Subject: PNP: Increase the value of PNP constant
From: Zhao Yakui <[email protected]>
On some systems the number of resources(IO,MEM) returnedy by PNP
device is greater than the PNP constant, for example motherboard devices.
It brings that some resources can't be reserved and resource confilicts.
This will cause PCI resources are assigned wrongly in some systems, and
cause hang. This is a regression since we deleted ACPI motherboard
driver and use PNP system driver.
Andrew, I thought this is an urgent issue and should be fixed ASAP, and
this is a good candidate for -stable tree
Signed-off-by: Li Shaohua <[email protected]>
Signed-off-by: Zhao Yakui <[email protected]>
---
drivers/pnp/pnpacpi/rsparser.c | 18 ++++++++++++++++--
include/linux/pnp.h | 4 ++--
2 files changed, 18 insertions(+), 4 deletions(-)
Index: linux-2.6.24-rc2/include/linux/pnp.h
===================================================================
--- linux-2.6.24-rc2.orig/include/linux/pnp.h
+++ linux-2.6.24-rc2/include/linux/pnp.h
@@ -13,8 +13,8 @@
#include <linux/errno.h>
#include <linux/mod_devicetable.h>
-#define PNP_MAX_PORT 8
-#define PNP_MAX_MEM 4
+#define PNP_MAX_PORT 24
+#define PNP_MAX_MEM 12
#define PNP_MAX_IRQ 2
#define PNP_MAX_DMA 2
#define PNP_NAME_LEN 50
Index: linux-2.6.24-rc2/drivers/pnp/pnpacpi/rsparser.c
===================================================================
--- linux-2.6.24-rc2.orig/drivers/pnp/pnpacpi/rsparser.c
+++ linux-2.6.24-rc2/drivers/pnp/pnpacpi/rsparser.c
@@ -82,9 +82,11 @@ static void pnpacpi_parse_allocated_irqr
while (!(res->irq_resource[i].flags & IORESOURCE_UNSET) &&
i < PNP_MAX_IRQ)
i++;
- if (i >= PNP_MAX_IRQ)
+ if (i >= PNP_MAX_IRQ) {
+ printk(KERN_ERR "Exceed the max number of IRQ resource: "
+ "%d \n",PNP_MAX_IRQ);
return;
-
+ }
#ifdef CONFIG_X86
if (gsi < 16 && (triggering != ACPI_EDGE_SENSITIVE ||
polarity != ACPI_ACTIVE_HIGH)) {
@@ -173,6 +175,10 @@ static void pnpacpi_parse_allocated_dmar
}
res->dma_resource[i].start = dma;
res->dma_resource[i].end = dma;
+ } else {
+ printk(KERN_ERR "Exceed the max number of DMA resource: "
+ "%d \n",PNP_MAX_DMA);
+ return;
}
}
@@ -194,6 +200,10 @@ static void pnpacpi_parse_allocated_iore
}
res->port_resource[i].start = io;
res->port_resource[i].end = io + len - 1;
+ } else {
+ printk(KERN_ERR "Exceed the max number of IO Resource: "
+ "%d \n",PNP_MAX_PORT);
+ return;
}
}
@@ -217,6 +227,10 @@ static void pnpacpi_parse_allocated_memr
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
+ } else {
+ printk(KERN_ERR "Exceed the max number of Mem Resource: "
+ "%d \n",PNP_MAX_MEM);
+ return;
}
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
