff804fdc4a>] snd_pcm_hw_params+0x2fa/0x380
> [  103.263347]  [<ffffffff804fe93c>] snd_pcm_common_ioctl1+0xb4c/0xdc0
> [  103.263350]  [<ffffffff8027b167>] __do_fault+0x227/0x470
> [  103.263353]  [<ffffffff8025a435>] __lock_acquire+0x745/0x1140
> [  103.263357]  [<ffffffff805c5e45>] _spin_unlock_irqrestore+0x55/0x70
> [  103.263359]  [<ffffffff80259731>] trace_hardirqs_on+0xc1/0x160
> [  103.263362]  [<ffffffff804fee88>] snd_pcm_playback_ioctl1+0x48/0x240
> [  103.263365]  [<ffffffff804ffa36>] snd_pcm_playback_ioctl+0x36/0x50
> [  103.263367]  [<ffffffff802a80bf>] vfs_ioctl+0x2f/0xa0
> [  103.263369]  [<ffffffff802a8390>] do_vfs_ioctl+0x260/0x2e0
> [  103.263371]  [<ffffffff80259731>] trace_hardirqs_on+0xc1/0x160
> [  103.263373]  [<ffffffff802a84a1>] sys_ioctl+0x91/0xb0
> [  103.263376]  [<ffffffff8020bc5e>] system_call+0x7e/0x83
> [  103.263379]

This pm-qos code is fubar, it calls blocking_notifier_call_chain while
holding a spinlock (and that is after 'fixing' it from a
srcu_notifier_call_chain - which is equally wrong).

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux