At Wed, 14 Nov 2007 08:39:03 -0800,
Roland Dreier wrote:
>
> > Roland Dreier wrote:
> > > > > [ 2311.759856] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
> > > > > [ 2311.759866] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> > > > > [ 2311.759886] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> > > > > [ 2312.911309] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x003f000c
>
> > Anyway, could you try the patch below? As far as I see, it's the only
> > part that may access PINCAP verb for that NID.
>
> This seems to help in that I don't see the "azx_get_response timeout"
> message on every module load as I do with mainline, but I still see a
> problem with a different cmd after a few load-unload cycles:
What cmd more exactly? The below is GET_DIGI_CONVERT. So it must be
related with SPDIF but it must be same as 2.6.23. Or do you happen to
set CONFIG_SND_HDA_POWER_SAVE=y?
Anyway I think there is no real problem with polling mode. The driver
switches to it when the response from the hardware gets confused.
Takashi
> [ 257.503143] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [ 259.215359] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [ 259.215372] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [ 259.215398] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 263.418591] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [ 265.626093] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [ 265.626105] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [ 265.626133] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 320.898290] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [ 322.874182] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [ 322.874196] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [ 322.874228] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 333.087177] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [ 334.024358] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [ 334.024371] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [ 334.024395] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 335.422296] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f0d00
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
