Boaz Harrosh wrote:
> On Thu, Nov 15 2007 at 19:15 +0200, Matthew Dharm <[email protected]> wrote:
>> On Wed, Nov 14, 2007 at 10:23:09AM +0100, Gabriel C wrote:
>>> Matthew Dharm wrote:
>>>> On Wed, Nov 14, 2007 at 06:33:39AM +0100, Gabriel C wrote:
>>>>> Matthew Dharm wrote:
>>>>>> On Tue, Nov 13, 2007 at 07:49:24PM -0800, Greg KH wrote:
>>>>>>> Matt, are these the errors you were worried about with the patch we were
>>>>>>> just talking about tha tis in my tree?
>>>>>> I can't tell from these logs.
>>>>> There is the dmesg with CONFIG_USB_STORAGE_DEBUG :
>>>>>
>>>>> http://194.231.229.228/dmesg-2.6.24-rc2-mm1
>>>> Good news: This isn't the bug Greg was worried about.
>>>>
>>>> Bad news: Something is seriously strange here. Note the following from the
>>>> logs:
>>>>
>>>> Nov 14 06:07:43 lara [ 41.890614] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
>>>> Nov 14 06:07:43 lara [ 41.890616] usb-storage: -- unexpectedly short transfer
>>>>
>>>> Note the 'R' value of zero -- this is the residue value. It indicates a
>>>> complete transfer, and that matches the log lines immediately previous
>>>> which indicate a 4K transfer which completed properly.
>>>>
>>>> If residue is zero, then srb->resid should be zero. Take a look in
>>>> linux/usb/storage/transport.c in usb_stor_Bulk_transport()
>>>>
>>>> If srb->resid is zero, then you should NEVER get the "unexpectedly short
>>>> transfer" message. Look at usb_stor_invoke_transport() in the same file.
>>> That code got replaced recently but I have no idea about it.
>>>
>>> ( http://git.kernel.org/?p=linux/kernel/git/jejb/scsi-misc-2.6.git;a=shortlog see the patches from Boaz Harrosh)
>>>
>>> srb->resid got replaced by scsi_get_resid() it I see that right.
>>>
>>> I'm CC'ing the author , he will know I think.
>> The replacement looks, to my eye, to be logically correct. The patch was
>> pretty clean.
>>
>> Then again, I haven't looked at what is "under the hood" of the accessor
>> functions. Perhaps there is a side-effect somewhere in there?
>>
>> Perhaps a quick debugging test -- print the value of scsi_get_resid(srb)
>> just after it's initialized to zero at the top of
>> usb_stor_invoke_transport(), and then just after the call to
>> us->transport().
>>
>
> I have found the bug. My bad sorry about that. Patch below
> It is because I switched from use of usb_stor_bulk_transfer_sg()
> to usb_stor_bulk_transfer_sglist, but forgot the residual handling.
Your patch fixes the problem. Thx.
>
> (Please send scsi bugs to scsi list. My lkml mental filters are
> much higher, Sorry for not seeing this yesterday)
Uhh sorry I forgot to CC linux-scsi =)
>
> ----
> From: Boaz Harrosh <[email protected]>
> Date: Thu, 15 Nov 2007 20:07:56 +0200
> Subject: [PATCH] Fix bug in last usb accessor patch
>
>>>> Bad news: Something is seriously strange here. Note the following from the
>>>> logs:
>>>>
>>>> Nov 14 06:07:43 lara [ 41.890614] usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
>>>> Nov 14 06:07:43 lara [ 41.890616] usb-storage: -- unexpectedly short transfer
>>>>
>>>> Note the 'R' value of zero -- this is the residue value. It indicates a
>>>> complete transfer, and that matches the log lines immediately previous
>>>> which indicate a 4K transfer which completed properly.
>>>>
>>>> If residue is zero, then srb->resid should be zero. Take a look in
>>>> linux/usb/storage/transport.c in usb_stor_Bulk_transport()
>>>>
>>>> If srb->resid is zero, then you should NEVER get the "unexpectedly short
>>>> transfer" message. Look at usb_stor_invoke_transport() in the same file.
>>> That code got replaced recently but I have no idea about it.
>
> wrong resid handling fixed
>
> Signed-off-by: Boaz Harrosh <[email protected]>
> ---
> drivers/usb/storage/transport.c | 7 ++++---
> 1 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
> index d3a84a2..d9f4912 100644
> --- a/drivers/usb/storage/transport.c
> +++ b/drivers/usb/storage/transport.c
> @@ -465,11 +465,12 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
> int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe,
> struct scsi_cmnd* srb)
> {
> - int resid = scsi_get_resid(srb);
> + unsigned int partial;
> int result = usb_stor_bulk_transfer_sglist(us, pipe, scsi_sglist(srb),
> scsi_sg_count(srb), scsi_bufflen(srb),
> - &resid);
> - scsi_set_resid(srb, resid);
> + &partial);
> +
> + scsi_set_resid(srb, scsi_bufflen(srb) - partial);
> return result;
> }
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]