On November 15, 2007 06:02:09 am Andy Whitcroft wrote:
> When testing some of the later 2.6.24-rc2-mm1+hotfix combinations on three
> of our test systems one job from each batch (1/4) failed. In each case the
> machine appears to have booted normally all the way to a login: prompt.
> However in the failed boots the networking though apparently initialised
> completely and correctly (as far as I can tell from the console output), is
> reported as not responding to ssh connections. The network interface seems
> to have been initialised on the right port, and the ssh daemons started.
> Two of the machines are powerpc boxes, the other an older x86_64.
> One machine is 4/4 in testing, just one. Most of the other machines are
> still not able to compile this stack so do not contribute to our knowledge.
> Any ideas?
I see this as well - the computer boots fine but no network. The only clues
in the dmesg are:
[ 294.097876] warning: process `dhclient' gets w/ old libcap
[ 294.097893] warning: process `dhclient' sets w/ old libcap
So I'll try backing up the patch series to before:
or so, and see if that's the problem. If anyone has any other ideas, let me
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Video 4 Linux]
[Linux for the blind]