Re: 2.6.24-rc2-mm1

["Torsten Kaiser" <just.for.lkml@googlemail.com>]

On Nov 14, 2007 2:59 AM, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc2/2.6.24-rc2-mm1/

Breaks nfsv4 in a rather funny way:

treogen ~ # cd /usr/portage/x
treogen x # touch bla
touch: cannot touch `bla': File exists
treogen x # mkdir bla
treogen x # touch bla/bla
touch: cannot touch `bla/bla': File exists
treogen x # ls -lad *
drwxr-xr-x 2 root root 6 Nov 14 20:03 bla
treogen x # ls -la *
total 0
drwxr-xr-x 2 root root  6 Nov 14 20:03 .
drwxr-xr-x 3 root root 16 Nov 14 20:03 ..
treogen x #

So I can create new directories, but not new files. Reading files works normal.

The client is 2.6.24-rc2-mm1, the server 2.6.22-gentoo-r9.
The fstab-line from the client:
192.168.2.4:/portage    /usr/portage            nfs4
rw,noatime,nodiratime,intr 0 0

2.6.23-mm1 as client worked, some 2.6.24-rc1-git? also.

Otherwise the new -mm worked OK for me, no errors visible in the syslog.
It even fixed the ACPI Exception from regression bug 9320.
Now the output is:
[   83.125873] scsi8 : pata_amd
[   83.125917] scsi9 : pata_amd
[   83.127062] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   83.127064] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   83.194917] ata9.01: ATA-7: Maxtor 6L250R0, BAH41G10, max UDMA/133
[   83.194920] ata9.01: 490234752 sectors, multi 16: LBA48
[   83.194929] ata9: nv_mode_filter: 0x7f39f&0x701f->0x701f,
BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14)
[   83.197327] ata9.01: configured for UDMA/33
[   83.197348] ata10: port disabled. ignoring.
[   83.197428] scsi 8:0:1:0: Direct-Access     ATA      Maxtor 6L250R0
  BAH4 PQ: 0 ANSI: 5
[   83.197487] sd 8:0:1:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
[   83.197496] sd 8:0:1:0: [sdd] Write Protect is off
[   83.197498] sd 8:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[   83.197510] sd 8:0:1:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   83.197542] sd 8:0:1:0: [sdd] 490234752 512-byte hardware sectors (251000 MB)
[   83.197549] sd 8:0:1:0: [sdd] Write Protect is off
[   83.197551] sd 8:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[   83.197562] sd 8:0:1:0: [sdd] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[   83.197565]  sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 >
[   83.222911] sd 8:0:1:0: [sdd] Attached SCSI disk
[   83.222944] sd 8:0:1:0: Attached scsi generic sg3 type 0

Just posting this, if someone is interested in the nv_mode_filter-output...
(UDMA/33 is correct, its only a 40-wire cable)

Torsten
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/